mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-sound@vger.kernel.org,
	Herve Codina <herve.codina@bootlin.com>,
	Mark Brown <broonie@kernel.org>
Subject: Re: [RFC PATCH 3/3] ALSA: pcm: Convert snd_pcm_sync_ptr() to user_access_begin/user_access_end()
Date: Fri, 13 Jun 2025 14:46:46 +0200	[thread overview]
Message-ID: <4f2f8e14-22d2-44f1-82cd-5f2a3b5117b1@csgroup.eu> (raw)
In-Reply-To: <87wm9frf5x.wl-tiwai@suse.de>



Le 13/06/2025 à 14:37, Takashi Iwai a écrit :
> On Fri, 13 Jun 2025 13:03:04 +0200,
> Christophe Leroy wrote:
>>
>>
>>
>> Le 13/06/2025 à 11:29, Takashi Iwai a écrit :
>>> On Thu, 12 Jun 2025 12:51:05 +0200,
>>> Christophe Leroy wrote:
>>>>
>>>> Now that snd_pcm_sync_ptr_get_user() and snd_pcm_sync_ptr_put_user()
>>>> are converted to user_access_begin/user_access_end(),
>>>> snd_pcm_sync_ptr_get_user() is more efficient than a raw get_user()
>>>> followed by a copy_from_user(). And because copy_{to/from}_user() are
>>>> generic functions focussed on transfer of big data blocks to/from user,
>>>> snd_pcm_sync_ptr_put_user() is also more efficient for small amont of
>>>> data.
>>>>
>>>> So use snd_pcm_sync_ptr_get_user() and snd_pcm_sync_ptr_put_user() in
>>>> snd_pcm_sync_ptr() too.
>>>>
>>>> In order to have snd_pcm_mmap_status32 similar to snd_pcm_mmap_status,
>>>> replace to tsamp_{sec/nsec} and audio_tstamp_{sec/nsec} by equivalent
>>>> struct __snd_timespec.
>>>>
>>>> snd_pcm_ioctl_sync_ptr_buggy() is left as it is because the conversion
>>>> wouldn't be straigh-forward do to the workaround it provides.
>>>>
>>>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>>>
>>> Through a quick glance, all patches look almost fine, but one favor to
>>> ask: this patch contains the convert from s32/s32 pair to struct
>>> __snd_timespec.  It should be factored out to a prerequisite patch
>>> instead of burying in a big change.
>>
>> Shall I understand you prefer this series over the more simple "ALSA:
>> pcm: Convert snd_pcm_ioctl_sync_ptr_{compat/x32} to
>> user_access_begin/user_access_end()" patch ?
> 
> Err, no, sorry for ambiguity.

Then I'm lost.

I sent two alternative proposals:
A/ Single patch, simple, handling only two fonctions 
snd_pcm_ioctl_sync_ptr_{compat/x32} , without refactoring. [1]
B/ This RFC series, more elaborate, refactoring and putting user copy 
into helper macros. [2]

So the question was to be sure you prefer alternative B over alternative 
A. I guess the answer is YES as you asking me improve it.

[1] 
https://patchwork.ozlabs.org/project/linuxppc-dev/patch/8df11af98033e4cb4d9b0f16d6e9d5b69110b036.1749724057.git.christophe.leroy@csgroup.eu/
[2] 
https://patchwork.ozlabs.org/project/linuxppc-dev/list/?state=*&series=460665


> I wanted to move the replacement of tstamp_sec/nsec with struct
> __snd_timespec as a small preliminary patch from patch#3.
> That is,

Yes that's what I understood.

Thanks
Christophe


> --- a/sound/core/pcm_native.c
> +++ b/sound/core/pcm_native.c
> @@ -3103,11 +3103,9 @@ struct snd_pcm_mmap_status32 {
>   	snd_pcm_state_t state;
>   	s32 pad1;
>   	u32 hw_ptr;
> -	s32 tstamp_sec;
> -	s32 tstamp_nsec;
> +	struct __snd_timespec tstamp;
>   	snd_pcm_state_t suspended_state;
> -	s32 audio_tstamp_sec;
> -	s32 audio_tstamp_nsec;
> +	struct __snd_timespec audio_tstamp;
>   } __packed;
> etc.  By factoring this out, it becomes clear that the timespec
> compatibility is fully cared.
> 
> __snd_timespec may be defined in different ways on user-space, but in
> the kernel code, it's a single definition of s32/s32 pair.  This needs
> to be emphasized.
> 
> 
> thanks,
> 
> Takashi


  reply	other threads:[~2025-06-13 13:20 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-12 10:51 [RFC PATCH 1/3] ALSA: pcm: refactor copy from/to user in SNDRV_PCM_IOCTL_SYNC_PTR Christophe Leroy
2025-06-12 10:51 ` [RFC PATCH 2/3] ALSA: pcm: Convert SNDRV_PCM_IOCTL_SYNC_PTR to user_access_begin/user_access_end() Christophe Leroy
2025-06-12 10:51 ` [RFC PATCH 3/3] ALSA: pcm: Convert snd_pcm_sync_ptr() " Christophe Leroy
2025-06-13  9:29   ` Takashi Iwai
2025-06-13 11:03     ` Christophe Leroy
2025-06-13 12:37       ` Takashi Iwai
2025-06-13 12:46         ` Christophe Leroy [this message]
2025-06-13 14:59           ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4f2f8e14-22d2-44f1-82cd-5f2a3b5117b1@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=broonie@kernel.org \
    --cc=herve.codina@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®