Re: [EXTERNAL] Re: [PATCHv4 4/6] arm64: dts: ti: Add support for AM62D2-EVM

[Paresh Bhagat <p-bhagat@ti.com>]

Hi Andrew,

On 24/06/25 13:51, Andrew Lunn wrote:
> > +&cpsw_port1 { > + status = "okay"; > + phy-mode = "rgmii-rxid"; > + 
> phy-handle = <&cpsw3g_phy0>; Does the PCB have extra long RX clock 
> lines? More likely, this should be 'rgmii-id', and you should delete 
> the ti,rx-internal-delay
> ZjQcmQRYFpfptBannerStart
> This message was sent from outside of Texas Instruments.
> Do not click links or open attachments unless you recognize the source 
> of this email and know the content is safe.
> Report Suspicious
> <https://us-phishalarm-ewt.proofpoint.com/EWT/v1/G3vK!uXdgV9dududxisXOFnkjP9PiILYQjt7Q3CKXWbpFj_azwskWiOd4wL5JX89-p35UM2TbsxxlxwNFQJTlPm4wjyyHNTY$> 
>
> ZjQcmQRYFpfptBannerEnd
> > +&cpsw_port1 {
> > +	status = "okay";
> > +	phy-mode = "rgmii-rxid";
> > +	phy-handle = <&cpsw3g_phy0>;
>
> Does the PCB have extra long RX clock lines?
>
> More likely, this should be 'rgmii-id', and you should delete the
> ti,rx-internal-delay in the PHY node, allowing it to insert the 2ns
> delay in the normal way.
>
> 	Andrew

I assume you are referring to the changes in a patch here
https://lore.kernel.org/r/cover.1750756583.git.matthias.schiffer@ew.tq-group.com/

Will fix this in next version. Thanks for the review.