Re: [PATCH v6 1/8] ACPI: CPPC: Add IS_OPTIONAL_CPC_REG macro to judge if a cpc_reg is optional

["zhenglifeng (A)" <zhenglifeng1@huawei.com>]

On 2025/4/10 2:53, Mario Limonciello wrote:
> On 4/9/2025 1:56 AM, Lifeng Zheng wrote:
>> In ACPI 6.5, s8.4.6.1 _CPC (Continuous Performance Control), whether each
>> of the per-cpu cpc_regs[] is mendatory or optional is defined. Since the
> mandatory

Thanks！

>> CPC_SUPPORTED() check is only for optional cpc field, another macro to
>> check if the field is optional is needed.
>>
>> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
>> Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
>> ---
>>   drivers/acpi/cppc_acpi.c | 14 ++++++++++++++
>>   1 file changed, 14 insertions(+)
>>
>> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
>> index f193e713825a..39f019e265da 100644
>> --- a/drivers/acpi/cppc_acpi.c
>> +++ b/drivers/acpi/cppc_acpi.c
>> @@ -129,6 +129,20 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
>>   #define CPC_SUPPORTED(cpc) ((cpc)->type == ACPI_TYPE_INTEGER ?        \
>>                   !!(cpc)->cpc_entry.int_value :        \
>>                   !IS_NULL_REG(&(cpc)->cpc_entry.reg))
>> +
>> +/*
>> + * Each bit indicates the optionality of the register in per-cpu
>> + * cpc_regs[] with the corresponding index. 0 means mandatory and 1
>> + * means optional.
>> + */
>> +#define REG_OPTIONAL (0x1FC7D0)
>> +
>> +/*
>> + * Use the index of the register in per-cpu cpc_regs[] to check if
>> + * it's an optional one.
>> + */
>> +#define IS_OPTIONAL_CPC_REG(reg_idx) (REG_OPTIONAL & (1U << (reg_idx)))
>> +
>>   /*
>>    * Arbitrary Retries in case the remote processor is slow to respond
>>    * to PCC commands. Keeping it high enough to cover emulators where
>