Re: [PATCH v2 1/3] arm64: dts: qcom: sm6115: Correct cluster idle state parameters

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 10/24/26 1:10 PM, Michael McAllister wrote:
> The cluster state IDs encode unsupported CPU modes: the GDHS entries
> request CPU mode 2 and the power-collapse entries request CPU mode 4.
> The CPU power-collapse state is mode 3, as already used by the CPU
> idle-state nodes. The GDHS entries also omit the cluster affinity level,
> and cluster 1 requests cluster power collapse instead of GDHS.
> 
> The downstream Bengal power description [1] defines CPU power collapse
> as mode 3, cluster GDHS as mode 2 and cluster power collapse as mode 4,
> with cluster mode shifted by four bits. Its idle driver [2] combines
> these with bit 30 for CPU reset and bits 25:24 for the affinity level.
> For either cluster this yields 0x41000023 for GDHS and 0x41000043 for
> power collapse. The Motorola SM4250 tree uses the same power description,
> byte-for-byte, as the Xiaomi SM6115 release cited here.
> 
> Correct the shared states to match this interface. This replaces the
> board-specific overrides used by the Motorola Moto G10. Runtime testing
> is limited to that device; the downstream sources provide the common
> SM6115/SM4250 encoding evidence.

This paragraph needs to go. It's a conclusion of your LLM's local
work and doesn't make sense in the upstream git history

otherwise:

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad