Re: [PATCH] phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750

[neil.armstrong@linaro.org]

On 16/06/2025 08:25, Krzysztof Kozlowski wrote:
> Add missing DP PHY status and VCO clock configuration registers to fix
> configuring the VCO rate on SM8750.  Without proper VCO rate setting, it
> works on after-reset half of rate which is not enough for DP over USB to
> work as seen on logs:
> 
>    [drm:msm_dp_ctrl_link_train_1_2] *ERROR* max v_level reached
>    [drm:msm_dp_ctrl_link_train_1_2] *ERROR* link training #1 on phy 0 failed. ret=-11
> 
> Fixes: c4364048baf4 ("phy: qcom: qmp-combo: Add new PHY sequences for SM8750")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 8b9710a9654a..f07d097b129f 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -228,6 +228,9 @@ static const unsigned int qmp_v8_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
>   	[QPHY_COM_CMN_STATUS]		= QSERDES_V8_COM_CMN_STATUS,
>   	[QPHY_COM_BIAS_EN_CLKBUFLR_EN]	= QSERDES_V8_COM_BIAS_EN_CLKBUFLR_EN,
>   
> +	[QPHY_DP_PHY_STATUS]		= QSERDES_V6_DP_PHY_STATUS,
> +	[QPHY_DP_PHY_VCO_DIV]		= QSERDES_V6_DP_PHY_VCO_DIV,
> +
>   	[QPHY_TX_TX_POL_INV]		= QSERDES_V8_TX_TX_POL_INV,
>   	[QPHY_TX_TX_DRV_LVL]		= QSERDES_V8_TX_TX_DRV_LVL,
>   	[QPHY_TX_TX_EMP_POST1_LVL]	= QSERDES_V8_TX_TX_EMP_POST1_LVL,

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>