mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: <vinod.koul@linux.intel.com>
Cc: <linux-arm-kernel@lists.infradead.org>, <plagnioj@jcrosoft.com>,
	<linux-kernel@vger.kernel.org>, <ludovic.desroches@atmel.com>,
	Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [PATCH 3/3] dmaengine: at_hdmac: take maxburst from slave configuration
Date: Thu, 10 May 2012 12:17:41 +0200	[thread overview]
Message-ID: <4e7b718aecc03b0c2bbde75bb6fc5464a9e38115.1336644470.git.nicolas.ferre@atmel.com> (raw)
In-Reply-To: <cover.1336644470.git.nicolas.ferre@atmel.com>

The maxburst/chunk size was taken from the private slave DMA data structure.
Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst
values.
The ctrla field is not needed anymore in the slave private structure nor the
header constants that were located in an architecture specific directory.
The at91sam9g45_devices.c file that was using this platform data is also
modified to remove this now useless data.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/at91sam9g45_devices.c   |    1 -
 arch/arm/mach-at91/include/mach/at_hdmac.h |   21 ---------------------
 drivers/dma/at_hdmac.c                     |    7 ++++---
 drivers/dma/at_hdmac_regs.h                |   21 ++++++++++++++++++++-
 4 files changed, 24 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 6b008ae..b3d2e19 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -441,7 +441,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 	atslave->dma_dev = &at_hdmac_device.dev;
 	atslave->cfg = ATC_FIFOCFG_HALFFIFO
 			| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
-	atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
 	if (mmc_id == 0)	/* MCI0 */
 		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
 			      | ATC_DST_PER(AT_DMA_ID_MCI0);
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
index 810a13e..cab0997 100644
--- a/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -27,12 +27,10 @@ struct at_dma_platform_data {
  * struct at_dma_slave - Controller-specific information about a slave
  * @dma_dev: required DMA master device
  * @cfg: Platform-specific initializer for the CFG register
- * @ctrla: Platform-specific initializer for the CTRLA register
  */
 struct at_dma_slave {
 	struct device		*dma_dev;
 	u32			cfg;
-	u32			ctrla;
 };
 
 
@@ -59,24 +57,5 @@ struct at_dma_slave {
 #define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
 #define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
 
-/* Platform-configurable bits in CTRLA */
-#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
-#define		ATC_SCSIZE_1		(0x0 << 16)
-#define		ATC_SCSIZE_4		(0x1 << 16)
-#define		ATC_SCSIZE_8		(0x2 << 16)
-#define		ATC_SCSIZE_16		(0x3 << 16)
-#define		ATC_SCSIZE_32		(0x4 << 16)
-#define		ATC_SCSIZE_64		(0x5 << 16)
-#define		ATC_SCSIZE_128		(0x6 << 16)
-#define		ATC_SCSIZE_256		(0x7 << 16)
-#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
-#define		ATC_DCSIZE_1		(0x0 << 20)
-#define		ATC_DCSIZE_4		(0x1 << 20)
-#define		ATC_DCSIZE_8		(0x2 << 20)
-#define		ATC_DCSIZE_16		(0x3 << 20)
-#define		ATC_DCSIZE_32		(0x4 << 20)
-#define		ATC_DCSIZE_64		(0x5 << 20)
-#define		ATC_DCSIZE_128		(0x6 << 20)
-#define		ATC_DCSIZE_256		(0x7 << 20)
 
 #endif /* AT_HDMAC_H */
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index b3f7cbd..07eda80 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -664,7 +664,8 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		return NULL;
 	}
 
-	ctrla = atslave->ctrla;
+	ctrla =   ATC_SCSIZE(sconfig->src_maxburst)
+		| ATC_DCSIZE(sconfig->dst_maxburst);
 	ctrlb = ATC_IEN;
 
 	switch (direction) {
@@ -792,12 +793,12 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
 		enum dma_transfer_direction direction)
 {
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
-	struct at_dma_slave	*atslave = chan->private;
 	struct dma_slave_config	*sconfig = &atchan->dma_sconfig;
 	u32			ctrla;
 
 	/* prepare common CRTLA value */
-	ctrla = atslave->ctrla
+	ctrla =   ATC_SCSIZE(sconfig->src_maxburst)
+		| ATC_DCSIZE(sconfig->dst_maxburst)
 		| ATC_DST_WIDTH(reg_width)
 		| ATC_SRC_WIDTH(reg_width)
 		| period_len >> reg_width;
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 897a8bc..8a6c8e8 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -87,7 +87,26 @@
 /* Bitfields in CTRLA */
 #define	ATC_BTSIZE_MAX		0xFFFFUL	/* Maximum Buffer Transfer Size */
 #define	ATC_BTSIZE(x)		(ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
-/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE(x)		(ATC_SCSIZE_MASK & ((x) << 16))
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE(x)		(ATC_DCSIZE_MASK & ((x) << 20))
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
 #define	ATC_SRC_WIDTH_MASK	(0x3 << 24)	/* Source Single Transfer Size */
 #define		ATC_SRC_WIDTH(x)	((x) << 24)
 #define		ATC_SRC_WIDTH_BYTE	(0x0 << 24)
-- 
1.7.10


  parent reply	other threads:[~2012-05-10 10:18 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-10 10:17 [PATCH 0/3] dmaengine: at_hdmac: " Nicolas Ferre
2012-05-10 10:17 ` [PATCH 1/3] dmaengine: at_hdmac: remove some at_dma_slave comments Nicolas Ferre
2012-05-10 10:17 ` [PATCH 2/3] dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant Nicolas Ferre
2012-05-10 10:17 ` Nicolas Ferre [this message]
2012-05-15  3:18 ` [PATCH 0/3] dmaengine: at_hdmac: slave configuration Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4e7b718aecc03b0c2bbde75bb6fc5464a9e38115.1336644470.git.nicolas.ferre@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@atmel.com \
    --cc=plagnioj@jcrosoft.com \
    --cc=vinod.koul@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®