From: Zongmin Zhou <min_halo@163.com>
To: Shuah Khan <skhan@linuxfoundation.org>,
Greg KH <gregkh@linuxfoundation.org>
Cc: shuah@kernel.org, valentina.manea.m@gmail.com, i@zenithal.me,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
zhouzongmin@kylinos.cn
Subject: Re: [PATCH v2] usbip: convert to use faux_device
Date: Thu, 3 Jul 2025 14:04:52 +0800 [thread overview]
Message-ID: <4fc877f0-b55b-4fa3-8df4-2de4ba1ac51b@163.com> (raw)
In-Reply-To: <1a13cf53-ffed-4521-917e-9c2856a5e348@linuxfoundation.org>
[-- Attachment #1: Type: text/plain, Size: 12665 bytes --]
On 2025/7/3 07:54, Shuah Khan wrote:
> On 7/1/25 20:12, Zongmin Zhou wrote:
>>
>> On 2025/7/2 06:56, Shuah Khan wrote:
>>> On 6/23/25 21:21, Zongmin Zhou wrote:
>>>>
>>>> On 2025/6/21 01:26, Shuah Khan wrote:
>>>>> On 6/20/25 03:27, Greg KH wrote:
>>>>>> On Fri, Jun 20, 2025 at 05:19:33PM +0800, Zongmin Zhou wrote:
>>>>>>>
>>>>>>> On 2025/6/20 12:29, Greg KH wrote:
>>>>>>>> On Fri, Jun 20, 2025 at 10:16:16AM +0800, Zongmin Zhou wrote:
>>>>>>>>> On 2025/6/19 19:01, Greg KH wrote:
>>>>>>>>>> On Wed, Jun 04, 2025 at 02:54:10PM +0800, Zongmin Zhou wrote:
>>>>>>>>>>> From: Zongmin Zhou <zhouzongmin@kylinos.cn>
>>>>>>>>>>>
>>>>>>>>>>> The vhci driver does not need to create a platform device,
>>>>>>>>>>> it only did so because it was simple to do that in order to
>>>>>>>>>>> get a place in sysfs to hang some device-specific attributes.
>>>>>>>>>>> Now the faux device interface is more appropriate,change it
>>>>>>>>>>> over to use the faux bus instead.
>>>>>>>>>>>
>>>>>>>>>>> Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
>>>>>>>>>>> ---
>>>>>>>>>>> Changes in v2:
>>>>>>>>>>> - don't change faux create api,just call probe on
>>>>>>>>>>> vhci_hcd_init.
>>>>>>>>>>>
>>>>>>>>>>> drivers/usb/usbip/vhci.h | 4 +-
>>>>>>>>>>> drivers/usb/usbip/vhci_hcd.c | 86
>>>>>>>>>>> +++++++++++-----------------
>>>>>>>>>>> drivers/usb/usbip/vhci_sysfs.c | 68
>>>>>>>>>>> +++++++++++-----------
>>>>>>>>>>> tools/usb/usbip/libsrc/vhci_driver.h | 2 +-
>>>>>>>>>>> 4 files changed, 72 insertions(+), 88 deletions(-)
>>>>>>>>>> I get the following build errors from this patch:
>>>>>>>>>>
>>>>>>>>>> drivers/usb/usbip/vhci_hcd.c:1462:12: error:
>>>>>>>>>> ‘vhci_hcd_resume’ defined but not used [-Werror=unused-function]
>>>>>>>>>> 1462 | static int vhci_hcd_resume(struct faux_device *fdev)
>>>>>>>>>> | ^~~~~~~~~~~~~~~
>>>>>>>>>> drivers/usb/usbip/vhci_hcd.c:1418:12: error:
>>>>>>>>>> ‘vhci_hcd_suspend’ defined but not used
>>>>>>>>>> [-Werror=unused-function]
>>>>>>>>>> 1418 | static int vhci_hcd_suspend(struct faux_device
>>>>>>>>>> *fdev, pm_message_t state)
>>>>>>>>>> | ^~~~~~~~~~~~~~~~
>>>>>>>>>> cc1: all warnings being treated as errors
>>>>>>>>>>
>>>>>>>>>> Are you sure you tested this?
>>>>>>>>> I apologize for not enabling -Werror, which resulted in
>>>>>>>>> missing this error
>>>>>>>>> warning.
>>>>>>>>> I have tested usbip feature use the new patch,but not test system
>>>>>>>>> suspend/resume.
>>>>>>>>> The faux bus type don't add pm function,and vhci-hcd driver
>>>>>>>>> can't register
>>>>>>>>> it.
>>>>>>>>> Maybe have to add suspend/resume for it.like below:
>>>>>>>>> static const struct bus_type faux_bus_type = {
>>>>>>>>> .name = "faux",
>>>>>>>>> .match = faux_match,
>>>>>>>>> .probe = faux_probe,
>>>>>>>>> .remove = faux_remove,
>>>>>>>>> .resume = faux_resume,
>>>>>>>>> .suspend = faux_suspend,
>>>>>>>>> };
>>>>>>>>>
>>>>>>>>> Is that right?
>>>>>>>>> Your expertise would be greatly valued.
>>>>>>>> As this is not real hardware, why do you need the suspend/resume
>>>>>>>> callbacks at all? What is happening here that requires them?
>>>>>>> @greg,
>>>>>>> The vhci_hcd_suspend/vhci_hcd_resume interfaces are not designed
>>>>>>> for this
>>>>>>> faux device, but rather to
>>>>>>> manipulate the HCD_FLAG_HW_ACCESSIBLE bit in the hcd flags
>>>>>>> associated with
>>>>>>> the faux device.
>>>>>>> For example:
>>>>>>> During system standby: clear_bit(HCD_FLAG_HW_ACCESSIBLE,
>>>>>>> &hcd->flags)
>>>>>>> During system wakeup: set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)
>>>>>>>
>>>>>>> Previously, these two functions were registered through
>>>>>>> platform_driver,
>>>>>>> but faux bus does not have the relevant interface, so they were
>>>>>>> not called,
>>>>>>> resulting in this compilation warning error.
>>>>>>>
>>>>>>> This raises the question: Should the faux bus implement PM-related
>>>>>>> interface?
>>>>>>> I'm uncertain whether these functions are essential for the
>>>>>>> vhci-hcd driver
>>>>>>> or if they can be safely removed.
>>>>>>>
>>>>>>> However, during system standby/wakeup tests with remote USB
>>>>>>> devices bound to
>>>>>>> the vhci-hcd driver,
>>>>>>> I observed consistent failure scenarios across both the original
>>>>>>> platform
>>>>>>> bus and faux bus patch implementations.
>>>>>
>>>>> suspend and resume hooks have been in the code from beginning
>>>>> in the CONFIG_PM path. The original authors are skeptical about
>>>>> what should happen during suspend"
>>>>>
>>>>> /* what should happen for USB/IP under suspend/resume? */
>>>>> suspend hook checks for active connections and sends EBBUSY
>>>>> back to pm core.
>>>>>
>>>>> Active connection means any of the ports are in
>>>>> USB_PORT_STAT_CONNECTION
>>>>> state. So as long as there are active connections between vhci client
>>>>> and the host, suspend won't work. So we really don't know what
>>>>> happens
>>>>> to the active connections if there are no suspend/resume hooks.
>>>>>
>>>>> If there are no active connections, then it will clear the
>>>>> HCD_FLAG_HW_ACCESSIBLE
>>>>> bit and returns to pm core to continue with suspend.
>>>>>
>>>>> resume sets the HCD_FLAG_HW_ACCESSIBLE flag to indicate hardware
>>>>> is accessible
>>>>> and initiates port status poll.
>>>>>
>>>>> - suspend hook prevents suspend
>>>>>
>>>>> With faux device since there is no suspend and resume hook, I
>>>>> would expect
>>>>> these hooks are not a factor in suspend and resume.
>>>>>
>>>>> vhci_hcd is a special case virtual driver as it is a proxy for
>>>>> controlling
>>>>> hardware on the host.
>>>>>
>>>>> Zongmin,
>>>>>
>>>>> Do suspend/resume work when vhci_hcd is not loaded?
>>>>> What happens when when system suspends and resumes with faux device?
>>>>> Can you send me dmesg logs and pm logs?
>>>>>
>>>> Hi Greg,shuah
>>>>
>>>> Yes, system with vhci_hcd unload or just load vhci_hcd driver
>>>> without usbip devices bound to vhci_hcd,system suspend/resume
>>>> worked well.
>>>> Some logs for you.
>>>
>>> Sorry for the delay. I was at a conference last week.
>>> Thank you for sending these logs.
>>>
>>>> 1.system with vhci_hcd driver load,but don't bound any usbip
>>>> devices to vhci_hcd,suspend/resume worked well.
>>>> see dmesg-faux bus-load.log
>>>
>>>
>>>>
>>>> 2.usbip device bound to vhci_hcd,and do system suspend
>>>> action,suspend/resume worked failed.
>>>> I observed two distinct failure scenario:
>>>> Scenario 1: System failed to enter suspend state,and will auto resume;
>>>
>>>
>>>> the log for use platform bus:
>>>> dmesg-platform bus-device bound-auto resume.log
>>>
>>> This is clear from the suspend hook in the vhci_hcd.
>>> When it returns EBUSY, suspend will fail and move to
>>> auto resume.
>>>
>>>> the log for use faux bus:
>>>> dmesg-faux bus-device bound-auto resume.log
>>>
>>> It is good that the behavior is same with faux bus even though
>>> suspend hook isn't called. I will take a look at the log.
>>>
>>>>
>>>> Scenario 2: System resume failed with black screen freeze,a forced
>>>> restart of the machine is require.
>>>> the log for use platform bus:
>>>> dmesg-platform bus-device bound-black screen.log
>>>> the log for use faux bus:
>>>> dmesg-faux bus-device bound-black screen.log
>>>
>>> That is bad. When does this happen? Is there a difference in
>>> configuration?
>>>
>> No, there's no difference. The same code is used for two different
>> failure scenarios.
>> I just tested many times. These two different situations occur
>> probabilistically.
>> But they both happened only when the USBIP device is bound to the
>> vhci_hcd driver.
>>> The behavior same for platform bus and faux bus. Sounds like
>>> an existing problem that needs to be debugged separately.
>>>
>>> I will take a look at all these logs and get back to you in
>>> a day or two.
>>>
>
> I looked at the logs and here is what I found:
>
> Scenario 1:
> dmesg-faux bus-device bound-auto resume.log
> dmesg-platform bus-device bound-auto resume.log
>
> In this case suspend bailed out way before driver suspend
> when vhci_hcd is using platform and faux bus.
>
> Freezing remaining freezable tasks failed after 20.006 seconds (0
> tasks refusing to freeze, wq_busy=1)
> Restarting kernel threads ... done
> OOM killer enabled.
> Restarting tasks ... done.
> random: crng reseeded on system resumption
> PM: suspend exit
>
> Auto-resume of the user-space worked. Scenario 1 isn't really
> interesting.
>
> Scenario 2:
> dmesg-faux bus-device bound-black screen.log
> dmesg-platform bus-device bound-black screen.log
>
> Even though the result is the same in seeing blank screen, how
> we get there is different.
>
> =================
> faux-bus device:
> =================
> - suspend worked - looks like
> usb 4-1: PM: calling usb_dev_suspend @ 6054, parent: usb4
> usb 4-1: PM: usb_dev_suspend returned 0 after 13675 usecs
> usb usb4: PM: calling usb_dev_suspend @ 6055, parent: vhci_hcd.0
> usb usb4: PM: usb_dev_suspend returned 0 after 9 usecs
>
> vhci_hcd suspend isn't in play here. usb_dev_suspend() returns.
> See below
>
> usb 4-1: PM: usb_dev_suspend returned message.
>
> -------------------------------------------------------------
>
> - resume started (assuming it has been initiated by user)
>
> [ 650.027491][ T6056] pci 0000:00:01.0: PM: pci_pm_suspend_noirq
> returned 0 after 304 usecs
>
> See see timestamp difference between the last suspend message and the
> first resume message.
> [ 674.000257][ T39] pci 0000:00:00.0: PM: calling
> pci_pm_resume_noirq @ 39, parent: pci0000:00
>
> usb 4-1 usb_dev_resume never returns.
>
> [ 674.071125][ T6117] usb usb4: PM: usb_dev_resume returned 0 after
> 21110 usecs
> [ 674.113991][ T6126] usb 4-1: PM: calling usb_dev_resume @ 6126,
> parent: usb4
>
> -------------------------------------------------------------
>
> =====================
> platform bus device
> =====================
>
> - suspend was aborted because vhci_hcd suspend routine returned error
>
> [ 297.854621][ T9402] usb 4-1: PM: calling usb_dev_suspend @ 9402,
> parent: usb4
> [ 297.868524][ T9402] usb 4-1: PM: usb_dev_suspend returned 0 after
> 13214 usecs
> [ 297.869994][ T9403] usb usb4: PM: calling usb_dev_suspend @ 9403,
> parent: vhci_hcd.0
> [ 297.871959][ T9403] usb usb4: PM: usb_dev_suspend returned 0 after
> 30 usecs
> [ 297.873644][ T9394] vhci_hcd vhci_hcd.0: PM: calling
> platform_pm_suspend @ 9394, parent: platform
> [ 297.874738][ T9394] vhci_hcd vhci_hcd.0: We have 1 active
> connection. Do not suspend.
> [ 297.875369][ T9394] vhci_hcd vhci_hcd.0: PM: dpm_run_callback():
> platform_pm_suspend returns -16
> [ 297.876078][ T9394] vhci_hcd vhci_hcd.0: PM: platform_pm_suspend
> returned -16 after 1341 usecs
> [ 297.876774][ T9394] vhci_hcd vhci_hcd.0: PM: failed to suspend:
> error -16
>
> - the following triggers resume
> [ 297.877321][ T9394] PM: Some devices failed to suspend, or early
> wake event detected
>
> [ 297.881065][ T9403] usb usb3: PM: usb_dev_resume returned 0 after
> 19 usecs
> [ 297.904551][ T9408] usb usb4: PM: usb_dev_resume returned 0 after
> 22911 usecs
> [ 297.905148][ T9418] usb 4-1: PM: calling usb_dev_resume @ 9418,
> parent: usb4
>
> usb 4-1 usb_dev_resume never returns.
>
> Note - In both cases, usb_dev_resume doesn't return. When it is called
> is the
> difference.
>
> I don't think suspend/resume works when devices are bound. Suspend
> exits and
> starts resume which seems to fail because it doesn't handle the
> virtual usb
> device resume. There is a missing piece here.
>
> When vhci_hcd imports a device and acts as a proxy between the virtual
> mass
> storage device (e.g in this case) - it appears suspend and resume are
> handled as if it is a usb device. Maybe this is incorrect?
>
> usb_dev_suspend() works and usb_dev_resume() on these virtual usb
> devices?
> Do we need to handle this in usb_dev_resume()?
>
> Talking out loud - I have to do some looking into.
>
Re:
Yes, your analysis is completely correct.
In fact, I've experimented with adding PM hooks to the faux bus,
and found that faux bus devices then behave identically to platform bus
devices during suspend/resume.
See the attachment.
This is likely a historical legacy issue.
Regarding this matter, is there anything else you'd like me to assist with?
> thanks,
> -- Shuah
>
>
>
[-- Attachment #2: dmesg-faux bus-device bound-with pm hook-black screen.log --]
[-- Type: text/x-log, Size: 178589 bytes --]
[ 0.000000] Linux version 6.15.0-rc5+ (root@standardpc) (gcc (Ubuntu 9.3.0-10kylin2) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #20 SMP PREEMPT_DYNAMIC Thu Jul 3 09:13:18 CST 2025
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.15.0-rc5+ root=UUID=3516f70c-4dd9-4b0f-bac4-c41778d09bbb ro quiet splash console=ttyS0 loglevel=7 initcall_debug no_console_suspend ignore_loglevel crashkernel=512M-:192M audit=0 security=kysec
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffdf000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] printk: debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 963931164954 cycles
[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000005] tsc: Detected 2803.200 MHz processor
[ 0.000630] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000632] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000636] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000677] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000680] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000728] last_pfn = 0xbffdf max_arch_pfn = 0x400000000
[ 0.007090] found SMP MP-table at [mem 0x000f5a40-0x000f5a4f]
[ 0.007104] Using GB pages for direct mapping
[ 0.007235] RAMDISK: [mem 0x2f169000-0x338abfff]
[ 0.007238] ACPI: Early table checksum verification disabled
[ 0.007242] ACPI: RSDP 0x00000000000F5A00 000014 (v00 BOCHS )
[ 0.007246] ACPI: RSDT 0x00000000BFFE1639 000030 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007251] ACPI: FACP 0x00000000BFFE150D 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007256] ACPI: DSDT 0x00000000BFFDFD80 00178D (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007259] ACPI: FACS 0x00000000BFFDFD40 000040
[ 0.007261] ACPI: APIC 0x00000000BFFE1581 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007264] ACPI: WAET 0x00000000BFFE1611 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007266] ACPI: Reserving FACP table memory at [mem 0xbffe150d-0xbffe1580]
[ 0.007267] ACPI: Reserving DSDT table memory at [mem 0xbffdfd80-0xbffe150c]
[ 0.007267] ACPI: Reserving FACS table memory at [mem 0xbffdfd40-0xbffdfd7f]
[ 0.007268] ACPI: Reserving APIC table memory at [mem 0xbffe1581-0xbffe1610]
[ 0.007268] ACPI: Reserving WAET table memory at [mem 0xbffe1611-0xbffe1638]
[ 0.007491] No NUMA configuration found
[ 0.007491] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.007497] NODE_DATA(0) allocated [mem 0x23ffd59c0-0x23fffffff]
[ 0.007627] crashkernel reserved: 0x00000000b3000000 - 0x00000000bf000000 (192 MB)
[ 0.007640] Zone ranges:
[ 0.007640] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007642] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007643] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.007644] Device empty
[ 0.007644] Movable zone start for each node
[ 0.007646] Early memory node ranges
[ 0.007646] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007647] node 0: [mem 0x0000000000100000-0x00000000bffdefff]
[ 0.007648] node 0: [mem 0x0000000100000000-0x000000023fffffff]
[ 0.007649] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[ 0.007654] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007671] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.018253] On node 0, zone Normal: 33 pages in unavailable ranges
[ 0.018556] ACPI: PM-Timer IO Port: 0x608
[ 0.018572] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.018605] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.018607] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.018609] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.018610] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.018611] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.018611] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.018615] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.018617] TSC deadline timer available
[ 0.018620] CPU topo: Max. logical packages: 4
[ 0.018621] CPU topo: Max. logical dies: 4
[ 0.018621] CPU topo: Max. dies per package: 1
[ 0.018624] CPU topo: Max. threads per core: 1
[ 0.018624] CPU topo: Num. cores per package: 1
[ 0.018625] CPU topo: Num. threads per package: 1
[ 0.018625] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.018643] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.018656] kvm-guest: KVM setup pv remote TLB flush
[ 0.018661] kvm-guest: setup PV sched yield
[ 0.018666] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.018667] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.018668] PM: hibernation: Registered nosave memory: [mem 0xbffdf000-0xffffffff]
[ 0.018669] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.018670] Booting paravirtualized kernel on KVM
[ 0.018672] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.018676] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018892] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[ 0.018896] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[ 0.018898] pcpu-alloc: [0] 0 1 2 3
[ 0.018926] kvm-guest: PV spinlocks enabled
[ 0.018927] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.018930] Kernel command line: BOOT_IMAGE=/vmlinuz-6.15.0-rc5+ root=UUID=3516f70c-4dd9-4b0f-bac4-c41778d09bbb ro quiet splash console=ttyS0 loglevel=7 initcall_debug no_console_suspend ignore_loglevel crashkernel=512M-:192M audit=0 security=kysec
[ 0.019038] audit: disabled (until reboot)
[ 0.019048] Unknown kernel command line parameters "splash BOOT_IMAGE=/vmlinuz-6.15.0-rc5+", will be passed to user space.
[ 0.019060] random: crng init done
[ 0.019061] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
[ 0.019693] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.020007] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.020078] software IO TLB: area num 4.
[ 0.193607] Fallback order for Node 0: 0
[ 0.193612] Built 1 zonelists, mobility grouping on. Total pages: 2097021
[ 0.193614] Policy zone: Normal
[ 0.193616] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.205202] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.212705] ftrace: allocating 54136 entries in 212 pages
[ 0.212708] ftrace: allocated 212 pages with 4 groups
[ 0.213503] Dynamic Preempt: voluntary
[ 0.213552] rcu: Preemptible hierarchical RCU implementation.
[ 0.213552] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.213553] Trampoline variant of Tasks RCU enabled.
[ 0.213554] Rude variant of Tasks RCU enabled.
[ 0.213554] Tracing variant of Tasks RCU enabled.
[ 0.213554] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.213555] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.213560] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.213561] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.213562] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.216320] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.216521] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.216571] calling con_init+0x0/0x270 @ 0
[ 0.216583] Console: colour dummy device 80x25
[ 0.216584] initcall con_init+0x0/0x270 returned 0 after 0 usecs
[ 0.216586] calling hvc_console_init+0x0/0x30 @ 0
[ 0.216588] initcall hvc_console_init+0x0/0x30 returned 0 after 0 usecs
[ 0.216589] calling xen_cons_init+0x0/0x60 @ 0
[ 0.216592] initcall xen_cons_init+0x0/0x60 returned 0 after 0 usecs
[ 0.216593] calling univ8250_console_init+0x0/0x40 @ 0
[ 0.216640] printk: legacy console [ttyS0] enabled
[ 0.276939] initcall univ8250_console_init+0x0/0x40 returned 0 after 0 usecs
[ 0.277447] calling kgdboc_earlycon_late_init+0x0/0x40 @ 0
[ 0.277855] initcall kgdboc_earlycon_late_init+0x0/0x40 returned 0 after 0 usecs
[ 0.278398] ACPI: Core revision 20240827
[ 0.278733] APIC: Switch to symmetric I/O mode setup
[ 0.279321] x2apic enabled
[ 0.279786] APIC: Switched APIC routing to: physical x2apic
[ 0.280190] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask()
[ 0.280673] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself()
[ 0.281228] kvm-guest: setup PV IPIs
[ 0.282108] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28680fa287f, max_idle_ns: 440795281151 ns
[ 0.282850] Calibrating delay loop (skipped) preset value.. 5606.40 BogoMIPS (lpj=11212800)
[ 0.283619] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.284112] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.284461] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.284846] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.285371] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
[ 0.285782] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.286109] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[ 0.286551] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.286845] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.286845] GDS: Unknown: Dependent on hypervisor status
[ 0.286845] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.286845] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.286845] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.286845] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.286845] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.286845] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.286845] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.286845] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.286845] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.286845] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.286845] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.286845] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.286845] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[ 0.286845] Freeing SMP alternatives memory: 44K
[ 0.286845] pid_max: default: 32768 minimum: 301
[ 0.286845] LSM: initializing lsm=capability,ima,evm
[ 0.286845] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.286845] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.286845] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[ 0.286845] calling init_hw_perf_events+0x0/0x720 @ 1
[ 0.286845] Performance Events: Icelake events, full-width counters, Intel PMU driver.
[ 0.286845] ... version: 2
[ 0.286845] ... bit width: 48
[ 0.286845] ... generic registers: 8
[ 0.286845] ... value mask: 0000ffffffffffff
[ 0.286845] ... max period: 00007fffffffffff
[ 0.286845] ... fixed-purpose events: 3
[ 0.286845] ... event mask: 00000007000000ff
[ 0.286845] initcall init_hw_perf_events+0x0/0x720 returned 0 after 0 usecs
[ 0.286845] calling mc_debug_enable+0x0/0xa0 @ 1
[ 0.286850] initcall mc_debug_enable+0x0/0xa0 returned 0 after 0 usecs
[ 0.287241] calling do_init_real_mode+0x0/0x20 @ 1
[ 0.287553] initcall do_init_real_mode+0x0/0x20 returned 0 after 0 usecs
[ 0.287922] calling init_sigframe_size+0x0/0x50 @ 1
[ 0.288202] signal: max sigframe size: 3632
[ 0.288454] initcall init_sigframe_size+0x0/0x50 returned 0 after 0 usecs
[ 0.288881] calling trace_init_perf_perm_irq_work_exit+0x0/0x20 @ 1
[ 0.289290] initcall trace_init_perf_perm_irq_work_exit+0x0/0x20 returned 0 after 0 usecs
[ 0.289802] calling cache_ap_register+0x0/0x70 @ 1
[ 0.290122] initcall cache_ap_register+0x0/0x70 returned 0 after 0 usecs
[ 0.290534] calling bp_init_aperfmperf+0x0/0x2c0 @ 1
[ 0.290848] initcall bp_init_aperfmperf+0x0/0x2c0 returned 0 after 0 usecs
[ 0.291278] calling save_builtin_microcode+0x0/0xe0 @ 1
[ 0.291617] initcall save_builtin_microcode+0x0/0xe0 returned 0 after 0 usecs
[ 0.292056] calling save_microcode_in_initrd+0x0/0x110 @ 1
[ 0.292410] initcall save_microcode_in_initrd+0x0/0x110 returned 0 after 0 usecs
[ 0.292867] calling register_nmi_cpu_backtrace_handler+0x0/0x30 @ 1
[ 0.293265] initcall register_nmi_cpu_backtrace_handler+0x0/0x30 returned 0 after 0 usecs
[ 0.293783] calling numachip_system_init+0x0/0x80 @ 1
[ 0.294118] initcall numachip_system_init+0x0/0x80 returned 0 after 0 usecs
[ 0.294549] calling kvm_setup_vsyscall_timeinfo+0x0/0x190 @ 1
[ 0.294848] initcall kvm_setup_vsyscall_timeinfo+0x0/0x190 returned 0 after 0 usecs
[ 0.295256] calling spawn_ksoftirqd+0x0/0x60 @ 1
[ 0.295549] initcall spawn_ksoftirqd+0x0/0x60 returned 0 after 0 usecs
[ 0.295937] calling init_signal_sysctls+0x0/0x40 @ 1
[ 0.296269] initcall init_signal_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.297122] calling init_umh_sysctls+0x0/0x40 @ 1
[ 0.297440] initcall init_umh_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.297860] calling kthreads_init+0x0/0x40 @ 1
[ 0.298145] initcall kthreads_init+0x0/0x40 returned 0 after 0 usecs
[ 0.298502] calling migration_init+0x0/0x40 @ 1
[ 0.298774] initcall migration_init+0x0/0x40 returned 0 after 0 usecs
[ 0.298849] calling printk_set_kthreads_ready+0x0/0x50 @ 1
[ 0.299174] initcall printk_set_kthreads_ready+0x0/0x50 returned 0 after 0 usecs
[ 0.299625] calling srcu_bootup_announce+0x0/0x90 @ 1
[ 0.299967] rcu: Hierarchical SRCU implementation.
[ 0.300277] rcu: Max phase no-delay instances is 1000.
[ 0.300612] initcall srcu_bootup_announce+0x0/0x90 returned 0 after 0 usecs
[ 0.301044] calling rcu_spawn_gp_kthread+0x0/0x260 @ 1
[ 0.302859] initcall rcu_spawn_gp_kthread+0x0/0x260 returned 0 after 4000 usecs
[ 0.303315] calling check_cpu_stall_init+0x0/0x30 @ 1
[ 0.303646] initcall check_cpu_stall_init+0x0/0x30 returned 0 after 0 usecs
[ 0.304077] calling rcu_sysrq_init+0x0/0x40 @ 1
[ 0.304385] initcall rcu_sysrq_init+0x0/0x40 returned 0 after 0 usecs
[ 0.304792] calling trace_init_flags_sys_enter+0x0/0x20 @ 1
[ 0.305156] initcall trace_init_flags_sys_enter+0x0/0x20 returned 0 after 0 usecs
[ 0.305620] calling trace_init_flags_sys_exit+0x0/0x20 @ 1
[ 0.305974] initcall trace_init_flags_sys_exit+0x0/0x20 returned 0 after 0 usecs
[ 0.306444] calling tmigr_init+0x0/0x190 @ 1
[ 0.306731] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.306852] initcall tmigr_init+0x0/0x190 returned 0 after 4000 usecs
[ 0.307298] calling cpu_stop_init+0x0/0xa0 @ 1
[ 0.310857] initcall cpu_stop_init+0x0/0xa0 returned 0 after 4000 usecs
[ 0.311278] calling init_kprobes+0x0/0x1e0 @ 1
[ 0.311663] initcall init_kprobes+0x0/0x1e0 returned 0 after 0 usecs
[ 0.312063] calling init_trace_printk+0x0/0x20 @ 1
[ 0.312379] initcall init_trace_printk+0x0/0x20 returned 0 after 0 usecs
[ 0.312744] calling event_trace_enable_again+0x0/0x60 @ 1
[ 0.313100] initcall event_trace_enable_again+0x0/0x60 returned 0 after 0 usecs
[ 0.313552] calling irq_work_init_threads+0x0/0x10 @ 1
[ 0.313889] initcall irq_work_init_threads+0x0/0x10 returned 0 after 0 usecs
[ 0.314324] calling static_call_init+0x0/0xe0 @ 1
[ 0.314635] initcall static_call_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.314849] calling jump_label_init_module+0x0/0x20 @ 1
[ 0.315188] initcall jump_label_init_module+0x0/0x20 returned 0 after 0 usecs
[ 0.315622] calling init_zero_pfn+0x0/0x50 @ 1
[ 0.315914] initcall init_zero_pfn+0x0/0x50 returned 0 after 0 usecs
[ 0.316329] calling init_fs_inode_sysctls+0x0/0x40 @ 1
[ 0.316713] initcall init_fs_inode_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.317150] calling init_fs_locks_sysctls+0x0/0x40 @ 1
[ 0.317452] initcall init_fs_locks_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.317834] calling init_fs_sysctls+0x0/0x40 @ 1
[ 0.318141] initcall init_fs_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.318549] calling init_security_keys_sysctls+0x0/0x40 @ 1
[ 0.318851] initcall init_security_keys_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.319298] calling dynamic_debug_init+0x0/0x2b0 @ 1
[ 0.319635] initcall dynamic_debug_init+0x0/0x2b0 returned 0 after 0 usecs
[ 0.320045] calling unpopulated_init+0x0/0x70 @ 1
[ 0.320355] initcall unpopulated_init+0x0/0x70 returned -19 after 0 usecs
[ 0.320811] calling efi_memreserve_root_init+0x0/0x40 @ 1
[ 0.321183] initcall efi_memreserve_root_init+0x0/0x40 returned 0 after 0 usecs
[ 0.321659] calling efi_earlycon_remap_fb+0x0/0x70 @ 1
[ 0.321996] initcall efi_earlycon_remap_fb+0x0/0x70 returned 0 after 0 usecs
[ 0.322449] calling idle_inject_init+0x0/0x20 @ 1
[ 0.322813] initcall idle_inject_init+0x0/0x20 returned 0 after 0 usecs
[ 0.322916] smp: Bringing up secondary CPUs ...
[ 0.323308] smpboot: x86: Booting SMP configuration:
[ 0.323630] .... node #0, CPUs: #1 #2 #3
[ 0.334944] smp: Brought up 1 node, 4 CPUs
[ 0.335791] smpboot: Total of 4 processors activated (22425.60 BogoMIPS)
[ 0.336468] Memory: 7856812K/8388084K available (17883K kernel code, 5975K rwdata, 7752K rodata, 4692K init, 5544K bss, 524120K reserved, 0K cma-reserved)
[ 0.336468] devtmpfs: initialized
[ 0.336468] x86/mm: Memory block size: 128MB
[ 0.339086] calling setup_split_lock_delayed_work+0x0/0xa0 @ 1
[ 0.339473] initcall setup_split_lock_delayed_work+0x0/0xa0 returned 0 after 0 usecs
[ 0.339948] calling bpf_jit_charge_init+0x0/0x50 @ 1
[ 0.340275] initcall bpf_jit_charge_init+0x0/0x50 returned 0 after 0 usecs
[ 0.340704] calling ipc_ns_init+0x0/0x50 @ 1
[ 0.340990] initcall ipc_ns_init+0x0/0x50 returned 0 after 0 usecs
[ 0.341375] calling init_mmap_min_addr+0x0/0x50 @ 1
[ 0.341703] initcall init_mmap_min_addr+0x0/0x50 returned 0 after 0 usecs
[ 0.342127] calling pci_realloc_setup_params+0x0/0x90 @ 1
[ 0.342477] initcall pci_realloc_setup_params+0x0/0x90 returned 0 after 0 usecs
[ 0.342848] calling inet_frag_wq_init+0x0/0x50 @ 1
[ 0.343196] initcall inet_frag_wq_init+0x0/0x50 returned 0 after 0 usecs
[ 0.343308] calling xen_pvh_gnttab_setup+0x0/0x50 @ 1
[ 0.343653] initcall xen_pvh_gnttab_setup+0x0/0x50 returned -19 after 0 usecs
[ 0.344094] calling e820__register_nvs_regions+0x0/0x70 @ 1
[ 0.344456] initcall e820__register_nvs_regions+0x0/0x70 returned 0 after 0 usecs
[ 0.344915] calling cpufreq_register_tsc_scaling+0x0/0x40 @ 1
[ 0.345294] initcall cpufreq_register_tsc_scaling+0x0/0x40 returned 0 after 0 usecs
[ 0.345732] calling reboot_init+0x0/0x60 @ 1
[ 0.345988] initcall reboot_init+0x0/0x60 returned 0 after 0 usecs
[ 0.346330] calling init_lapic_sysfs+0x0/0x40 @ 1
[ 0.346848] initcall init_lapic_sysfs+0x0/0x40 returned 0 after 0 usecs
[ 0.347211] calling alloc_frozen_cpus+0x0/0x30 @ 1
[ 0.347492] initcall alloc_frozen_cpus+0x0/0x30 returned 0 after 0 usecs
[ 0.347857] calling cpu_hotplug_pm_sync_init+0x0/0x30 @ 1
[ 0.348164] initcall cpu_hotplug_pm_sync_init+0x0/0x30 returned 0 after 0 usecs
[ 0.348571] calling wq_sysfs_init+0x0/0x30 @ 1
[ 0.348848] initcall wq_sysfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.349195] calling ksysfs_init+0x0/0xd0 @ 1
[ 0.349461] initcall ksysfs_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.349881] calling schedutil_gov_init+0x0/0x20 @ 1
[ 0.350308] initcall schedutil_gov_init+0x0/0x20 returned 0 after 0 usecs
[ 0.350744] calling pm_init+0x0/0x90 @ 1
[ 0.350863] initcall pm_init+0x0/0x90 returned 0 after 0 usecs
[ 0.351190] calling pm_disk_init+0x0/0x30 @ 1
[ 0.351468] initcall pm_disk_init+0x0/0x30 returned 0 after 0 usecs
[ 0.351877] calling swsusp_header_init+0x0/0x40 @ 1
[ 0.352197] initcall swsusp_header_init+0x0/0x40 returned 0 after 0 usecs
[ 0.352617] calling rcu_set_runtime_mode+0x0/0x30 @ 1
[ 0.352981] initcall rcu_set_runtime_mode+0x0/0x30 returned 0 after 0 usecs
[ 0.353421] calling rcu_init_tasks_generic+0x0/0x100 @ 1
[ 0.353788] initcall rcu_init_tasks_generic+0x0/0x100 returned 0 after 0 usecs
[ 0.353788] calling init_jiffies_clocksource+0x0/0x30 @ 1
[ 0.353788] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.354850] initcall init_jiffies_clocksource+0x0/0x30 returned 0 after 4000 usecs
[ 0.355340] calling posixtimer_init+0x0/0xd0 @ 1
[ 0.355656] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.356113] initcall posixtimer_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.356520] calling futex_init+0x0/0xe0 @ 1
[ 0.356824] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.357254] initcall futex_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.357637] calling cgroup_wq_init+0x0/0x40 @ 1
[ 0.357943] initcall cgroup_wq_init+0x0/0x40 returned 0 after 0 usecs
[ 0.358344] calling cgroup1_wq_init+0x0/0x40 @ 1
[ 0.358650] initcall cgroup1_wq_init+0x0/0x40 returned 0 after 0 usecs
[ 0.358849] calling ftrace_mod_cmd_init+0x0/0x20 @ 1
[ 0.359177] initcall ftrace_mod_cmd_init+0x0/0x20 returned 0 after 0 usecs
[ 0.359602] calling init_wakeup_tracer+0x0/0x40 @ 1
[ 0.359923] initcall init_wakeup_tracer+0x0/0x40 returned 0 after 0 usecs
[ 0.360342] calling init_graph_trace+0x0/0x70 @ 1
[ 0.360661] initcall init_graph_trace+0x0/0x70 returned 0 after 0 usecs
[ 0.361072] calling trace_events_eprobe_init_early+0x0/0x40 @ 1
[ 0.361450] initcall trace_events_eprobe_init_early+0x0/0x40 returned 0 after 0 usecs
[ 0.361932] calling trace_events_synth_init_early+0x0/0x40 @ 1
[ 0.362307] initcall trace_events_synth_init_early+0x0/0x40 returned 0 after 0 usecs
[ 0.362775] calling init_kprobe_trace_early+0x0/0x40 @ 1
[ 0.362848] initcall init_kprobe_trace_early+0x0/0x40 returned 0 after 0 usecs
[ 0.363239] calling bpf_offload_init+0x0/0x30 @ 1
[ 0.363962] initcall bpf_offload_init+0x0/0x30 returned 0 after 0 usecs
[ 0.364382] calling cgroup_bpf_wq_init+0x0/0x40 @ 1
[ 0.364701] initcall cgroup_bpf_wq_init+0x0/0x40 returned 0 after 0 usecs
[ 0.365122] calling init_events_core_sysctls+0x0/0x40 @ 1
[ 0.365477] initcall init_events_core_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.365975] calling init_callchain_sysctls+0x0/0x40 @ 1
[ 0.366377] initcall init_callchain_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.366820] calling memory_failure_init+0x0/0xd0 @ 1
[ 0.366852] initcall memory_failure_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.367277] calling cma_init_reserved_areas+0x0/0x280 @ 1
[ 0.367625] initcall cma_init_reserved_areas+0x0/0x280 returned 0 after 0 usecs
[ 0.368092] calling fsnotify_init+0x0/0xa0 @ 1
[ 0.368412] initcall fsnotify_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.368806] calling filelock_init+0x0/0x160 @ 1
[ 0.369123] initcall filelock_init+0x0/0x160 returned 0 after 0 usecs
[ 0.369566] calling init_script_binfmt+0x0/0x30 @ 1
[ 0.369896] initcall init_script_binfmt+0x0/0x30 returned 0 after 0 usecs
[ 0.370321] calling init_elf_binfmt+0x0/0x30 @ 1
[ 0.370627] initcall init_elf_binfmt+0x0/0x30 returned 0 after 0 usecs
[ 0.370848] calling init_compat_elf_binfmt+0x0/0x30 @ 1
[ 0.371191] initcall init_compat_elf_binfmt+0x0/0x30 returned 0 after 0 usecs
[ 0.371631] calling configfs_init+0x0/0x100 @ 1
[ 0.371948] initcall configfs_init+0x0/0x100 returned 0 after 0 usecs
[ 0.372349] calling debugfs_init+0x0/0x110 @ 1
[ 0.372647] initcall debugfs_init+0x0/0x110 returned 0 after 0 usecs
[ 0.373056] calling tracefs_init+0x0/0xc0 @ 1
[ 0.373358] initcall tracefs_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.373750] calling securityfs_init+0x0/0x90 @ 1
[ 0.374090] initcall securityfs_init+0x0/0x90 returned 0 after 0 usecs
[ 0.374498] calling pinctrl_init+0x0/0xd0 @ 1
[ 0.374803] pinctrl core: initialized pinctrl subsystem
[ 0.374860] initcall pinctrl_init+0x0/0xd0 returned 0 after 4000 usecs
[ 0.375268] calling gpiolib_dev_init+0x0/0x170 @ 1
[ 0.375610] initcall gpiolib_dev_init+0x0/0x170 returned 0 after 0 usecs
[ 0.376027] calling virtio_init+0x0/0x40 @ 1
[ 0.376319] initcall virtio_init+0x0/0x40 returned 0 after 0 usecs
[ 0.376713] calling regulator_init+0x0/0xc0 @ 1
[ 0.377063] probe of reg-dummy returned 0 after 0 usecs
[ 0.377403] initcall regulator_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.377809] calling iommu_init+0x0/0x40 @ 1
[ 0.378096] initcall iommu_init+0x0/0x40 returned 0 after 0 usecs
[ 0.378457] calling component_debug_init+0x0/0x30 @ 1
[ 0.378748] initcall component_debug_init+0x0/0x30 returned 0 after 0 usecs
[ 0.378848] calling early_resume_init+0x0/0xe0 @ 1
[ 0.379204] PM: RTC time: 01:18:12, date: 2025-07-03
[ 0.379527] initcall early_resume_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.379940] calling opp_debug_init+0x0/0x30 @ 1
[ 0.380241] initcall opp_debug_init+0x0/0x30 returned 0 after 0 usecs
[ 0.380693] calling cpufreq_core_init+0x0/0x110 @ 1
[ 0.381126] initcall cpufreq_core_init+0x0/0x110 returned 0 after 0 usecs
[ 0.381563] calling cpufreq_gov_performance_init+0x0/0x20 @ 1
[ 0.381928] initcall cpufreq_gov_performance_init+0x0/0x20 returned 0 after 0 usecs
[ 0.382391] calling cpufreq_gov_powersave_init+0x0/0x20 @ 1
[ 0.382749] initcall cpufreq_gov_powersave_init+0x0/0x20 returned 0 after 0 usecs
[ 0.382848] calling cpufreq_gov_userspace_init+0x0/0x20 @ 1
[ 0.383206] initcall cpufreq_gov_userspace_init+0x0/0x20 returned 0 after 0 usecs
[ 0.383671] calling CPU_FREQ_GOV_ONDEMAND_init+0x0/0x20 @ 1
[ 0.384040] initcall CPU_FREQ_GOV_ONDEMAND_init+0x0/0x20 returned 0 after 0 usecs
[ 0.384504] calling CPU_FREQ_GOV_CONSERVATIVE_init+0x0/0x20 @ 1
[ 0.384933] initcall CPU_FREQ_GOV_CONSERVATIVE_init+0x0/0x20 returned 0 after 0 usecs
[ 0.385412] calling cpuidle_init+0x0/0x30 @ 1
[ 0.385706] initcall cpuidle_init+0x0/0x30 returned 0 after 0 usecs
[ 0.386094] calling capsule_reboot_register+0x0/0x20 @ 1
[ 0.386463] initcall capsule_reboot_register+0x0/0x20 returned 0 after 0 usecs
[ 0.386850] calling unaccepted_memory_init_kdump+0x0/0x30 @ 1
[ 0.387217] initcall unaccepted_memory_init_kdump+0x0/0x30 returned 0 after 0 usecs
[ 0.387684] calling sock_init+0x0/0x100 @ 1
[ 0.388323] initcall sock_init+0x0/0x100 returned 0 after 0 usecs
[ 0.388715] calling net_inuse_init+0x0/0x40 @ 1
[ 0.389038] initcall net_inuse_init+0x0/0x40 returned 0 after 0 usecs
[ 0.389442] calling sock_struct_check+0x0/0x20 @ 1
[ 0.389759] initcall sock_struct_check+0x0/0x20 returned 0 after 0 usecs
[ 0.390180] calling init_default_flow_dissectors+0x0/0x60 @ 1
[ 0.390549] initcall init_default_flow_dissectors+0x0/0x60 returned 0 after 0 usecs
[ 0.390850] calling netlink_proto_init+0x0/0x170 @ 1
[ 0.391184] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.391568] initcall netlink_proto_init+0x0/0x170 returned 0 after 0 usecs
[ 0.392296] calling genl_init+0x0/0x50 @ 1
[ 0.392578] initcall genl_init+0x0/0x50 returned 0 after 0 usecs
[ 0.392953] calling bsp_pm_check_init+0x0/0x30 @ 1
[ 0.393267] initcall bsp_pm_check_init+0x0/0x30 returned 0 after 0 usecs
[ 0.393685] calling __gnttab_init+0x0/0x50 @ 1
[ 0.393983] initcall __gnttab_init+0x0/0x50 returned -19 after 0 usecs
[ 0.394437] calling irq_sysfs_init+0x0/0xc0 @ 1
[ 0.394793] initcall irq_sysfs_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.394850] calling dma_atomic_pool_init+0x0/0x170 @ 1
[ 0.395186] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.395623] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.396096] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.396586] initcall dma_atomic_pool_init+0x0/0x170 returned 0 after 0 usecs
[ 0.397020] calling audit_init+0x0/0x1d0 @ 1
[ 0.397305] initcall audit_init+0x0/0x1d0 returned 0 after 0 usecs
[ 0.397692] calling bdi_class_init+0x0/0x50 @ 1
[ 0.397997] initcall bdi_class_init+0x0/0x50 returned 0 after 0 usecs
[ 0.398402] calling mm_sysfs_init+0x0/0x40 @ 1
[ 0.398696] initcall mm_sysfs_init+0x0/0x40 returned 0 after 0 usecs
[ 0.398847] calling init_per_zone_wmark_min+0x0/0x40 @ 1
[ 0.399198] initcall init_per_zone_wmark_min+0x0/0x40 returned 0 after 0 usecs
[ 0.399667] calling gpiolib_sysfs_init+0x0/0x40 @ 1
[ 0.400000] initcall gpiolib_sysfs_init+0x0/0x40 returned 0 after 0 usecs
[ 0.400444] calling acpi_gpio_setup_params+0x0/0xe0 @ 1
[ 0.400801] initcall acpi_gpio_setup_params+0x0/0xe0 returned 0 after 0 usecs
[ 0.401307] calling pcibus_class_init+0x0/0x20 @ 1
[ 0.401636] initcall pcibus_class_init+0x0/0x20 returned 0 after 0 usecs
[ 0.402068] calling pci_driver_init+0x0/0x40 @ 1
[ 0.402383] initcall pci_driver_init+0x0/0x40 returned 0 after 0 usecs
[ 0.402789] calling rio_bus_init+0x0/0x50 @ 1
[ 0.402854] initcall rio_bus_init+0x0/0x50 returned 0 after 0 usecs
[ 0.403246] calling backlight_class_init+0x0/0x80 @ 1
[ 0.403581] initcall backlight_class_init+0x0/0x80 returned 0 after 0 usecs
[ 0.404033] calling xenbus_init+0x0/0x680 @ 1
[ 0.404325] initcall xenbus_init+0x0/0x680 returned -19 after 0 usecs
[ 0.404733] calling tty_class_init+0x0/0x20 @ 1
[ 0.405035] initcall tty_class_init+0x0/0x20 returned 0 after 0 usecs
[ 0.405438] calling vtconsole_class_init+0x0/0xc0 @ 1
[ 0.405790] initcall vtconsole_class_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.406219] calling serdev_init+0x0/0x30 @ 1
[ 0.406509] initcall serdev_init+0x0/0x30 returned 0 after 0 usecs
[ 0.406848] calling iommu_dev_init+0x0/0x20 @ 1
[ 0.407148] initcall iommu_dev_init+0x0/0x20 returned 0 after 0 usecs
[ 0.407546] calling mipi_dsi_bus_init+0x0/0x20 @ 1
[ 0.407861] initcall mipi_dsi_bus_init+0x0/0x20 returned 0 after 0 usecs
[ 0.408272] calling devlink_class_init+0x0/0x50 @ 1
[ 0.408592] initcall devlink_class_init+0x0/0x50 returned 0 after 0 usecs
[ 0.409008] calling software_node_init+0x0/0x40 @ 1
[ 0.409330] initcall software_node_init+0x0/0x40 returned 0 after 0 usecs
[ 0.409736] calling wakeup_sources_debugfs_init+0x0/0x40 @ 1
[ 0.410105] initcall wakeup_sources_debugfs_init+0x0/0x40 returned 0 after 0 usecs
[ 0.410575] calling wakeup_sources_sysfs_init+0x0/0x40 @ 1
[ 0.410849] initcall wakeup_sources_sysfs_init+0x0/0x40 returned 0 after 0 usecs
[ 0.411292] calling isa_bus_init+0x0/0x50 @ 1
[ 0.411556] initcall isa_bus_init+0x0/0x50 returned 0 after 0 usecs
[ 0.411971] calling regmap_initcall+0x0/0x20 @ 1
[ 0.412277] initcall regmap_initcall+0x0/0x20 returned 0 after 0 usecs
[ 0.412689] calling sram_init+0x0/0x30 @ 1
[ 0.412972] initcall sram_init+0x0/0x30 returned 0 after 0 usecs
[ 0.413415] calling spi_init+0x0/0xd0 @ 1
[ 0.413775] initcall spi_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.414150] calling i2c_init+0x0/0xc0 @ 1
[ 0.414435] initcall i2c_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.414809] calling thermal_init+0x0/0x180 @ 1
[ 0.414865] thermal_sys: Registered thermal governor 'fair_share'
[ 0.414866] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.415249] thermal_sys: Registered thermal governor 'step_wise'
[ 0.415654] thermal_sys: Registered thermal governor 'user_space'
[ 0.416030] initcall thermal_init+0x0/0x180 returned 0 after 0 usecs
[ 0.416836] calling init_ladder+0x0/0x40 @ 1
[ 0.417144] cpuidle: using governor ladder
[ 0.417434] initcall init_ladder+0x0/0x40 returned 0 after 0 usecs
[ 0.417834] calling init_menu+0x0/0x20 @ 1
[ 0.418119] cpuidle: using governor menu
[ 0.418385] initcall init_menu+0x0/0x20 returned 0 after 0 usecs
[ 0.418770] calling teo_governor_init+0x0/0x20 @ 1
[ 0.418848] initcall teo_governor_init+0x0/0x20 returned 0 after 0 usecs
[ 0.419281] calling init_haltpoll+0x0/0x40 @ 1
[ 0.419578] initcall init_haltpoll+0x0/0x40 returned 0 after 0 usecs
[ 0.419973] calling pcc_init+0x0/0xb0 @ 1
[ 0.420573] initcall pcc_init+0x0/0xb0 returned -19 after 0 usecs
[ 0.420966] calling amd_postcore_init+0x0/0x130 @ 1
[ 0.421292] initcall amd_postcore_init+0x0/0x130 returned 0 after 0 usecs
[ 0.421708] calling kobject_uevent_init+0x0/0x20 @ 1
[ 0.422038] initcall kobject_uevent_init+0x0/0x20 returned 0 after 0 usecs
[ 0.422508] calling report_snp_info+0x0/0xe0 @ 1
[ 0.422815] initcall report_snp_info+0x0/0xe0 returned 0 after 0 usecs
[ 0.422848] calling sev_sysfs_init+0x0/0xa0 @ 1
[ 0.423150] initcall sev_sysfs_init+0x0/0xa0 returned -19 after 0 usecs
[ 0.423561] calling bts_init+0x0/0x100 @ 1
[ 0.423840] initcall bts_init+0x0/0x100 returned -19 after 0 usecs
[ 0.424227] calling pt_init+0x0/0x3b0 @ 1
[ 0.424499] initcall pt_init+0x0/0x3b0 returned -19 after 0 usecs
[ 0.424886] calling init_x86_sysctl+0x0/0x40 @ 1
[ 0.425195] initcall init_x86_sysctl+0x0/0x40 returned 0 after 0 usecs
[ 0.425601] calling boot_params_ksysfs_init+0x0/0x320 @ 1
[ 0.425953] initcall boot_params_ksysfs_init+0x0/0x320 returned 0 after 0 usecs
[ 0.426398] calling sbf_init+0x0/0xf0 @ 1
[ 0.426662] initcall sbf_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.426847] calling arch_kdebugfs_init+0x0/0x30 @ 1
[ 0.427175] initcall arch_kdebugfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.427601] calling xfd_update_static_branch+0x0/0x40 @ 1
[ 0.427956] initcall xfd_update_static_branch+0x0/0x40 returned 0 after 0 usecs
[ 0.428412] calling mtrr_if_init+0x0/0x70 @ 1
[ 0.428718] initcall mtrr_if_init+0x0/0x70 returned 0 after 0 usecs
[ 0.429159] calling activate_jump_labels+0x0/0x50 @ 1
[ 0.429586] initcall activate_jump_labels+0x0/0x50 returned 0 after 0 usecs
[ 0.430022] calling init_s4_sigcheck+0x0/0x40 @ 1
[ 0.430319] initcall init_s4_sigcheck+0x0/0x40 returned 0 after 0 usecs
[ 0.430692] calling ffh_cstate_init+0x0/0x50 @ 1
[ 0.430852] initcall ffh_cstate_init+0x0/0x50 returned 0 after 0 usecs
[ 0.431254] calling kvm_alloc_cpumask+0x0/0xd0 @ 1
[ 0.431584] initcall kvm_alloc_cpumask+0x0/0xd0 returned 0 after 0 usecs
[ 0.432004] calling activate_jump_labels+0x0/0x50 @ 1
[ 0.432407] initcall activate_jump_labels+0x0/0x50 returned 0 after 0 usecs
[ 0.432873] calling gigantic_pages_init+0x0/0x40 @ 1
[ 0.433226] initcall gigantic_pages_init+0x0/0x40 returned 0 after 0 usecs
[ 0.433649] calling uv_rtc_setup_clock+0x0/0x330 @ 1
[ 0.433973] initcall uv_rtc_setup_clock+0x0/0x330 returned -19 after 0 usecs
[ 0.434407] calling kcmp_cookies_init+0x0/0x50 @ 1
[ 0.434741] initcall kcmp_cookies_init+0x0/0x50 returned 0 after 0 usecs
[ 0.434848] calling cryptomgr_init+0x0/0x20 @ 1
[ 0.435157] initcall cryptomgr_init+0x0/0x20 returned 0 after 0 usecs
[ 0.435558] calling crc32_x86_init+0x0/0x100 @ 1
[ 0.435952] initcall crc32_x86_init+0x0/0x100 returned 0 after 0 usecs
[ 0.436366] calling crc64_x86_init+0x0/0x170 @ 1
[ 0.436754] initcall crc64_x86_init+0x0/0x170 returned 0 after 0 usecs
[ 0.437158] calling crc_t10dif_x86_init+0x0/0xd0 @ 1
[ 0.437539] initcall crc_t10dif_x86_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.437964] calling acpi_pci_init+0x0/0x70 @ 1
[ 0.438262] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.438656] initcall acpi_pci_init+0x0/0x70 returned 0 after 0 usecs
[ 0.438848] calling dma_channel_table_init+0x0/0x110 @ 1
[ 0.439194] initcall dma_channel_table_init+0x0/0x110 returned 0 after 0 usecs
[ 0.439633] calling dma_bus_init+0x0/0x160 @ 1
[ 0.439972] initcall dma_bus_init+0x0/0x160 returned 0 after 0 usecs
[ 0.440370] calling register_xen_pci_notifier+0x0/0x40 @ 1
[ 0.440727] initcall register_xen_pci_notifier+0x0/0x40 returned 0 after 0 usecs
[ 0.441184] calling xen_pcpu_init+0x0/0xf0 @ 1
[ 0.441482] initcall xen_pcpu_init+0x0/0xf0 returned -19 after 0 usecs
[ 0.441849] calling serial_base_init+0x0/0x70 @ 1
[ 0.442210] initcall serial_base_init+0x0/0x70 returned 0 after 0 usecs
[ 0.442617] calling iommu_dma_init+0x0/0x30 @ 1
[ 0.442854] initcall iommu_dma_init+0x0/0x30 returned 0 after 0 usecs
[ 0.443259] calling dmi_id_init+0x0/0x400 @ 1
[ 0.443581] initcall dmi_id_init+0x0/0x400 returned 0 after 0 usecs
[ 0.443978] calling numachip_timer_init+0x0/0x70 @ 1
[ 0.444304] initcall numachip_timer_init+0x0/0x70 returned -19 after 0 usecs
[ 0.444740] calling ts_dmi_init+0x0/0xf0 @ 1
[ 0.445032] initcall ts_dmi_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.445423] calling pci_arch_init+0x0/0xa0 @ 1
[ 0.445779] PCI: Using configuration type 1 for base access
[ 0.446130] initcall pci_arch_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.446567] calling init_vdso_image_64+0x0/0x20 @ 1
[ 0.446856] initcall init_vdso_image_64+0x0/0x20 returned 0 after 0 usecs
[ 0.447336] calling init_vdso_image_32+0x0/0x20 @ 1
[ 0.447664] initcall init_vdso_image_32+0x0/0x20 returned 0 after 0 usecs
[ 0.448091] calling fixup_ht_bug+0x0/0xe0 @ 1
[ 0.448382] initcall fixup_ht_bug+0x0/0xe0 returned 0 after 0 usecs
[ 0.449192] calling mtrr_init_finalize+0x0/0x40 @ 1
[ 0.449514] initcall mtrr_init_finalize+0x0/0x40 returned 0 after 0 usecs
[ 0.449967] calling blake2s_mod_init+0x0/0x90 @ 1
[ 0.450341] initcall blake2s_mod_init+0x0/0x90 returned 0 after 0 usecs
[ 0.450779] calling uid_cache_init+0x0/0x110 @ 1
[ 0.450863] initcall uid_cache_init+0x0/0x110 returned 0 after 0 usecs
[ 0.451267] calling pid_namespace_sysctl_init+0x0/0x30 @ 1
[ 0.451628] initcall pid_namespace_sysctl_init+0x0/0x30 returned 0 after 0 usecs
[ 0.452023] calling param_sysfs_init+0x0/0x60 @ 1
[ 0.452303] initcall param_sysfs_init+0x0/0x60 returned 0 after 0 usecs
[ 0.452691] calling user_namespace_sysctl_init+0x0/0xf0 @ 1
[ 0.453055] initcall user_namespace_sysctl_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.453513] calling proc_schedstat_init+0x0/0x40 @ 1
[ 0.453839] initcall proc_schedstat_init+0x0/0x40 returned 0 after 0 usecs
[ 0.454263] calling pm_sysrq_init+0x0/0x30 @ 1
[ 0.454570] initcall pm_sysrq_init+0x0/0x30 returned 0 after 0 usecs
[ 0.454847] calling create_proc_profile+0x0/0x60 @ 1
[ 0.455170] initcall create_proc_profile+0x0/0x60 returned 0 after 0 usecs
[ 0.455599] calling crash_save_vmcoreinfo_init+0x0/0x6b0 @ 1
[ 0.455984] initcall crash_save_vmcoreinfo_init+0x0/0x6b0 returned 0 after 0 usecs
[ 0.456442] calling crash_notes_memory_init+0x0/0x50 @ 1
[ 0.456787] initcall crash_notes_memory_init+0x0/0x50 returned 0 after 0 usecs
[ 0.457233] calling crash_hotplug_init+0x0/0x50 @ 1
[ 0.457578] initcall crash_hotplug_init+0x0/0x50 returned 66 after 0 usecs
[ 0.458010] calling cgroup_sysfs_init+0x0/0x30 @ 1
[ 0.458324] initcall cgroup_sysfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.458736] calling user_namespaces_init+0x0/0x90 @ 1
[ 0.458852] initcall user_namespaces_init+0x0/0x90 returned 0 after 0 usecs
[ 0.459286] calling init_optprobes+0x0/0x50 @ 1
[ 0.459584] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.460113] initcall init_optprobes+0x0/0x50 returned 0 after 0 usecs
[ 0.460508] calling hung_task_init+0x0/0x90 @ 1
[ 0.460804] initcall hung_task_init+0x0/0x90 returned 0 after 0 usecs
[ 0.460804] calling ftrace_check_for_weak_functions+0x0/0x70 @ 1
[ 0.460804] initcall ftrace_check_for_weak_functions+0x0/0x70 returned 0 after 0 usecs
[ 0.460804] calling trace_eval_init+0x0/0xc0 @ 1
[ 0.460804] initcall trace_eval_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.460864] calling send_signal_irq_work_init+0x0/0x70 @ 1
[ 0.462850] initcall send_signal_irq_work_init+0x0/0x70 returned 0 after 0 usecs
[ 0.463369] calling dev_map_init+0x0/0x30 @ 1
[ 0.466855] initcall dev_map_init+0x0/0x30 returned 0 after 4000 usecs
[ 0.467412] calling netns_bpf_init+0x0/0x20 @ 1
[ 0.467816] initcall netns_bpf_init+0x0/0x20 returned 0 after 0 usecs
[ 0.468367] calling oom_init+0x0/0x60 @ 1
[ 0.468743] initcall oom_init+0x0/0x60 returned 0 after 0 usecs
[ 0.468743] calling init_user_buckets+0x0/0x40 @ 1
[ 0.468743] initcall init_user_buckets+0x0/0x40 returned 0 after 0 usecs
[ 0.468743] calling init_vm_util_sysctls+0x0/0x40 @ 1
[ 0.468844] initcall init_vm_util_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.470848] calling default_bdi_init+0x0/0x40 @ 1
[ 0.471286] initcall default_bdi_init+0x0/0x40 returned 0 after 0 usecs
[ 0.471434] calling cgwb_init+0x0/0x40 @ 1
[ 0.471806] initcall cgwb_init+0x0/0x40 returned 0 after 0 usecs
[ 0.472313] calling percpu_enable_async+0x0/0x20 @ 1
[ 0.472746] initcall percpu_enable_async+0x0/0x20 returned 0 after 0 usecs
[ 0.473314] calling kcompactd_init+0x0/0xa0 @ 1
[ 0.473724] initcall kcompactd_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.473724] calling init_user_reserve+0x0/0x50 @ 1
[ 0.474848] initcall init_user_reserve+0x0/0x50 returned 0 after 0 usecs
[ 0.475404] calling init_admin_reserve+0x0/0x50 @ 1
[ 0.475831] initcall init_admin_reserve+0x0/0x50 returned 0 after 0 usecs
[ 0.476395] calling init_reserve_notifier+0x0/0x40 @ 1
[ 0.476846] initcall init_reserve_notifier+0x0/0x40 returned 0 after 0 usecs
[ 0.477859] calling swap_init_sysfs+0x0/0x90 @ 1
[ 0.478292] initcall swap_init_sysfs+0x0/0x90 returned 0 after 0 usecs
[ 0.478838] calling swapfile_init+0x0/0xe0 @ 1
[ 0.478849] initcall swapfile_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.479411] calling hugetlb_init+0x0/0x610 @ 1
[ 0.479817] HugeTLB: allocation took 0ms with hugepage_allocation_threads=1
[ 0.480425] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.480991] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.481547] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.482111] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.482683] initcall hugetlb_init+0x0/0x610 returned 0 after 0 usecs
[ 0.482848] calling ksm_init+0x0/0x260 @ 1
[ 0.483243] initcall ksm_init+0x0/0x260 returned 0 after 0 usecs
[ 0.483370] calling memory_tier_init+0x0/0xe0 @ 1
[ 0.483823] initcall memory_tier_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.484372] calling numa_init_sysfs+0x0/0x90 @ 1
[ 0.484694] initcall numa_init_sysfs+0x0/0x90 returned 0 after 0 usecs
[ 0.485101] calling hugepage_init+0x0/0x400 @ 1
[ 0.485471] initcall hugepage_init+0x0/0x400 returned 0 after 0 usecs
[ 0.485471] calling mem_cgroup_init+0x0/0xb0 @ 1
[ 0.485471] initcall mem_cgroup_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.486848] calling mem_cgroup_swap_init+0x0/0x60 @ 1
[ 0.487181] initcall mem_cgroup_swap_init+0x0/0x60 returned 0 after 0 usecs
[ 0.487611] calling page_idle_init+0x0/0x50 @ 1
[ 0.487914] initcall page_idle_init+0x0/0x50 returned 0 after 0 usecs
[ 0.488312] calling init_msg_buckets+0x0/0x40 @ 1
[ 0.488658] initcall init_msg_buckets+0x0/0x40 returned 0 after 0 usecs
[ 0.489074] calling seqiv_module_init+0x0/0x20 @ 1
[ 0.489386] initcall seqiv_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.489807] calling dh_init+0x0/0x60 @ 1
[ 0.490080] initcall dh_init+0x0/0x60 returned 0 after 0 usecs
[ 0.490428] calling rsa_init+0x0/0x80 @ 1
[ 0.490668] initcall rsa_init+0x0/0x80 returned 0 after 0 usecs
[ 0.490847] calling hmac_module_init+0x0/0x20 @ 1
[ 0.491122] initcall hmac_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.491484] calling crypto_null_mod_init+0x0/0x80 @ 1
[ 0.491776] initcall crypto_null_mod_init+0x0/0x80 returned 0 after 0 usecs
[ 0.492155] calling md5_mod_init+0x0/0x20 @ 1
[ 0.492411] initcall md5_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.492770] calling sha1_generic_mod_init+0x0/0x20 @ 1
[ 0.493105] initcall sha1_generic_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.493561] calling sha256_generic_mod_init+0x0/0x30 @ 1
[ 0.493893] initcall sha256_generic_mod_init+0x0/0x30 returned 0 after 0 usecs
[ 0.494350] calling sha512_generic_mod_init+0x0/0x30 @ 1
[ 0.494694] initcall sha512_generic_mod_init+0x0/0x30 returned 0 after 0 usecs
[ 0.494848] calling sha3_generic_mod_init+0x0/0x30 @ 1
[ 0.495191] initcall sha3_generic_mod_init+0x0/0x30 returned 0 after 0 usecs
[ 0.495630] calling crypto_ecb_module_init+0x0/0x20 @ 1
[ 0.495975] initcall crypto_ecb_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.496423] calling crypto_cbc_module_init+0x0/0x20 @ 1
[ 0.496771] initcall crypto_cbc_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.497217] calling crypto_cts_module_init+0x0/0x20 @ 1
[ 0.497557] initcall crypto_cts_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.497993] calling xts_module_init+0x0/0x20 @ 1
[ 0.498296] initcall xts_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.498712] calling crypto_ctr_module_init+0x0/0x30 @ 1
[ 0.498848] initcall crypto_ctr_module_init+0x0/0x30 returned 0 after 0 usecs
[ 0.499288] calling crypto_gcm_module_init+0x0/0x90 @ 1
[ 0.499633] initcall crypto_gcm_module_init+0x0/0x90 returned 0 after 0 usecs
[ 0.500068] calling aes_init+0x0/0x20 @ 1
[ 0.500358] initcall aes_init+0x0/0x20 returned 0 after 0 usecs
[ 0.500730] calling crc32c_mod_init+0x0/0x40 @ 1
[ 0.501041] initcall crc32c_mod_init+0x0/0x40 returned 0 after 0 usecs
[ 0.501444] calling lzo_mod_init+0x0/0x20 @ 1
[ 0.501732] initcall lzo_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.502119] calling lzorle_mod_init+0x0/0x20 @ 1
[ 0.502425] initcall lzorle_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.502838] calling drbg_init+0x0/0x220 @ 1
[ 0.502857] initcall drbg_init+0x0/0x220 returned 0 after 0 usecs
[ 0.503238] calling ghash_mod_init+0x0/0x20 @ 1
[ 0.503536] initcall ghash_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.503933] calling ecdh_init+0x0/0x90 @ 1
[ 0.504213] initcall ecdh_init+0x0/0x90 returned 0 after 0 usecs
[ 0.504591] calling init_bio+0x0/0xe0 @ 1
[ 0.504892] initcall init_bio+0x0/0xe0 returned 0 after 0 usecs
[ 0.505664] calling blk_ioc_init+0x0/0x80 @ 1
[ 0.505920] initcall blk_ioc_init+0x0/0x80 returned 0 after 0 usecs
[ 0.506266] calling blk_mq_init+0x0/0x130 @ 1
[ 0.506522] initcall blk_mq_init+0x0/0x130 returned 0 after 0 usecs
[ 0.506848] calling genhd_device_init+0x0/0x60 @ 1
[ 0.507186] initcall genhd_device_init+0x0/0x60 returned 0 after 0 usecs
[ 0.507282] calling blkcg_punt_bio_init+0x0/0x40 @ 1
[ 0.507631] initcall blkcg_punt_bio_init+0x0/0x40 returned 0 after 0 usecs
[ 0.507631] calling blk_integrity_auto_init+0x0/0xe0 @ 1
[ 0.507649] initcall blk_integrity_auto_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.507649] calling io_wq_init+0x0/0x50 @ 1
[ 0.507649] initcall io_wq_init+0x0/0x50 returned 0 after 0 usecs
[ 0.507991] calling sg_pool_init+0x0/0x110 @ 1
[ 0.508294] initcall sg_pool_init+0x0/0x110 returned 0 after 0 usecs
[ 0.510848] calling irq_poll_setup+0x0/0x90 @ 1
[ 0.511146] initcall irq_poll_setup+0x0/0x90 returned 0 after 0 usecs
[ 0.511550] calling sx150x_init+0x0/0x30 @ 1
[ 0.511846] initcall sx150x_init+0x0/0x30 returned 0 after 0 usecs
[ 0.512242] calling byt_gpio_init+0x0/0x30 @ 1
[ 0.512544] initcall byt_gpio_init+0x0/0x30 returned 0 after 0 usecs
[ 0.512944] calling chv_pinctrl_init+0x0/0x30 @ 1
[ 0.513262] initcall chv_pinctrl_init+0x0/0x30 returned 0 after 0 usecs
[ 0.513669] calling gpiolib_debugfs_init+0x0/0x40 @ 1
[ 0.514010] initcall gpiolib_debugfs_init+0x0/0x40 returned 0 after 0 usecs
[ 0.514437] calling palmas_gpio_init+0x0/0x30 @ 1
[ 0.514752] initcall palmas_gpio_init+0x0/0x30 returned 0 after 0 usecs
[ 0.514848] calling rc5t583_gpio_init+0x0/0x30 @ 1
[ 0.515164] initcall rc5t583_gpio_init+0x0/0x30 returned 0 after 0 usecs
[ 0.515591] calling tps6586x_gpio_init+0x0/0x30 @ 1
[ 0.515913] initcall tps6586x_gpio_init+0x0/0x30 returned 0 after 0 usecs
[ 0.516334] calling tps65910_gpio_init+0x0/0x30 @ 1
[ 0.516656] initcall tps65910_gpio_init+0x0/0x30 returned 0 after 0 usecs
[ 0.517073] calling pwm_init+0x0/0x70 @ 1
[ 0.517344] initcall pwm_init+0x0/0x70 returned 0 after 0 usecs
[ 0.517720] calling leds_init+0x0/0x60 @ 1
[ 0.518007] initcall leds_init+0x0/0x60 returned 0 after 0 usecs
[ 0.518385] calling pci_slot_init+0x0/0x60 @ 1
[ 0.518681] initcall pci_slot_init+0x0/0x60 returned 0 after 0 usecs
[ 0.518849] calling fbmem_init+0x0/0x90 @ 1
[ 0.519150] initcall fbmem_init+0x0/0x90 returned 0 after 0 usecs
[ 0.519544] calling scan_for_dmi_ipmi+0x0/0x300 @ 1
[ 0.519861] initcall scan_for_dmi_ipmi+0x0/0x300 returned 0 after 0 usecs
[ 0.520282] calling acpi_init+0x0/0x540 @ 1
[ 0.520580] ACPI: Added _OSI(Module Device)
[ 0.520853] ACPI: Added _OSI(Processor Device)
[ 0.521140] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.521444] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.522212] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.523054] ACPI: Interpreter enabled
[ 0.523215] ACPI: PM: (supports S0 S5)
[ 0.523472] ACPI: Using IOAPIC for interrupt routing
[ 0.523816] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.524366] PCI: Using E820 reservations for host bridge windows
[ 0.524760] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.526452] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.527316] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.527861] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.528478] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.529354] acpiphp: Slot [3] registered
[ 0.529626] acpiphp: Slot [4] registered
[ 0.529896] acpiphp: Slot [5] registered
[ 0.530166] acpiphp: Slot [6] registered
[ 0.530436] acpiphp: Slot [7] registered
[ 0.530707] acpiphp: Slot [8] registered
[ 0.530857] acpiphp: Slot [9] registered
[ 0.531129] acpiphp: Slot [10] registered
[ 0.531409] acpiphp: Slot [11] registered
[ 0.531681] acpiphp: Slot [12] registered
[ 0.531965] acpiphp: Slot [13] registered
[ 0.532240] acpiphp: Slot [14] registered
[ 0.532513] acpiphp: Slot [15] registered
[ 0.532787] acpiphp: Slot [16] registered
[ 0.533061] acpiphp: Slot [17] registered
[ 0.533346] acpiphp: Slot [18] registered
[ 0.533632] acpiphp: Slot [19] registered
[ 0.533904] acpiphp: Slot [20] registered
[ 0.534179] acpiphp: Slot [21] registered
[ 0.534799] acpiphp: Slot [22] registered
[ 0.534856] acpiphp: Slot [23] registered
[ 0.535145] acpiphp: Slot [24] registered
[ 0.535422] acpiphp: Slot [25] registered
[ 0.535700] acpiphp: Slot [26] registered
[ 0.535979] acpiphp: Slot [27] registered
[ 0.536251] acpiphp: Slot [28] registered
[ 0.536523] acpiphp: Slot [29] registered
[ 0.536798] acpiphp: Slot [30] registered
[ 0.537073] acpiphp: Slot [31] registered
[ 0.537348] PCI host bridge to bus 0000:00
[ 0.537589] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.537960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.538330] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.538734] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.538848] pci_bus 0000:00: root bus resource [mem 0x240000000-0x2bfffffff window]
[ 0.539310] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.539688] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x20 @ 1
[ 0.540106] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x20 took 0 usecs
[ 0.540485] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.541124] pci 0000:00:00.0: calling quirk_igfx_skip_te_disable+0x0/0xb0 @ 1
[ 0.541576] pci 0000:00:00.0: quirk_igfx_skip_te_disable+0x0/0xb0 took 0 usecs
[ 0.542479] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.543081] pci 0000:00:01.0: calling quirk_igfx_skip_te_disable+0x0/0xb0 @ 1
[ 0.543581] pci 0000:00:01.0: quirk_igfx_skip_te_disable+0x0/0xb0 took 0 usecs
[ 0.544276] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.545325] pci 0000:00:01.1: BAR 4 [io 0xc5a0-0xc5af]
[ 0.545677] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.546094] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.546495] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.546850] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.547245] pci 0000:00:01.1: calling quirk_igfx_skip_te_disable+0x0/0xb0 @ 1
[ 0.547702] pci 0000:00:01.1: quirk_igfx_skip_te_disable+0x0/0xb0 took 0 usecs
[ 0.548219] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x50 @ 1
[ 0.548661] pci 0000:00:01.3: acpi_pm_check_blacklist+0x0/0x50 took 0 usecs
[ 0.549088] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.549768] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x180 @ 1
[ 0.550175] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.550633] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.550866] pci 0000:00:01.3: quirk_piix4_acpi+0x0/0x180 took 3906 usecs
[ 0.551287] pci 0000:00:01.3: calling quirk_igfx_skip_te_disable+0x0/0xb0 @ 1
[ 0.551725] pci 0000:00:01.3: quirk_igfx_skip_te_disable+0x0/0xb0 took 0 usecs
[ 0.552166] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0x20 @ 1
[ 0.552582] pci 0000:00:01.3: pci_fixup_piix4_acpi+0x0/0x20 took 0 usecs
[ 0.553080] pci 0000:00:02.0: [1b36:0100] type 00 class 0x030000 conventional PCI endpoint
[ 0.555790] pci 0000:00:02.0: BAR 0 [mem 0xf4000000-0xf7ffffff]
[ 0.556253] pci 0000:00:02.0: BAR 1 [mem 0xf8000000-0xfbffffff]
[ 0.556656] pci 0000:00:02.0: BAR 2 [mem 0xfc054000-0xfc055fff]
[ 0.557032] pci 0000:00:02.0: BAR 3 [io 0xc540-0xc55f]
[ 0.557377] pci 0000:00:02.0: ROM [mem 0xfc040000-0xfc04ffff pref]
[ 0.557847] pci 0000:00:02.0: calling screen_info_fixup_lfb+0x0/0x170 @ 1
[ 0.558299] pci 0000:00:02.0: screen_info_fixup_lfb+0x0/0x170 took 0 usecs
[ 0.558754] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x120 @ 1
[ 0.558871] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.559386] pci 0000:00:02.0: pci_fixup_video+0x0/0x120 took 0 usecs
[ 0.560905] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.562636] pci 0000:00:03.0: BAR 0 [io 0xc560-0xc57f]
[ 0.562853] pci 0000:00:03.0: BAR 1 [mem 0xfc056000-0xfc056fff]
[ 0.563243] pci 0000:00:03.0: BAR 4 [mem 0xfebf0000-0xfebf3fff 64bit pref]
[ 0.563680] pci 0000:00:03.0: ROM [mem 0xfc000000-0xfc03ffff pref]
[ 0.564587] pci 0000:00:04.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.565479] pci 0000:00:04.0: BAR 0 [mem 0xfc050000-0xfc053fff 64bit]
[ 0.566241] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100 conventional PCI endpoint
[ 0.567175] pci 0000:00:05.0: BAR 0 [io 0xc000-0xc3ff]
[ 0.567518] pci 0000:00:05.0: BAR 1 [io 0xc400-0xc4ff]
[ 0.567872] pci 0000:00:05.0: calling quirk_igfx_skip_te_disable+0x0/0xb0 @ 1
[ 0.568278] pci 0000:00:05.0: quirk_igfx_skip_te_disable+0x0/0xb0 took 0 usecs
[ 0.568963] pci 0000:00:06.0: [1af4:1052] type 00 class 0x098000 conventional PCI endpoint
[ 0.570133] pci 0000:00:06.0: BAR 1 [mem 0xfc057000-0xfc057fff]
[ 0.570517] pci 0000:00:06.0: BAR 4 [mem 0xfebf4000-0xfebf7fff 64bit pref]
[ 0.571450] pci 0000:00:07.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
[ 0.573279] pci 0000:00:07.0: BAR 0 [io 0xc500-0xc53f]
[ 0.573638] pci 0000:00:07.0: BAR 1 [mem 0xfc058000-0xfc058fff]
[ 0.574023] pci 0000:00:07.0: BAR 4 [mem 0xfebf8000-0xfebfbfff 64bit pref]
[ 0.575019] pci 0000:00:08.0: [1af4:1002] type 00 class 0x00ff00 conventional PCI endpoint
[ 0.576050] pci 0000:00:08.0: BAR 0 [io 0xc580-0xc59f]
[ 0.576405] pci 0000:00:08.0: BAR 4 [mem 0xfebfc000-0xfebfffff 64bit pref]
[ 0.582628] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.582900] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.583281] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.583661] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.584021] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.584635] initcall acpi_init+0x0/0x540 returned 0 after 64000 usecs
[ 0.585020] calling adxl_init+0x0/0x1b0 @ 1
[ 0.585277] initcall adxl_init+0x0/0x1b0 returned -19 after 0 usecs
[ 0.585647] calling hmat_init+0x0/0x3d0 @ 1
[ 0.585923] initcall hmat_init+0x0/0x3d0 returned 0 after 0 usecs
[ 0.586309] calling acpi_hed_driver_init+0x0/0x30 @ 1
[ 0.586681] initcall acpi_hed_driver_init+0x0/0x30 returned 0 after 0 usecs
[ 0.586852] calling pnp_init+0x0/0x20 @ 1
[ 0.587133] initcall pnp_init+0x0/0x20 returned 0 after 0 usecs
[ 0.587515] calling balloon_init+0x0/0x2d0 @ 1
[ 0.587817] initcall balloon_init+0x0/0x2d0 returned -19 after 0 usecs
[ 0.588228] calling xen_setup_shutdown_event+0x0/0x50 @ 1
[ 0.588627] initcall xen_setup_shutdown_event+0x0/0x50 returned -19 after 0 usecs
[ 0.589097] calling xenbus_probe_backend_init+0x0/0xa0 @ 1
[ 0.589814] initcall xenbus_probe_backend_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.590285] calling xenbus_probe_frontend_init+0x0/0x60 @ 1
[ 0.590663] initcall xenbus_probe_frontend_init+0x0/0x60 returned 0 after 0 usecs
[ 0.590849] calling xen_acpi_pad_init+0x0/0x60 @ 1
[ 0.591164] initcall xen_acpi_pad_init+0x0/0x60 returned -19 after 0 usecs
[ 0.591587] calling misc_init+0x0/0xb0 @ 1
[ 0.591881] initcall misc_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.592355] calling tpm_init+0x0/0xe0 @ 1
[ 0.592689] initcall tpm_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.592689] calling iommu_subsys_init+0x0/0x170 @ 1
[ 0.592689] iommu: Default domain type: Translated
[ 0.592689] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.592689] initcall iommu_subsys_init+0x0/0x170 returned 0 after 0 usecs
[ 0.592689] calling cn_init+0x0/0xf0 @ 1
[ 0.594877] initcall cn_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.595244] calling pm860x_i2c_init+0x0/0x50 @ 1
[ 0.595562] initcall pm860x_i2c_init+0x0/0x50 returned 0 after 0 usecs
[ 0.595965] calling wm8400_driver_init+0x0/0x50 @ 1
[ 0.596290] initcall wm8400_driver_init+0x0/0x50 returned 0 after 0 usecs
[ 0.596707] calling wm831x_i2c_init+0x0/0x50 @ 1
[ 0.597032] initcall wm831x_i2c_init+0x0/0x50 returned 0 after 0 usecs
[ 0.597435] calling wm831x_spi_init+0x0/0x40 @ 1
[ 0.597762] initcall wm831x_spi_init+0x0/0x40 returned 0 after 0 usecs
[ 0.598174] calling wm8350_i2c_init+0x0/0x30 @ 1
[ 0.598483] initcall wm8350_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.598848] calling tps65910_i2c_init+0x0/0x30 @ 1
[ 0.599168] initcall tps65910_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.599584] calling ezx_pcap_init+0x0/0x30 @ 1
[ 0.599884] initcall ezx_pcap_init+0x0/0x30 returned 0 after 0 usecs
[ 0.600278] calling da903x_init+0x0/0x30 @ 1
[ 0.600566] initcall da903x_init+0x0/0x30 returned 0 after 0 usecs
[ 0.600957] calling da9052_spi_init+0x0/0x50 @ 1
[ 0.601262] initcall da9052_spi_init+0x0/0x50 returned 0 after 0 usecs
[ 0.601678] calling da9052_i2c_init+0x0/0x50 @ 1
[ 0.602001] initcall da9052_i2c_init+0x0/0x50 returned 0 after 0 usecs
[ 0.602406] calling lp8788_init+0x0/0x30 @ 1
[ 0.602661] initcall lp8788_init+0x0/0x30 returned 0 after 0 usecs
[ 0.602847] calling da9055_i2c_init+0x0/0x50 @ 1
[ 0.603116] initcall da9055_i2c_init+0x0/0x50 returned 0 after 0 usecs
[ 0.603474] calling max77843_i2c_init+0x0/0x30 @ 1
[ 0.603786] initcall max77843_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.604199] calling max8925_i2c_init+0x0/0x50 @ 1
[ 0.604606] initcall max8925_i2c_init+0x0/0x50 returned 0 after 0 usecs
[ 0.605080] calling max8997_i2c_init+0x0/0x30 @ 1
[ 0.605399] initcall max8997_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.605834] calling max8998_i2c_init+0x0/0x30 @ 1
[ 0.606150] initcall max8998_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.606558] calling tps6586x_init+0x0/0x30 @ 1
[ 0.606850] initcall tps6586x_init+0x0/0x30 returned 0 after 0 usecs
[ 0.607248] calling tps65090_init+0x0/0x30 @ 1
[ 0.607547] initcall tps65090_init+0x0/0x30 returned 0 after 0 usecs
[ 0.607941] calling aat2870_init+0x0/0x30 @ 1
[ 0.608237] initcall aat2870_init+0x0/0x30 returned 0 after 0 usecs
[ 0.608629] calling palmas_i2c_init+0x0/0x30 @ 1
[ 0.608943] initcall palmas_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.609347] calling rc5t583_i2c_init+0x0/0x30 @ 1
[ 0.609675] initcall rc5t583_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.610082] calling as3711_i2c_init+0x0/0x30 @ 1
[ 0.610389] initcall as3711_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.610791] calling libnvdimm_init+0x0/0x70 @ 1
[ 0.610893] initcall libnvdimm_init+0x0/0x70 returned 0 after 0 usecs
[ 0.611297] calling dax_core_init+0x0/0x110 @ 1
[ 0.611686] initcall dax_core_init+0x0/0x110 returned 0 after 0 usecs
[ 0.612091] calling dma_buf_init+0x0/0xb0 @ 1
[ 0.612398] initcall dma_buf_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.612792] calling init_scsi+0x0/0xa0 @ 1
[ 0.613131] SCSI subsystem initialized
[ 0.613398] initcall init_scsi+0x0/0xa0 returned 0 after 0 usecs
[ 0.613773] calling ata_init+0x0/0x410 @ 1
[ 0.614069] libata version 3.00 loaded.
[ 0.614069] initcall ata_init+0x0/0x410 returned 0 after 0 usecs
[ 0.614848] calling phy_init+0x0/0x2b0 @ 1
[ 0.615156] initcall phy_init+0x0/0x2b0 returned 0 after 0 usecs
[ 0.615533] calling usb_common_init+0x0/0x30 @ 1
[ 0.615849] initcall usb_common_init+0x0/0x30 returned 0 after 0 usecs
[ 0.616255] calling usb_init+0x0/0x190 @ 1
[ 0.616544] ACPI: bus type USB registered
[ 0.616834] usbcore: registered new interface driver usbfs
[ 0.617200] usbcore: registered new interface driver hub
[ 0.617544] usbcore: registered new device driver usb
[ 0.617867] initcall usb_init+0x0/0x190 returned 0 after 0 usecs
[ 0.618657] calling xdbc_init+0x0/0x1e0 @ 1
[ 0.618849] initcall xdbc_init+0x0/0x1e0 returned 0 after 0 usecs
[ 0.619229] calling usb_roles_init+0x0/0x20 @ 1
[ 0.619532] initcall usb_roles_init+0x0/0x20 returned 0 after 0 usecs
[ 0.619941] calling serio_init+0x0/0x50 @ 1
[ 0.620228] initcall serio_init+0x0/0x50 returned 0 after 0 usecs
[ 0.620668] calling input_init+0x0/0x130 @ 1
[ 0.620974] initcall input_init+0x0/0x130 returned 0 after 0 usecs
[ 0.621367] calling rtc_init+0x0/0x40 @ 1
[ 0.621653] initcall rtc_init+0x0/0x40 returned 0 after 0 usecs
[ 0.622033] calling dw_i2c_init_driver+0x0/0x30 @ 1
[ 0.622373] initcall dw_i2c_init_driver+0x0/0x30 returned 0 after 0 usecs
[ 0.622793] calling pps_init+0x0/0xc0 @ 1
[ 0.622853] pps_core: LinuxPPS API ver. 1 registered
[ 0.623173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.623729] initcall pps_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.624111] calling ptp_init+0x0/0xa0 @ 1
[ 0.624385] PTP clock support registered
[ 0.624650] initcall ptp_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.625029] calling power_supply_class_init+0x0/0x30 @ 1
[ 0.625377] initcall power_supply_class_init+0x0/0x30 returned 0 after 0 usecs
[ 0.625821] calling hwmon_init+0x0/0x110 @ 1
[ 0.626113] initcall hwmon_init+0x0/0x110 returned 0 after 0 usecs
[ 0.626496] calling intel_tcc_init+0x0/0x40 @ 1
[ 0.626800] initcall intel_tcc_init+0x0/0x40 returned 0 after 0 usecs
[ 0.626847] calling md_init+0x0/0x190 @ 1
[ 0.627145] initcall md_init+0x0/0x190 returned 0 after 0 usecs
[ 0.627251] calling edac_init+0x0/0x90 @ 1
[ 0.627542] EDAC MC: Ver: 3.0.0
[ 0.627894] initcall edac_init+0x0/0x90 returned 0 after 0 usecs
[ 0.627894] calling mmc_init+0x0/0x50 @ 1
[ 0.627894] initcall mmc_init+0x0/0x50 returned 0 after 0 usecs
[ 0.627902] calling dmi_init+0x0/0x140 @ 1
[ 0.628210] initcall dmi_init+0x0/0x140 returned 0 after 0 usecs
[ 0.628586] calling efisubsys_init+0x0/0x610 @ 1
[ 0.628911] initcall efisubsys_init+0x0/0x610 returned 0 after 0 usecs
[ 0.629319] calling vme_init+0x0/0x20 @ 1
[ 0.630854] initcall vme_init+0x0/0x20 returned 0 after 0 usecs
[ 0.631227] calling remoteproc_init+0x0/0x80 @ 1
[ 0.631557] initcall remoteproc_init+0x0/0x80 returned 0 after 0 usecs
[ 0.631964] calling devfreq_init+0x0/0xe0 @ 1
[ 0.632280] initcall devfreq_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.632280] calling devfreq_event_init+0x0/0x60 @ 1
[ 0.632280] initcall devfreq_event_init+0x0/0x60 returned 0 after 0 usecs
[ 0.632280] calling devfreq_simple_ondemand_init+0x0/0x20 @ 1
[ 0.632361] initcall devfreq_simple_ondemand_init+0x0/0x20 returned 0 after 0 usecs
[ 0.632829] calling devfreq_performance_init+0x0/0x20 @ 1
[ 0.633174] initcall devfreq_performance_init+0x0/0x20 returned 0 after 0 usecs
[ 0.634848] calling devfreq_powersave_init+0x0/0x20 @ 1
[ 0.635186] initcall devfreq_powersave_init+0x0/0x20 returned 0 after 0 usecs
[ 0.635634] calling devfreq_userspace_init+0x0/0x20 @ 1
[ 0.635976] initcall devfreq_userspace_init+0x0/0x20 returned 0 after 0 usecs
[ 0.636431] calling devfreq_passive_init+0x0/0x20 @ 1
[ 0.636775] initcall devfreq_passive_init+0x0/0x20 returned 0 after 0 usecs
[ 0.637290] calling ras_init+0x0/0x20 @ 1
[ 0.637576] initcall ras_init+0x0/0x20 returned 0 after 0 usecs
[ 0.637951] calling nvmem_init+0x0/0x20 @ 1
[ 0.638243] initcall nvmem_init+0x0/0x20 returned 0 after 0 usecs
[ 0.638631] calling dpll_init+0x0/0x20 @ 1
[ 0.638878] initcall dpll_init+0x0/0x20 returned 0 after 0 usecs
[ 0.639261] calling proto_init+0x0/0x20 @ 1
[ 0.639545] initcall proto_init+0x0/0x20 returned 0 after 0 usecs
[ 0.639932] calling net_dev_init+0x0/0x3a0 @ 1
[ 0.640374] initcall net_dev_init+0x0/0x3a0 returned 0 after 0 usecs
[ 0.640777] calling neigh_init+0x0/0x30 @ 1
[ 0.641065] initcall neigh_init+0x0/0x30 returned 0 after 0 usecs
[ 0.641452] calling fib_notifier_init+0x0/0x20 @ 1
[ 0.641768] initcall fib_notifier_init+0x0/0x20 returned 0 after 0 usecs
[ 0.642183] calling netdev_genl_init+0x0/0x50 @ 1
[ 0.642495] initcall netdev_genl_init+0x0/0x50 returned 0 after 0 usecs
[ 0.642851] calling page_pool_user_init+0x0/0x20 @ 1
[ 0.643185] initcall page_pool_user_init+0x0/0x20 returned 0 after 0 usecs
[ 0.643609] calling fib_rules_init+0x0/0x80 @ 1
[ 0.643936] initcall fib_rules_init+0x0/0x80 returned 0 after 0 usecs
[ 0.644334] calling init_cgroup_netprio+0x0/0x30 @ 1
[ 0.644658] initcall init_cgroup_netprio+0x0/0x30 returned 0 after 0 usecs
[ 0.645082] calling bpf_lwt_init+0x0/0x30 @ 1
[ 0.645379] initcall bpf_lwt_init+0x0/0x30 returned 0 after 0 usecs
[ 0.645768] calling pktsched_init+0x0/0xc0 @ 1
[ 0.646157] initcall pktsched_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.646562] calling tc_filter_init+0x0/0xa0 @ 1
[ 0.646853] initcall tc_filter_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.647543] calling tc_action_init+0x0/0x30 @ 1
[ 0.647848] initcall tc_action_init+0x0/0x30 returned 0 after 0 usecs
[ 0.648219] calling ethnl_init+0x0/0x80 @ 1
[ 0.648490] initcall ethnl_init+0x0/0x80 returned 0 after 0 usecs
[ 0.648827] calling nexthop_init+0x0/0x40 @ 1
[ 0.649090] initcall nexthop_init+0x0/0x40 returned 0 after 0 usecs
[ 0.649436] calling devlink_init+0x0/0x70 @ 1
[ 0.649713] initcall devlink_init+0x0/0x70 returned 0 after 0 usecs
[ 0.650060] calling wireless_nlevent_init+0x0/0x50 @ 1
[ 0.650361] initcall wireless_nlevent_init+0x0/0x50 returned 0 after 0 usecs
[ 0.650749] calling rfkill_init+0x0/0x130 @ 1
[ 0.650870] initcall rfkill_init+0x0/0x130 returned 0 after 0 usecs
[ 0.651241] calling ncsi_init_netlink+0x0/0x20 @ 1
[ 0.651587] initcall ncsi_init_netlink+0x0/0x20 returned 0 after 0 usecs
[ 0.652007] calling shaper_init+0x0/0x20 @ 1
[ 0.652300] initcall shaper_init+0x0/0x20 returned 0 after 0 usecs
[ 0.652706] calling pci_subsys_init+0x0/0x80 @ 1
[ 0.653136] PCI: Using ACPI for IRQ routing
[ 0.653484] PCI: pci_cache_line_size set to 64 bytes
[ 0.653923] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.654305] e820: reserve RAM buffer [mem 0xbffdf000-0xbfffffff]
[ 0.654853] initcall pci_subsys_init+0x0/0x80 returned 0 after 4000 usecs
[ 0.655285] calling vsprintf_init_hashval+0x0/0x20 @ 1
[ 0.655638] initcall vsprintf_init_hashval+0x0/0x20 returned 0 after 0 usecs
[ 0.656079] calling efi_runtime_map_init+0x0/0x260 @ 1
[ 0.656417] initcall efi_runtime_map_init+0x0/0x260 returned 0 after 0 usecs
[ 0.656849] calling vga_arb_device_init+0x0/0xa0 @ 1
[ 0.657196] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.657196] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.657196] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.657196] vgaarb: loaded
[ 0.657196] initcall vga_arb_device_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.658848] calling watchdog_init+0x0/0xb0 @ 1
[ 0.659153] initcall watchdog_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.659381] calling nmi_warning_debugfs+0x0/0x40 @ 1
[ 0.659716] initcall nmi_warning_debugfs+0x0/0x40 returned 0 after 0 usecs
[ 0.660144] calling hpet_late_init+0x0/0x420 @ 1
[ 0.660460] initcall hpet_late_init+0x0/0x420 returned -19 after 0 usecs
[ 0.660879] calling init_amd_nbs+0x0/0x340 @ 1
[ 0.661176] initcall init_amd_nbs+0x0/0x340 returned 0 after 0 usecs
[ 0.661574] calling amd_smn_init+0x0/0x200 @ 1
[ 0.661875] initcall amd_smn_init+0x0/0x200 returned 0 after 0 usecs
[ 0.662281] calling iomem_init_inode+0x0/0xa0 @ 1
[ 0.662860] initcall iomem_init_inode+0x0/0xa0 returned 0 after 0 usecs
[ 0.663279] calling clocksource_done_booting+0x0/0x50 @ 1
[ 0.663745] clocksource: Switched to clocksource kvm-clock
[ 0.664086] initcall clocksource_done_booting+0x0/0x50 returned 0 after 346 usecs
[ 0.664491] calling tracer_init_tracefs+0x0/0xd0 @ 1
[ 0.664794] initcall tracer_init_tracefs+0x0/0xd0 returned 0 after 15 usecs
[ 0.665178] calling init_trace_printk_function_export+0x0/0x40 @ 1
[ 0.665547] initcall init_trace_printk_function_export+0x0/0x40 returned 0 after 18 usecs
[ 0.665985] calling init_graph_tracefs+0x0/0x40 @ 1
[ 0.666268] initcall init_graph_tracefs+0x0/0x40 returned 0 after 1 usecs
[ 0.666752] calling trace_events_synth_init+0x0/0x60 @ 1
[ 0.666752] initcall trace_events_synth_init+0x0/0x60 returned 0 after 1 usecs
[ 0.666880] calling bpf_event_init+0x0/0x20 @ 1
[ 0.667191] initcall bpf_event_init+0x0/0x20 returned 0 after 2 usecs
[ 0.667593] calling init_kprobe_trace+0x0/0x1e0 @ 1
[ 0.667959] initcall init_kprobe_trace+0x0/0x1e0 returned 0 after 8 usecs
[ 0.668498] calling init_dynamic_event+0x0/0x40 @ 1
[ 0.668835] initcall init_dynamic_event+0x0/0x40 returned 0 after 2 usecs
[ 0.669258] calling init_uprobe_trace+0x0/0x80 @ 1
[ 0.669577] initcall init_uprobe_trace+0x0/0x80 returned 0 after 4 usecs
[ 0.669992] calling bpf_init+0x0/0x60 @ 1
[ 0.670271] initcall bpf_init+0x0/0x60 returned 0 after 8 usecs
[ 0.670660] calling secretmem_init+0x0/0x60 @ 1
[ 0.670985] initcall secretmem_init+0x0/0x60 returned 0 after 12 usecs
[ 0.671396] calling init_fs_stat_sysctls+0x0/0x40 @ 1
[ 0.671731] initcall init_fs_stat_sysctls+0x0/0x40 returned 0 after 7 usecs
[ 0.672159] calling init_fs_exec_sysctls+0x0/0x40 @ 1
[ 0.672490] initcall init_fs_exec_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.672920] calling init_pipe_fs+0x0/0x80 @ 1
[ 0.673228] initcall init_pipe_fs+0x0/0x80 returned 0 after 10 usecs
[ 0.673621] calling init_fs_namei_sysctls+0x0/0x40 @ 1
[ 0.673954] initcall init_fs_namei_sysctls+0x0/0x40 returned 0 after 1 usecs
[ 0.674413] calling init_fs_dcache_sysctls+0x0/0x60 @ 1
[ 0.674765] initcall init_fs_dcache_sysctls+0x0/0x60 returned 0 after 4 usecs
[ 0.675206] calling init_fs_namespace_sysctls+0x0/0x40 @ 1
[ 0.676069] initcall init_fs_namespace_sysctls+0x0/0x40 returned 0 after 0 usecs
[ 0.676524] calling cgroup_writeback_init+0x0/0x40 @ 1
[ 0.676864] initcall cgroup_writeback_init+0x0/0x40 returned 0 after 2 usecs
[ 0.677297] calling inotify_user_setup+0x0/0x140 @ 1
[ 0.677630] initcall inotify_user_setup+0x0/0x140 returned 0 after 9 usecs
[ 0.678067] calling eventpoll_init+0x0/0x190 @ 1
[ 0.678402] initcall eventpoll_init+0x0/0x190 returned 0 after 17 usecs
[ 0.678809] calling anon_inode_init+0x0/0x70 @ 1
[ 0.679119] initcall anon_inode_init+0x0/0x70 returned 0 after 7 usecs
[ 0.679522] calling init_dax_wait_table+0x0/0x50 @ 1
[ 0.679882] initcall init_dax_wait_table+0x0/0x50 returned 0 after 35 usecs
[ 0.680309] calling proc_locks_init+0x0/0x40 @ 1
[ 0.680614] initcall proc_locks_init+0x0/0x40 returned 0 after 1 usecs
[ 0.681010] calling backing_aio_init+0x0/0x90 @ 1
[ 0.681287] initcall backing_aio_init+0x0/0x90 returned 0 after 2 usecs
[ 0.681649] calling init_fs_coredump_sysctls+0x0/0x40 @ 1
[ 0.681958] initcall init_fs_coredump_sysctls+0x0/0x40 returned 0 after 2 usecs
[ 0.682388] calling init_vm_drop_caches_sysctls+0x0/0x40 @ 1
[ 0.682741] initcall init_vm_drop_caches_sysctls+0x0/0x40 returned 0 after 1 usecs
[ 0.683149] calling iomap_dio_init+0x0/0x40 @ 1
[ 0.683421] initcall iomap_dio_init+0x0/0x40 returned 0 after 8 usecs
[ 0.683793] calling iomap_ioend_init+0x0/0x30 @ 1
[ 0.684118] initcall iomap_ioend_init+0x0/0x30 returned 0 after 13 usecs
[ 0.684539] calling dquot_init+0x0/0x190 @ 1
[ 0.684896] VFS: Disk quotas dquot_6.6.0
[ 0.685242] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.685688] initcall dquot_init+0x0/0x190 returned 0 after 791 usecs
[ 0.686208] calling quota_init+0x0/0x40 @ 1
[ 0.686523] initcall quota_init+0x0/0x40 returned 0 after 9 usecs
[ 0.686911] calling proc_cmdline_init+0x0/0x50 @ 1
[ 0.687237] initcall proc_cmdline_init+0x0/0x50 returned 0 after 2 usecs
[ 0.687658] calling proc_consoles_init+0x0/0x40 @ 1
[ 0.687981] initcall proc_consoles_init+0x0/0x40 returned 0 after 0 usecs
[ 0.688408] calling proc_cpuinfo_init+0x0/0x30 @ 1
[ 0.688734] initcall proc_cpuinfo_init+0x0/0x30 returned 0 after 2 usecs
[ 0.689151] calling proc_devices_init+0x0/0x40 @ 1
[ 0.689467] initcall proc_devices_init+0x0/0x40 returned 0 after 0 usecs
[ 0.689885] calling proc_interrupts_init+0x0/0x40 @ 1
[ 0.690217] initcall proc_interrupts_init+0x0/0x40 returned 0 after 0 usecs
[ 0.690663] calling proc_loadavg_init+0x0/0x40 @ 1
[ 0.690967] initcall proc_loadavg_init+0x0/0x40 returned 0 after 0 usecs
[ 0.691380] calling proc_meminfo_init+0x0/0x40 @ 1
[ 0.691701] initcall proc_meminfo_init+0x0/0x40 returned 0 after 0 usecs
[ 0.692085] calling proc_stat_init+0x0/0x30 @ 1
[ 0.692351] initcall proc_stat_init+0x0/0x30 returned 0 after 1 usecs
[ 0.692700] calling proc_uptime_init+0x0/0x40 @ 1
[ 0.692976] initcall proc_uptime_init+0x0/0x40 returned 0 after 0 usecs
[ 0.693339] calling proc_version_init+0x0/0x40 @ 1
[ 0.693655] initcall proc_version_init+0x0/0x40 returned 0 after 0 usecs
[ 0.694072] calling proc_softirqs_init+0x0/0x40 @ 1
[ 0.694423] initcall proc_softirqs_init+0x0/0x40 returned 0 after 0 usecs
[ 0.694841] calling proc_kcore_init+0x0/0x170 @ 1
[ 0.695199] initcall proc_kcore_init+0x0/0x170 returned 0 after 40 usecs
[ 0.695617] calling vmcore_init+0x0/0x920 @ 1
[ 0.695914] initcall vmcore_init+0x0/0x920 returned 0 after 2 usecs
[ 0.696308] calling proc_kmsg_init+0x0/0x30 @ 1
[ 0.696611] initcall proc_kmsg_init+0x0/0x30 returned 0 after 2 usecs
[ 0.696964] calling proc_page_init+0x0/0x70 @ 1
[ 0.697233] initcall proc_page_init+0x0/0x70 returned 0 after 4 usecs
[ 0.697587] calling init_ramfs_fs+0x0/0x20 @ 1
[ 0.697850] initcall init_ramfs_fs+0x0/0x20 returned 0 after 5 usecs
[ 0.698208] calling init_hugetlbfs_fs+0x0/0x1c0 @ 1
[ 0.698588] initcall init_hugetlbfs_fs+0x0/0x1c0 returned 0 after 46 usecs
[ 0.699013] calling aa_create_aafs+0x0/0x3c0 @ 1
[ 0.699320] initcall aa_create_aafs+0x0/0x3c0 returned 0 after 2 usecs
[ 0.699722] calling dynamic_debug_init_control+0x0/0xa0 @ 1
[ 0.700061] initcall dynamic_debug_init_control+0x0/0xa0 returned 0 after 9 usecs
[ 0.700486] calling acpi_event_init+0x0/0x50 @ 1
[ 0.700806] initcall acpi_event_init+0x0/0x50 returned 0 after 4 usecs
[ 0.701228] calling pnp_system_init+0x0/0x20 @ 1
[ 0.701661] initcall pnp_system_init+0x0/0x20 returned 0 after 34 usecs
[ 0.702081] calling pnpacpi_init+0x0/0x80 @ 1
[ 0.702387] pnp: PnP ACPI init
[ 0.702704] pnp 00:03: [dma 2]
[ 0.703031] pnp: PnP ACPI: found 5 devices
[ 0.703302] initcall pnpacpi_init+0x0/0x80 returned 0 after 915 usecs
[ 0.703706] calling chr_dev_init+0x0/0xb0 @ 1
[ 0.705405] initcall chr_dev_init+0x0/0xb0 returned 0 after 1405 usecs
[ 0.706021] calling hwrng_modinit+0x0/0xc0 @ 1
[ 0.706375] initcall hwrng_modinit+0x0/0xc0 returned 0 after 32 usecs
[ 0.706788] calling firmware_class_init+0x0/0x120 @ 1
[ 0.707135] initcall firmware_class_init+0x0/0x120 returned 0 after 15 usecs
[ 0.707572] calling map_properties+0x0/0x670 @ 1
[ 0.707881] initcall map_properties+0x0/0x670 returned 0 after 2 usecs
[ 0.708289] calling init_acpi_pm_clocksource+0x0/0x110 @ 1
[ 0.713153] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.713625] initcall init_acpi_pm_clocksource+0x0/0x110 returned 0 after 4980 usecs
[ 0.714037] calling powercap_init+0x0/0x290 @ 1
[ 0.714331] initcall powercap_init+0x0/0x290 returned 0 after 24 usecs
[ 0.714751] calling sysctl_core_init+0x0/0x40 @ 1
[ 0.715077] initcall sysctl_core_init+0x0/0x40 returned 0 after 16 usecs
[ 0.715494] calling eth_offload_init+0x0/0x30 @ 1
[ 0.715810] initcall eth_offload_init+0x0/0x30 returned 0 after 2 usecs
[ 0.716222] calling ipv4_offload_init+0x0/0xe0 @ 1
[ 0.716544] initcall ipv4_offload_init+0x0/0xe0 returned 0 after 5 usecs
[ 0.716907] calling inet_init+0x0/0x360 @ 1
[ 0.717215] NET: Registered PF_INET protocol family
[ 0.717654] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.719350] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.719890] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.720360] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.720832] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.721411] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.721834] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.722288] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.722812] initcall inet_init+0x0/0x360 returned 0 after 5630 usecs
[ 0.723164] calling af_unix_init+0x0/0x120 @ 1
[ 0.723440] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.723762] initcall af_unix_init+0x0/0x120 returned 0 after 324 usecs
[ 0.724117] calling ipv6_offload_init+0x0/0xf0 @ 1
[ 0.724395] initcall ipv6_offload_init+0x0/0xf0 returned 0 after 1 usecs
[ 0.724759] calling vlan_offload_init+0x0/0x30 @ 1
[ 0.725052] initcall vlan_offload_init+0x0/0x30 returned 0 after 0 usecs
[ 0.725423] calling xsk_init+0x0/0xa0 @ 1
[ 0.725695] NET: Registered PF_XDP protocol family
[ 0.726025] initcall xsk_init+0x0/0xa0 returned 0 after 332 usecs
[ 0.726423] calling pcibios_assign_resources+0x0/0xe0 @ 1
[ 0.726760] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.727098] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.727434] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.727804] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.728173] pci_bus 0000:00: resource 8 [mem 0x240000000-0x2bfffffff window]
[ 0.728583] initcall pcibios_assign_resources+0x0/0xe0 returned 0 after 1838 usecs
[ 0.728992] calling pci_apply_final_quirks+0x0/0x160 @ 1
[ 0.729298] pci 0000:00:00.0: calling quirk_passive_release+0x0/0xb0 @ 1
[ 0.729719] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.730044] pci 0000:00:00.0: quirk_passive_release+0x0/0xb0 took 325 usecs
[ 0.730487] pci 0000:00:00.0: calling quirk_natoma+0x0/0x40 @ 1
[ 0.730876] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.731246] pci 0000:00:00.0: quirk_natoma+0x0/0x40 took 364 usecs
[ 0.731637] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x6d0 @ 1
[ 0.743436] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[ 0.755081] pci 0000:00:04.0: quirk_usb_early_handoff+0x0/0x6d0 took 22516 usecs
[ 0.755586] PCI: CLS 0 bytes, default 64
[ 0.755847] initcall pci_apply_final_quirks+0x0/0x160 returned 0 after 26552 usecs
[ 0.756316] calling acpi_reserve_resources+0x0/0x120 @ 1
[ 0.756671] initcall acpi_reserve_resources+0x0/0x120 returned 0 after 3 usecs
[ 0.757128] calling p2sb_fs_init+0x0/0x160 @ 1
[ 0.757454] initcall p2sb_fs_init+0x0/0x160 returned -2 after 29 usecs
[ 0.757862] calling populate_rootfs+0x0/0x60 @ 1
[ 0.758245] Trying to unpack rootfs image as initramfs...
[ 0.762330] initcall populate_rootfs+0x0/0x60 returned 0 after 4159 usecs
[ 0.762786] calling pci_iommu_init+0x0/0x50 @ 1
[ 0.763098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.763505] software IO TLB: mapped [mem 0x00000000af000000-0x00000000b3000000] (64MB)
[ 0.763964] initcall pci_iommu_init+0x0/0x50 returned 0 after 869 usecs
[ 0.764346] calling ir_dev_scope_init+0x0/0x50 @ 1
[ 0.764691] initcall ir_dev_scope_init+0x0/0x50 returned 0 after 2 usecs
[ 0.765149] calling snp_init_platform_device+0x0/0x50 @ 1
[ 0.765857] initcall snp_init_platform_device+0x0/0x50 returned -19 after 3 usecs
[ 0.766340] calling ia32_binfmt_init+0x0/0x30 @ 1
[ 0.766660] initcall ia32_binfmt_init+0x0/0x30 returned 0 after 4 usecs
[ 0.767073] calling amd_ibs_init+0x0/0x370 @ 1
[ 0.767372] initcall amd_ibs_init+0x0/0x370 returned -19 after 1 usecs
[ 0.767779] calling amd_uncore_init+0x0/0x1c0 @ 1
[ 0.768090] initcall amd_uncore_init+0x0/0x1c0 returned -19 after 0 usecs
[ 0.768515] calling amd_iommu_pc_init+0x0/0x280 @ 1
[ 0.768834] initcall amd_iommu_pc_init+0x0/0x280 returned -19 after 2 usecs
[ 0.769264] calling msr_init+0x0/0x70 @ 1
[ 0.769562] initcall msr_init+0x0/0x70 returned 0 after 26 usecs
[ 0.769939] calling intel_uncore_init+0x0/0x5b0 @ 1
[ 0.770264] initcall intel_uncore_init+0x0/0x5b0 returned -19 after 2 usecs
[ 0.770705] calling register_kernel_offset_dumper+0x0/0x30 @ 1
[ 0.771082] initcall register_kernel_offset_dumper+0x0/0x30 returned 0 after 1 usecs
[ 0.771553] calling i8259A_init_ops+0x0/0x40 @ 1
[ 0.771925] initcall i8259A_init_ops+0x0/0x40 returned 0 after 64 usecs
[ 0.772340] calling init_tsc_clocksource+0x0/0xe0 @ 1
[ 0.772673] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28680fa287f, max_idle_ns: 440795281151 ns
[ 0.773276] initcall init_tsc_clocksource+0x0/0xe0 returned 0 after 604 usecs
[ 0.773723] calling add_rtc_cmos+0x0/0xc0 @ 1
[ 0.774021] initcall add_rtc_cmos+0x0/0xc0 returned 0 after 5 usecs
[ 0.774436] calling i8237A_init_ops+0x0/0x60 @ 1
[ 0.774756] initcall i8237A_init_ops+0x0/0x60 returned 0 after 8 usecs
[ 0.775169] calling umwait_init+0x0/0xb0 @ 1
[ 0.775458] initcall umwait_init+0x0/0xb0 returned -19 after 1 usecs
[ 0.775856] calling ioapic_init_ops+0x0/0x30 @ 1
[ 0.776163] initcall ioapic_init_ops+0x0/0x30 returned 0 after 0 usecs
[ 0.776566] calling register_e820_pmem+0x0/0x90 @ 1
[ 0.776892] initcall register_e820_pmem+0x0/0x90 returned 0 after 4 usecs
[ 0.777315] calling add_pcspkr+0x0/0x80 @ 1
[ 0.777640] initcall add_pcspkr+0x0/0x80 returned 0 after 40 usecs
[ 0.778035] calling start_periodic_check_for_corruption+0x0/0x60 @ 1
[ 0.778508] initcall start_periodic_check_for_corruption+0x0/0x60 returned 0 after 1 usecs
[ 0.779010] calling audit_classes_init+0x0/0xc0 @ 1
[ 0.779330] initcall audit_classes_init+0x0/0xc0 returned 0 after 3 usecs
[ 0.779749] calling pt_dump_init+0x0/0x50 @ 1
[ 0.780031] initcall pt_dump_init+0x0/0x50 returned 0 after 1 usecs
[ 0.780420] calling iosf_mbi_init+0x0/0xc0 @ 1
[ 0.780775] initcall iosf_mbi_init+0x0/0xc0 returned 0 after 20 usecs
[ 0.781180] calling proc_execdomains_init+0x0/0x30 @ 1
[ 0.781521] initcall proc_execdomains_init+0x0/0x30 returned 0 after 4 usecs
[ 0.781956] calling register_warn_debugfs+0x0/0x40 @ 1
[ 0.782293] initcall register_warn_debugfs+0x0/0x40 returned 0 after 0 usecs
[ 0.782750] calling cpuhp_sysfs_init+0x0/0x100 @ 1
[ 0.783078] initcall cpuhp_sysfs_init+0x0/0x100 returned 0 after 8 usecs
[ 0.783492] calling ioresources_init+0x0/0x60 @ 1
[ 0.783805] initcall ioresources_init+0x0/0x60 returned 0 after 1 usecs
[ 0.784218] calling psi_proc_init+0x0/0x90 @ 1
[ 0.784522] initcall psi_proc_init+0x0/0x90 returned 0 after 4 usecs
[ 0.785061] calling snapshot_device_init+0x0/0x20 @ 1
[ 0.785496] initcall snapshot_device_init+0x0/0x20 returned 0 after 59 usecs
[ 0.785962] calling irq_gc_init_ops+0x0/0x30 @ 1
[ 0.786285] initcall irq_gc_init_ops+0x0/0x30 returned 0 after 2 usecs
[ 0.786714] calling irq_pm_init_ops+0x0/0x30 @ 1
[ 0.787021] initcall irq_pm_init_ops+0x0/0x30 returned 0 after 0 usecs
[ 0.787428] calling klp_init+0x0/0x40 @ 1
[ 0.787710] initcall klp_init+0x0/0x40 returned 0 after 5 usecs
[ 0.788087] calling proc_modules_init+0x0/0x30 @ 1
[ 0.788409] initcall proc_modules_init+0x0/0x30 returned 0 after 2 usecs
[ 0.788830] calling timer_sysctl_init+0x0/0x30 @ 1
[ 0.789133] initcall timer_sysctl_init+0x0/0x30 returned 0 after 2 usecs
[ 0.789533] calling timekeeping_init_ops+0x0/0x30 @ 1
[ 0.789865] initcall timekeeping_init_ops+0x0/0x30 returned 0 after 0 usecs
[ 0.790303] calling init_clocksource_sysfs+0x0/0x40 @ 1
[ 0.790683] initcall init_clocksource_sysfs+0x0/0x40 returned 0 after 28 usecs
[ 0.791131] calling init_timer_list_procfs+0x0/0x40 @ 1
[ 0.791472] initcall init_timer_list_procfs+0x0/0x40 returned 0 after 1 usecs
[ 0.791911] calling alarmtimer_init+0x0/0xf0 @ 1
[ 0.792230] initcall alarmtimer_init+0x0/0xf0 returned 0 after 11 usecs
[ 0.792606] calling init_posix_timers+0x0/0x90 @ 1
[ 0.792890] initcall init_posix_timers+0x0/0x90 returned 0 after 3 usecs
[ 0.793253] calling clockevents_init_sysfs+0x0/0xe0 @ 1
[ 0.793584] initcall clockevents_init_sysfs+0x0/0xe0 returned 0 after 32 usecs
[ 0.793982] calling proc_dma_init+0x0/0x30 @ 1
[ 0.794259] initcall proc_dma_init+0x0/0x30 returned 0 after 2 usecs
[ 0.794815] calling kallsyms_init+0x0/0x30 @ 1
[ 0.795127] initcall kallsyms_init+0x0/0x30 returned 0 after 9 usecs
[ 0.795947] calling pid_namespaces_init+0x0/0xc0 @ 1
[ 0.796288] initcall pid_namespaces_init+0x0/0xc0 returned 0 after 16 usecs
[ 0.796737] calling ikconfig_init+0x0/0x60 @ 1
[ 0.797043] initcall ikconfig_init+0x0/0x60 returned 0 after 6 usecs
[ 0.797444] calling audit_watch_init+0x0/0x60 @ 1
[ 0.797763] initcall audit_watch_init+0x0/0x60 returned 0 after 2 usecs
[ 0.798179] calling audit_fsnotify_init+0x0/0x60 @ 1
[ 0.798543] initcall audit_fsnotify_init+0x0/0x60 returned 0 after 2 usecs
[ 0.798984] calling audit_tree_init+0x0/0xd0 @ 1
[ 0.799291] initcall audit_tree_init+0x0/0xd0 returned 0 after 1 usecs
[ 0.799700] calling seccomp_sysctl_init+0x0/0x40 @ 1
[ 0.800031] initcall seccomp_sysctl_init+0x0/0x40 returned 0 after 3 usecs
[ 0.800467] calling utsname_sysctl_init+0x0/0x30 @ 1
[ 0.800781] initcall utsname_sysctl_init+0x0/0x30 returned 0 after 4 usecs
[ 0.801157] calling init_tracepoints+0x0/0x50 @ 1
[ 0.801511] initcall init_tracepoints+0x0/0x50 returned 0 after 2 usecs
[ 0.802069] calling stack_trace_init+0x0/0xc0 @ 1
[ 0.802415] initcall stack_trace_init+0x0/0xc0 returned 0 after 15 usecs
[ 0.802827] calling init_mmio_trace+0x0/0x20 @ 1
[ 0.803134] initcall init_mmio_trace+0x0/0x20 returned 0 after 3 usecs
[ 0.803537] calling init_blk_tracer+0x0/0x70 @ 1
[ 0.803854] initcall init_blk_tracer+0x0/0x70 returned 0 after 8 usecs
[ 0.804262] calling perf_event_sysfs_init+0x0/0xb0 @ 1
[ 0.804689] initcall perf_event_sysfs_init+0x0/0xb0 returned 0 after 94 usecs
[ 0.805137] calling system_trusted_keyring_init+0x0/0x110 @ 1
[ 0.805503] Initialise system trusted keyrings
[ 0.805807] initcall system_trusted_keyring_init+0x0/0x110 returned 0 after 304 usecs
[ 0.806284] calling blacklist_init+0x0/0x100 @ 1
[ 0.806621] Key type blacklist registered
[ 0.806890] initcall blacklist_init+0x0/0x100 returned 0 after 271 usecs
[ 0.807307] calling kswapd_init+0x0/0xa0 @ 1
[ 0.807706] initcall kswapd_init+0x0/0xa0 returned 0 after 125 usecs
[ 0.808065] calling extfrag_debug_init+0x0/0x70 @ 1
[ 0.808356] initcall extfrag_debug_init+0x0/0x70 returned 0 after 4 usecs
[ 0.808773] calling mm_compute_batch_init+0x0/0x30 @ 1
[ 0.809114] initcall mm_compute_batch_init+0x0/0x30 returned 0 after 4 usecs
[ 0.809557] calling slab_proc_init+0x0/0x30 @ 1
[ 0.809864] initcall slab_proc_init+0x0/0x30 returned 0 after 5 usecs
[ 0.810267] calling workingset_init+0x0/0xd0 @ 1
[ 0.810591] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.810993] initcall workingset_init+0x0/0xd0 returned 0 after 403 usecs
[ 0.811405] calling proc_vmalloc_init+0x0/0x50 @ 1
[ 0.811722] initcall proc_vmalloc_init+0x0/0x50 returned 0 after 1 usecs
[ 0.812137] calling slab_debugfs_init+0x0/0x70 @ 1
[ 0.812463] initcall slab_debugfs_init+0x0/0x70 returned 0 after 9 usecs
[ 0.812880] calling procswaps_init+0x0/0x30 @ 1
[ 0.813186] initcall procswaps_init+0x0/0x30 returned 0 after 3 usecs
[ 0.813590] calling zs_init+0x0/0x30 @ 1
[ 0.813864] initcall zs_init+0x0/0x30 returned 0 after 4 usecs
[ 0.814230] calling ptdump_debugfs_init+0x0/0x40 @ 1
[ 0.814627] initcall ptdump_debugfs_init+0x0/0x40 returned 0 after 8 usecs
[ 0.815137] calling fcntl_init+0x0/0x80 @ 1
[ 0.815546] initcall fcntl_init+0x0/0x80 returned 0 after 5 usecs
[ 0.816102] calling proc_filesystems_init+0x0/0x30 @ 1
[ 0.816616] initcall proc_filesystems_init+0x0/0x30 returned 0 after 2 usecs
[ 0.817233] calling start_dirtytime_writeback+0x0/0x60 @ 1
[ 0.817718] initcall start_dirtytime_writeback+0x0/0x60 returned 0 after 6 usecs
[ 0.818441] calling dio_init+0x0/0x90 @ 1
[ 0.818854] initcall dio_init+0x0/0x90 returned 0 after 3 usecs
[ 0.819422] calling dnotify_init+0x0/0x120 @ 1
[ 0.819834] initcall dnotify_init+0x0/0x120 returned 0 after 19 usecs
[ 0.820237] calling fanotify_user_setup+0x0/0x250 @ 1
[ 0.820576] initcall fanotify_user_setup+0x0/0x250 returned 0 after 4 usecs
[ 0.821009] calling userfaultfd_init+0x0/0xc0 @ 1
[ 0.821378] initcall userfaultfd_init+0x0/0xc0 returned 0 after 56 usecs
[ 0.821803] calling aio_setup+0x0/0x120 @ 1
[ 0.822105] initcall aio_setup+0x0/0x120 returned 0 after 17 usecs
[ 0.822527] calling mbcache_init+0x0/0x90 @ 1
[ 0.822832] initcall mbcache_init+0x0/0x90 returned 0 after 3 usecs
[ 0.823229] calling init_devpts_fs+0x0/0x50 @ 1
[ 0.823539] initcall init_devpts_fs+0x0/0x50 returned 0 after 7 usecs
[ 0.823946] calling ext4_init_fs+0x0/0x210 @ 1
[ 0.824314] initcall ext4_init_fs+0x0/0x210 returned 0 after 62 usecs
[ 0.824726] calling journal_init+0x0/0x1f0 @ 1
[ 0.825039] initcall journal_init+0x0/0x1f0 returned 0 after 12 usecs
[ 0.825873] calling init_squashfs_fs+0x0/0xd0 @ 1
[ 0.826347] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.826866] initcall init_squashfs_fs+0x0/0xd0 returned 0 after 529 usecs
[ 0.827458] calling init_fat_fs+0x0/0xb0 @ 1
[ 0.827869] initcall init_fat_fs+0x0/0xb0 returned 0 after 7 usecs
[ 0.828461] calling init_vfat_fs+0x0/0x20 @ 1
[ 0.828939] initcall init_vfat_fs+0x0/0x20 returned 0 after 4 usecs
[ 0.829567] calling ecryptfs_init+0x0/0x230 @ 1
[ 0.830282] initcall ecryptfs_init+0x0/0x230 returned 0 after 243 usecs
[ 0.830968] calling init_nls_cp437+0x0/0x30 @ 1
[ 0.831421] initcall init_nls_cp437+0x0/0x30 returned 0 after 4 usecs
[ 0.831930] calling fuse_init+0x0/0x250 @ 1
[ 0.832278] fuse: init (API version 7.43)
[ 0.832695] initcall fuse_init+0x0/0x250 returned 0 after 417 usecs
[ 0.833260] calling efivarfs_init+0x0/0x20 @ 1
[ 0.833701] initcall efivarfs_init+0x0/0x20 returned 0 after 1 usecs
[ 0.834411] calling ipc_init+0x0/0x40 @ 1
[ 0.834895] initcall ipc_init+0x0/0x40 returned 0 after 13 usecs
[ 0.835491] calling ipc_sysctl_init+0x0/0x40 @ 1
[ 0.835963] initcall ipc_sysctl_init+0x0/0x40 returned 0 after 16 usecs
[ 0.836584] calling init_mqueue_fs+0x0/0x160 @ 1
[ 0.837075] initcall init_mqueue_fs+0x0/0x160 returned 0 after 33 usecs
[ 0.837645] calling key_proc_init+0x0/0x80 @ 1
[ 0.838066] initcall key_proc_init+0x0/0x80 returned 0 after 3 usecs
[ 0.838641] calling selinux_nf_ip_init+0x0/0x60 @ 1
[ 0.839123] initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 4 usecs
[ 0.839714] calling init_sel_fs+0x0/0x140 @ 1
[ 0.840122] initcall init_sel_fs+0x0/0x140 returned 0 after 0 usecs
[ 0.840682] calling selnl_init+0x0/0xa0 @ 1
[ 0.841048] initcall selnl_init+0x0/0xa0 returned 0 after 8 usecs
[ 0.841532] calling sel_netif_init+0x0/0x50 @ 1
[ 0.841907] initcall sel_netif_init+0x0/0x50 returned 0 after 0 usecs
[ 0.842432] calling sel_netnode_init+0x0/0x40 @ 1
[ 0.842869] initcall sel_netnode_init+0x0/0x40 returned 0 after 0 usecs
[ 0.843399] calling sel_netport_init+0x0/0x40 @ 1
[ 0.843774] initcall sel_netport_init+0x0/0x40 returned 0 after 0 usecs
[ 0.844308] calling aurule_init+0x0/0x40 @ 1
[ 0.844721] initcall aurule_init+0x0/0x40 returned 0 after 8 usecs
[ 0.845270] calling apparmor_nf_ip_init+0x0/0x50 @ 1
[ 0.845776] initcall apparmor_nf_ip_init+0x0/0x50 returned 0 after 0 usecs
[ 0.846388] calling bpf_crypto_skcipher_init+0x0/0x20 @ 1
[ 0.846884] initcall bpf_crypto_skcipher_init+0x0/0x20 returned 0 after 6 usecs
[ 0.847534] calling crypto_hkdf_module_init+0x0/0x20 @ 1
[ 0.848055] initcall crypto_hkdf_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.848732] calling jent_mod_init+0x0/0xf0 @ 1
[ 0.855966] initcall jent_mod_init+0x0/0xf0 returned 0 after 6806 usecs
[ 0.856412] calling asymmetric_key_init+0x0/0x20 @ 1
[ 0.856736] Key type asymmetric registered
[ 0.857005] initcall asymmetric_key_init+0x0/0x20 returned 0 after 270 usecs
[ 0.857470] calling x509_key_init+0x0/0x20 @ 1
[ 0.857741] Freeing initrd memory: 72972K
[ 0.857766] Asymmetric key parser 'x509' registered
[ 0.858381] initcall x509_key_init+0x0/0x20 returned 0 after 616 usecs
[ 0.858788] calling crypto_kdf108_init+0x0/0x20 @ 1
[ 0.859112] initcall crypto_kdf108_init+0x0/0x20 returned 0 after 0 usecs
[ 0.859536] calling blkdev_init+0x0/0x30 @ 1
[ 0.859817] initcall blkdev_init+0x0/0x30 returned 0 after 14 usecs
[ 0.860162] calling proc_genhd_init+0x0/0x50 @ 1
[ 0.860435] initcall proc_genhd_init+0x0/0x50 returned 0 after 3 usecs
[ 0.860798] calling bsg_init+0x0/0xa0 @ 1
[ 0.861046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.861446] initcall bsg_init+0x0/0xa0 returned 0 after 409 usecs
[ 0.861782] calling throtl_init+0x0/0x50 @ 1
[ 0.862202] initcall throtl_init+0x0/0x50 returned 0 after 167 usecs
[ 0.862602] calling ioc_init+0x0/0x20 @ 1
[ 0.862864] initcall ioc_init+0x0/0x20 returned 0 after 4 usecs
[ 0.863198] calling deadline_init+0x0/0x20 @ 1
[ 0.863468] io scheduler mq-deadline registered
[ 0.863730] initcall deadline_init+0x0/0x20 returned 0 after 263 usecs
[ 0.864089] calling bfq_init+0x0/0xf0 @ 1
[ 0.864341] io scheduler bfq registered
[ 0.864567] initcall bfq_init+0x0/0xf0 returned 0 after 240 usecs
[ 0.864907] calling io_uring_init+0x0/0xe0 @ 1
[ 0.865183] initcall io_uring_init+0x0/0xe0 returned 0 after 12 usecs
[ 0.865538] calling blake2s_mod_init+0x0/0x20 @ 1
[ 0.865814] initcall blake2s_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.866176] calling btree_module_init+0x0/0x80 @ 1
[ 0.866487] initcall btree_module_init+0x0/0x80 returned 0 after 1 usecs
[ 0.866904] calling percpu_counter_startup+0x0/0x70 @ 1
[ 0.867385] initcall percpu_counter_startup+0x0/0x70 returned 0 after 136 usecs
[ 0.867791] calling digsig_init+0x0/0x50 @ 1
[ 0.868050] initcall digsig_init+0x0/0x50 returned 0 after 5 usecs
[ 0.868426] calling phy_core_init+0x0/0x60 @ 1
[ 0.868875] initcall phy_core_init+0x0/0x60 returned 0 after 17 usecs
[ 0.869364] calling amd_gpio_driver_init+0x0/0x30 @ 1
[ 0.869708] initcall amd_gpio_driver_init+0x0/0x30 returned 0 after 14 usecs
[ 0.870142] calling crystalcove_pwm_driver_init+0x0/0x30 @ 1
[ 0.870521] initcall crystalcove_pwm_driver_init+0x0/0x30 returned 0 after 4 usecs
[ 0.870982] calling pwm_lpss_driver_pci_init+0x0/0x30 @ 1
[ 0.871340] initcall pwm_lpss_driver_pci_init+0x0/0x30 returned 0 after 10 usecs
[ 0.871787] calling pwm_lpss_driver_platform_init+0x0/0x30 @ 1
[ 0.872158] initcall pwm_lpss_driver_platform_init+0x0/0x30 returned 0 after 2 usecs
[ 0.872624] calling ledtrig_disk_init+0x0/0x50 @ 1
[ 0.872939] initcall ledtrig_disk_init+0x0/0x50 returned 0 after 1 usecs
[ 0.873355] calling ledtrig_mtd_init+0x0/0x40 @ 1
[ 0.873668] initcall ledtrig_mtd_init+0x0/0x40 returned 0 after 0 usecs
[ 0.874077] calling ledtrig_cpu_init+0x0/0x100 @ 1
[ 0.874574] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.874952] initcall ledtrig_cpu_init+0x0/0x100 returned 0 after 550 usecs
[ 0.875337] calling ledtrig_panic_init+0x0/0x60 @ 1
[ 0.875623] initcall ledtrig_panic_init+0x0/0x60 returned 0 after 1 usecs
[ 0.876009] calling pcie_portdrv_init+0x0/0x60 @ 1
[ 0.876303] initcall pcie_portdrv_init+0x0/0x60 returned 0 after 18 usecs
[ 0.876722] calling pci_proc_init+0x0/0x80 @ 1
[ 0.877027] initcall pci_proc_init+0x0/0x80 returned 0 after 10 usecs
[ 0.877444] calling pci_hotplug_init+0x0/0x50 @ 1
[ 0.877756] initcall pci_hotplug_init+0x0/0x50 returned 0 after 0 usecs
[ 0.878165] calling shpcd_init+0x0/0x30 @ 1
[ 0.878472] initcall shpcd_init+0x0/0x30 returned 0 after 6 usecs
[ 0.878854] calling pci_ep_cfs_init+0x0/0x100 @ 1
[ 0.879192] initcall pci_ep_cfs_init+0x0/0x100 returned 0 after 27 usecs
[ 0.879576] calling pci_epc_init+0x0/0x20 @ 1
[ 0.879833] initcall pci_epc_init+0x0/0x20 returned 0 after 1 usecs
[ 0.880177] calling pci_epf_init+0x0/0x50 @ 1
[ 0.880468] initcall pci_epf_init+0x0/0x50 returned 0 after 7 usecs
[ 0.880867] calling dw_plat_pcie_driver_init+0x0/0x30 @ 1
[ 0.881216] initcall dw_plat_pcie_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 0.881663] calling imsttfb_init+0x0/0x150 @ 1
[ 0.881969] initcall imsttfb_init+0x0/0x150 returned 0 after 10 usecs
[ 0.882395] calling asiliantfb_init+0x0/0x60 @ 1
[ 0.882683] initcall asiliantfb_init+0x0/0x60 returned 0 after 5 usecs
[ 0.883048] calling vesafb_driver_init+0x0/0x30 @ 1
[ 0.883328] initcall vesafb_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 0.883706] calling efifb_driver_init+0x0/0x30 @ 1
[ 0.884027] initcall efifb_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 0.884478] calling simplefb_driver_init+0x0/0x30 @ 1
[ 0.884919] initcall simplefb_driver_init+0x0/0x30 returned 0 after 7 usecs
[ 0.885652] calling intel_idle_init+0x0/0xd90 @ 1
[ 0.885972] initcall intel_idle_init+0x0/0xd90 returned -19 after 6 usecs
[ 0.886406] calling ged_driver_init+0x0/0x30 @ 1
[ 0.886715] initcall ged_driver_init+0x0/0x30 returned 0 after 6 usecs
[ 0.887119] calling acpi_ac_init+0x0/0x60 @ 1
[ 0.887432] initcall acpi_ac_init+0x0/0x60 returned 0 after 23 usecs
[ 0.887842] calling acpi_button_driver_init+0x0/0x70 @ 1
[ 0.888243] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.888746] ACPI: button: Power Button [PWRF]
[ 0.889038] probe of LNXPWRBN:00 returned 0 after 845 usecs
[ 0.889395] initcall acpi_button_driver_init+0x0/0x70 returned 0 after 1209 usecs
[ 0.889810] calling acpi_fan_driver_init+0x0/0x30 @ 1
[ 0.890099] initcall acpi_fan_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 0.890512] calling acpi_processor_driver_init+0x0/0xd0 @ 1
[ 0.890856] probe of cpu0 returned 0 after 11 usecs
[ 0.891140] probe of cpu1 returned 0 after 7 usecs
[ 0.891420] probe of cpu2 returned 0 after 7 usecs
[ 0.891708] probe of cpu3 returned 0 after 7 usecs
[ 0.892346] initcall acpi_processor_driver_init+0x0/0xd0 returned 0 after 1506 usecs
[ 0.892761] calling acpi_thermal_init+0x0/0xa0 @ 1
[ 0.893227] initcall acpi_thermal_init+0x0/0xa0 returned 0 after 183 usecs
[ 0.893652] calling acpi_battery_init+0x0/0x60 @ 1
[ 0.893975] initcall acpi_battery_init+0x0/0x60 returned 0 after 11 usecs
[ 0.894408] calling bgrt_init+0x0/0xe0 @ 1
[ 0.894688] initcall bgrt_init+0x0/0xe0 returned -19 after 1 usecs
[ 0.895040] calling acpi_aml_init+0x0/0xe0 @ 1
[ 0.895315] initcall acpi_aml_init+0x0/0xe0 returned 0 after 9 usecs
[ 0.895714] calling erst_init+0x0/0x350 @ 1
[ 0.896003] initcall erst_init+0x0/0x350 returned 0 after 0 usecs
[ 0.896361] calling gpio_clk_driver_init+0x0/0x30 @ 1
[ 0.896694] initcall gpio_clk_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 0.897125] calling gated_fixed_clk_driver_init+0x0/0x30 @ 1
[ 0.897496] initcall gated_fixed_clk_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 0.897966] calling fch_clk_driver_init+0x0/0x30 @ 1
[ 0.898296] initcall fch_clk_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 0.898731] calling plt_clk_driver_init+0x0/0x30 @ 1
[ 0.899049] initcall plt_clk_driver_init+0x0/0x30 returned 0 after 1 usecs
[ 0.899427] calling virtio_mmio_init+0x0/0x30 @ 1
[ 0.899706] initcall virtio_mmio_init+0x0/0x30 returned 0 after 3 usecs
[ 0.900065] calling virtio_pci_driver_init+0x0/0x30 @ 1
[ 0.911049] ACPI: \_SB_.LNKC: Enabled at IRQ 10
[ 0.911921] probe of 0000:00:03.0 returned 0 after 11538 usecs
[ 0.923004] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[ 0.923893] probe of 0000:00:06.0 returned 0 after 11610 usecs
[ 0.935396] probe of 0000:00:07.0 returned 0 after 11134 usecs
[ 0.946789] probe of 0000:00:08.0 returned 0 after 11003 usecs
[ 0.947144] initcall virtio_pci_driver_init+0x0/0x30 returned 0 after 46765 usecs
[ 0.947561] calling virtio_balloon_driver_init+0x0/0x30 @ 1
[ 0.948442] probe of virtio3 returned 0 after 542 usecs
[ 0.948744] initcall virtio_balloon_driver_init+0x0/0x30 returned 0 after 846 usecs
[ 0.949164] calling xenbus_probe_initcall+0x0/0xb0 @ 1
[ 0.949462] initcall xenbus_probe_initcall+0x0/0xb0 returned -19 after 0 usecs
[ 0.949900] calling xenbus_init+0x0/0x60 @ 1
[ 0.950192] initcall xenbus_init+0x0/0x60 returned -19 after 0 usecs
[ 0.950611] calling xenbus_backend_init+0x0/0x60 @ 1
[ 0.950914] initcall xenbus_backend_init+0x0/0x60 returned -19 after 0 usecs
[ 0.951318] calling hyper_sysfs_init+0x0/0x250 @ 1
[ 0.951750] initcall hyper_sysfs_init+0x0/0x250 returned -19 after 0 usecs
[ 0.952203] calling hypervisor_subsys_init+0x0/0x40 @ 1
[ 0.952517] initcall hypervisor_subsys_init+0x0/0x40 returned -19 after 0 usecs
[ 0.952917] calling platform_driver_init+0x0/0x30 @ 1
[ 0.953270] initcall platform_driver_init+0x0/0x30 returned 0 after 23 usecs
[ 0.953702] calling xen_late_init_mcelog+0x0/0x90 @ 1
[ 0.954031] initcall xen_late_init_mcelog+0x0/0x90 returned -19 after 0 usecs
[ 0.954490] calling xen_acpi_processor_init+0x0/0x200 @ 1
[ 0.954846] initcall xen_acpi_processor_init+0x0/0x200 returned -19 after 0 usecs
[ 0.955320] calling n_null_init+0x0/0x30 @ 1
[ 0.955599] initcall n_null_init+0x0/0x30 returned 0 after 2 usecs
[ 0.955944] calling pty_init+0x0/0x400 @ 1
[ 0.956240] initcall pty_init+0x0/0x400 returned 0 after 50 usecs
[ 0.956594] calling sysrq_init+0x0/0x90 @ 1
[ 0.956847] initcall sysrq_init+0x0/0x90 returned 0 after 2 usecs
[ 0.957185] calling xen_hvc_init+0x0/0x200 @ 1
[ 0.957447] initcall xen_hvc_init+0x0/0x200 returned -19 after 0 usecs
[ 0.957806] calling serial8250_init+0x0/0x130 @ 1
[ 0.958110] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.958542] probe of 00:00:0 returned 0 after 2 usecs
[ 0.958845] probe of 00:00:0.0 returned 0 after 1 usecs
[ 0.959286] 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.959759] probe of 00:00 returned 0 after 1239 usecs
[ 0.960131] probe of serial8250:0 returned 0 after 1 usecs
[ 0.960489] probe of serial8250:0.1 returned 0 after 1 usecs
[ 0.960860] probe of serial8250:0.2 returned 0 after 1 usecs
[ 0.961222] probe of serial8250:0.3 returned 0 after 1 usecs
[ 0.961612] probe of serial8250:0.4 returned 0 after 1 usecs
[ 0.962001] probe of serial8250:0.5 returned 0 after 1 usecs
[ 0.962588] probe of serial8250:0.6 returned 0 after 2 usecs
[ 0.962957] probe of serial8250:0.7 returned 0 after 1 usecs
[ 0.963303] probe of serial8250:0.8 returned 0 after 1 usecs
[ 0.963654] probe of serial8250:0.9 returned 0 after 1 usecs
[ 0.963996] probe of serial8250:0.10 returned 0 after 1 usecs
[ 0.964362] probe of serial8250:0.11 returned 0 after 1 usecs
[ 0.964715] probe of serial8250:0.12 returned 0 after 1 usecs
[ 0.965066] probe of serial8250:0.13 returned 0 after 1 usecs
[ 0.965420] probe of serial8250:0.14 returned 0 after 1 usecs
[ 0.965773] probe of serial8250:0.15 returned 0 after 2 usecs
[ 0.966124] probe of serial8250:0.16 returned 0 after 1 usecs
[ 0.966514] probe of serial8250:0.17 returned 0 after 1 usecs
[ 0.966881] probe of serial8250:0.18 returned 0 after 1 usecs
[ 0.967259] probe of serial8250:0.19 returned 0 after 1 usecs
[ 0.967660] probe of serial8250:0.20 returned 0 after 1 usecs
[ 0.968075] probe of serial8250:0.21 returned 0 after 2 usecs
[ 0.968663] probe of serial8250:0.22 returned 0 after 2 usecs
[ 0.969068] probe of serial8250:0.23 returned 0 after 1 usecs
[ 0.969469] probe of serial8250:0.24 returned 0 after 1 usecs
[ 0.969868] probe of serial8250:0.25 returned 0 after 1 usecs
[ 0.970270] probe of serial8250:0.26 returned 0 after 2 usecs
[ 0.970714] probe of serial8250:0.27 returned 0 after 2 usecs
[ 0.971113] probe of serial8250:0.28 returned 0 after 2 usecs
[ 0.971481] probe of serial8250:0.29 returned 0 after 1 usecs
[ 0.971831] probe of serial8250:0.30 returned 0 after 1 usecs
[ 0.972182] probe of serial8250:0.31 returned 0 after 1 usecs
[ 0.972539] probe of serial8250 returned 0 after 5 usecs
[ 0.972886] initcall serial8250_init+0x0/0x130 returned 0 after 14776 usecs
[ 0.973264] calling serial_pci_driver_init+0x0/0x30 @ 1
[ 0.973581] initcall serial_pci_driver_init+0x0/0x30 returned 0 after 17 usecs
[ 0.973970] calling pericom8250_pci_driver_init+0x0/0x30 @ 1
[ 0.974295] initcall pericom8250_pci_driver_init+0x0/0x30 returned 0 after 6 usecs
[ 0.974762] calling max310x_uart_init+0x0/0x80 @ 1
[ 0.975090] initcall max310x_uart_init+0x0/0x80 returned 0 after 11 usecs
[ 0.975848] calling sccnxp_uart_driver_init+0x0/0x30 @ 1
[ 0.976156] initcall sccnxp_uart_driver_init+0x0/0x30 returned 0 after 3 usecs
[ 0.976549] calling init_kgdboc+0x0/0x90 @ 1
[ 0.976823] probe of kgdboc returned 0 after 4 usecs
[ 0.977109] initcall init_kgdboc+0x0/0x90 returned 0 after 303 usecs
[ 0.977463] calling random_sysctls_init+0x0/0x40 @ 1
[ 0.977759] initcall random_sysctls_init+0x0/0x40 returned 0 after 5 usecs
[ 0.978146] calling ttyprintk_init+0x0/0x140 @ 1
[ 0.978507] initcall ttyprintk_init+0x0/0x140 returned 0 after 34 usecs
[ 0.978913] calling virtio_console_init+0x0/0xf0 @ 1
[ 0.983880] probe of virtio2 returned 0 after 4675 usecs
[ 0.984243] initcall virtio_console_init+0x0/0xf0 returned 0 after 5047 usecs
[ 0.984734] calling hpet_init+0x0/0xa0 @ 1
[ 0.985186] initcall hpet_init+0x0/0xa0 returned 0 after 60 usecs
[ 0.985584] calling agp_init+0x0/0x40 @ 1
[ 0.985859] Linux agpgart interface v0.103
[ 0.986136] initcall agp_init+0x0/0x40 returned 0 after 277 usecs
[ 0.986727] calling agp_amd64_mod_init+0x0/0x40 @ 1
[ 0.987094] initcall agp_amd64_mod_init+0x0/0x40 returned -19 after 35 usecs
[ 0.987536] calling agp_intel_init+0x0/0x40 @ 1
[ 0.987887] probe of 0000:00:00.0 returned 19 after 36 usecs
[ 0.988258] initcall agp_intel_init+0x0/0x40 returned 0 after 409 usecs
[ 0.988673] calling agp_via_init+0x0/0x40 @ 1
[ 0.988972] initcall agp_via_init+0x0/0x40 returned 0 after 4 usecs
[ 0.989365] calling init_tis+0x0/0xf0 @ 1
[ 0.989651] initcall init_tis+0x0/0xf0 returned 0 after 12 usecs
[ 0.990028] calling crb_acpi_driver_init+0x0/0x30 @ 1
[ 0.990382] initcall crb_acpi_driver_init+0x0/0x30 returned 0 after 10 usecs
[ 0.990822] calling cn_proc_init+0x0/0x60 @ 1
[ 0.991117] initcall cn_proc_init+0x0/0x60 returned 0 after 0 usecs
[ 0.991509] calling topology_sysfs_init+0x0/0x40 @ 1
[ 0.991858] initcall topology_sysfs_init+0x0/0x40 returned 0 after 18 usecs
[ 0.992292] calling cacheinfo_sysfs_init+0x0/0x40 @ 1
[ 0.992852] initcall cacheinfo_sysfs_init+0x0/0x40 returned 0 after 227 usecs
[ 0.993294] calling devcoredump_init+0x0/0x20 @ 1
[ 0.993609] initcall devcoredump_init+0x0/0x20 returned 0 after 4 usecs
[ 0.994020] calling loop_init+0x0/0x100 @ 1
[ 0.995443] loop: module loaded
[ 0.995673] initcall loop_init+0x0/0x100 returned 0 after 1361 usecs
[ 0.996081] calling xlblk_init+0x0/0x190 @ 1
[ 0.996375] initcall xlblk_init+0x0/0x190 returned -19 after 0 usecs
[ 0.996779] calling tps65912_i2c_driver_init+0x0/0x30 @ 1
[ 0.997144] initcall tps65912_i2c_driver_init+0x0/0x30 returned 0 after 8 usecs
[ 0.997599] calling tps65912_spi_driver_init+0x0/0x30 @ 1
[ 0.997956] initcall tps65912_spi_driver_init+0x0/0x30 returned 0 after 4 usecs
[ 0.998420] calling twl_driver_init+0x0/0x30 @ 1
[ 0.998730] initcall twl_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 0.999137] calling twl4030_audio_driver_init+0x0/0x30 @ 1
[ 0.999496] initcall twl4030_audio_driver_init+0x0/0x30 returned 0 after 6 usecs
[ 0.999922] calling twl6040_driver_init+0x0/0x30 @ 1
[ 1.000213] initcall twl6040_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 1.000629] calling da9063_i2c_driver_init+0x0/0x30 @ 1
[ 1.000978] initcall da9063_i2c_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 1.001449] calling max14577_i2c_init+0x0/0x30 @ 1
[ 1.001795] initcall max14577_i2c_init+0x0/0x30 returned 0 after 4 usecs
[ 1.002212] calling max77693_i2c_driver_init+0x0/0x30 @ 1
[ 1.002583] initcall max77693_i2c_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 1.003021] calling adp5520_driver_init+0x0/0x30 @ 1
[ 1.003310] initcall adp5520_driver_init+0x0/0x30 returned 0 after 1 usecs
[ 1.003683] calling crystal_cove_i2c_driver_init+0x0/0x30 @ 1
[ 1.004052] initcall crystal_cove_i2c_driver_init+0x0/0x30 returned 0 after 3 usecs
[ 1.004513] calling cht_wc_driver_init+0x0/0x30 @ 1
[ 1.004799] initcall cht_wc_driver_init+0x0/0x30 returned 0 after 2 usecs
[ 1.005167] calling e820_pmem_driver_init+0x0/0x30 @ 1
[ 1.005845] initcall e820_pmem_driver_init+0x0/0x30 returned 0 after 11 usecs
[ 1.006293] calling hmem_init+0x0/0x40 @ 1
[ 1.006596] initcall hmem_init+0x0/0x40 returned 0 after 2 usecs
[ 1.006983] calling udmabuf_dev_init+0x0/0xc0 @ 1
[ 1.007432] initcall udmabuf_dev_init+0x0/0xc0 returned 0 after 135 usecs
[ 1.007855] calling init_sd+0x0/0x140 @ 1
[ 1.008137] initcall init_sd+0x0/0x140 returned 0 after 10 usecs
[ 1.008520] calling init_sr+0x0/0x60 @ 1
[ 1.008791] initcall init_sr+0x0/0x60 returned 0 after 2 usecs
[ 1.009157] calling init_sg+0x0/0x200 @ 1
[ 1.009403] initcall init_sg+0x0/0x200 returned 0 after 6 usecs
[ 1.009730] calling piix_init+0x0/0x40 @ 1
[ 1.010014] ata_piix 0000:00:01.1: version 2.13
[ 1.010959] scsi host0: ata_piix
[ 1.011379] scsi host1: ata_piix
[ 1.011604] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc5a0 irq 14 lpm-pol 0
[ 1.012024] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc5a8 irq 15 lpm-pol 0
[ 1.012470] probe of 0000:00:01.1 returned 0 after 2485 usecs
[ 1.012978] initcall piix_init+0x0/0x40 returned 0 after 2996 usecs
[ 1.013373] calling sis_pci_driver_init+0x0/0x30 @ 1
[ 1.013715] initcall sis_pci_driver_init+0x0/0x30 returned 0 after 12 usecs
[ 1.014145] calling ata_generic_pci_driver_init+0x0/0x30 @ 1
[ 1.014537] initcall ata_generic_pci_driver_init+0x0/0x30 returned 0 after 9 usecs
[ 1.015008] calling blackhole_netdev_init+0x0/0x80 @ 1
[ 1.015358] initcall blackhole_netdev_init+0x0/0x80 returned 0 after 13 usecs
[ 1.015801] calling fixed_mdio_bus_init+0x0/0xe0 @ 1
[ 1.016141] probe of Fixed MDIO bus returned 0 after 3 usecs
[ 1.016549] initcall fixed_mdio_bus_init+0x0/0xe0 returned 0 after 419 usecs
[ 1.016934] calling tun_init+0x0/0xd0 @ 1
[ 1.017202] tun: Universal TUN/TAP device driver, 1.6
[ 1.017643] initcall tun_init+0x0/0xd0 returned 0 after 440 usecs
[ 1.018082] calling ppp_init+0x0/0x120 @ 1
[ 1.018495] PPP generic driver version 2.4.2
[ 1.018844] initcall ppp_init+0x0/0x120 returned 0 after 348 usecs
[ 1.019233] calling netif_init+0x0/0x80 @ 1
[ 1.019514] initcall netif_init+0x0/0x80 returned -19 after 0 usecs
[ 1.019928] calling vfio_init+0x0/0xa0 @ 1
[ 1.020324] VFIO - User Level meta-driver version: 0.3
[ 1.020658] initcall vfio_init+0x0/0xa0 returned 0 after 426 usecs
[ 1.021058] calling vfio_iommu_type1_init+0x0/0x20 @ 1
[ 1.021393] initcall vfio_iommu_type1_init+0x0/0x20 returned 0 after 0 usecs
[ 1.021831] calling vfio_pci_core_init+0x0/0x20 @ 1
[ 1.022158] initcall vfio_pci_core_init+0x0/0x20 returned 0 after 3 usecs
[ 1.022573] calling vfio_pci_init+0x0/0x1c0 @ 1
[ 1.022884] initcall vfio_pci_init+0x0/0x1c0 returned 0 after 12 usecs
[ 1.023288] calling cdrom_init+0x0/0x20 @ 1
[ 1.023553] initcall cdrom_init+0x0/0x20 returned 0 after 5 usecs
[ 1.023887] calling dwc2_platform_driver_init+0x0/0x30 @ 1
[ 1.024202] initcall dwc2_platform_driver_init+0x0/0x30 returned 0 after 8 usecs
[ 1.024601] calling ehci_hcd_init+0x0/0x100 @ 1
[ 1.024867] initcall ehci_hcd_init+0x0/0x100 returned 0 after 4 usecs
[ 1.025232] calling ehci_pci_init+0x0/0x70 @ 1
[ 1.025500] initcall ehci_pci_init+0x0/0x70 returned 0 after 10 usecs
[ 1.025855] calling ehci_platform_init+0x0/0x50 @ 1
[ 1.026142] initcall ehci_platform_init+0x0/0x50 returned 0 after 2 usecs
[ 1.026587] calling ohci_hcd_mod_init+0x0/0x80 @ 1
[ 1.026906] initcall ohci_hcd_mod_init+0x0/0x80 returned 0 after 1 usecs
[ 1.027328] calling ohci_pci_init+0x0/0x70 @ 1
[ 1.027644] initcall ohci_pci_init+0x0/0x70 returned 0 after 8 usecs
[ 1.028044] calling ohci_platform_init+0x0/0x50 @ 1
[ 1.028398] initcall ohci_platform_init+0x0/0x50 returned 0 after 7 usecs
[ 1.028832] calling uhci_hcd_init+0x0/0x140 @ 1
[ 1.029150] initcall uhci_hcd_init+0x0/0x140 returned 0 after 11 usecs
[ 1.029617] calling xhci_hcd_init+0x0/0x40 @ 1
[ 1.029919] initcall xhci_hcd_init+0x0/0x40 returned 0 after 7 usecs
[ 1.030330] calling xhci_pci_init+0x0/0x80 @ 1
[ 1.041991] xhci_hcd 0000:00:04.0: xHCI Host Controller
[ 1.042375] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
[ 1.042954] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[ 1.043805] xhci_hcd 0000:00:04.0: xHCI Host Controller
[ 1.044121] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 1.044530] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
[ 1.044983] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[ 1.045497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.045946] usb usb1: Product: xHCI Host Controller
[ 1.046263] usb usb1: Manufacturer: Linux 6.15.0-rc5+ xhci-hcd
[ 1.046647] usb usb1: SerialNumber: 0000:00:04.0
[ 1.047061] hub 1-0:1.0: USB hub found
[ 1.047347] hub 1-0:1.0: 15 ports detected
[ 1.047842] probe of 1-0:1.0 returned 0 after 783 usecs
[ 1.048152] probe of usb1 returned 0 after 1113 usecs
[ 1.048451] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.048935] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[ 1.049435] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.049876] usb usb2: Product: xHCI Host Controller
[ 1.050189] usb usb2: Manufacturer: Linux 6.15.0-rc5+ xhci-hcd
[ 1.050584] usb usb2: SerialNumber: 0000:00:04.0
[ 1.050947] hub 2-0:1.0: USB hub found
[ 1.051293] hub 2-0:1.0: 15 ports detected
[ 1.052120] probe of 2-0:1.0 returned 0 after 1174 usecs
[ 1.052471] probe of usb2 returned 0 after 1538 usecs
[ 1.052771] probe of 0000:00:04.0 returned 0 after 22135 usecs
[ 1.053110] initcall xhci_pci_init+0x0/0x80 returned 0 after 22481 usecs
[ 1.053484] calling kgdbdbgp_start_thread+0x0/0x70 @ 1
[ 1.053785] initcall kgdbdbgp_start_thread+0x0/0x70 returned 0 after 2 usecs
[ 1.054173] calling i8042_init+0x0/0x750 @ 1
[ 1.054525] probe of 00:01 returned 0 after 9 usecs
[ 1.054810] probe of 00:02 returned 0 after 2 usecs
[ 1.055088] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.055942] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.056229] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.056553] probe of i8042 returned 0 after 1016 usecs
[ 1.056847] initcall i8042_init+0x0/0x750 returned 0 after 2356 usecs
[ 1.057220] calling mousedev_init+0x0/0xa0 @ 1
[ 1.057540] mousedev: PS/2 mouse device common for all mice
[ 1.057857] initcall mousedev_init+0x0/0xa0 returned 0 after 376 usecs
[ 1.058221] calling evdev_init+0x0/0x20 @ 1
[ 1.058547] initcall evdev_init+0x0/0x20 returned 0 after 29 usecs
[ 1.058944] calling atkbd_init+0x0/0x40 @ 1
[ 1.059242] initcall atkbd_init+0x0/0x40 returned 0 after 10 usecs
[ 1.059628] calling elants_i2c_driver_init+0x0/0x30 @ 1
[ 1.060185] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.060730] initcall elants_i2c_driver_init+0x0/0x30 returned 0 after 760 usecs
[ 1.061130] calling uinput_misc_init+0x0/0x20 @ 1
[ 1.061410] probe of serio0 returned 0 after 1436 usecs
[ 1.061847] probe of serio1 returned 19 after 124 usecs
[ 1.062185] initcall uinput_misc_init+0x0/0x20 returned 0 after 781 usecs
[ 1.062606] calling cmos_init+0x0/0x90 @ 1
[ 1.062875] rtc_cmos 00:04: RTC can wake from S4
[ 1.063372] probe of alarmtimer.0.auto returned 0 after 2 usecs
[ 1.063715] rtc_cmos 00:04: registered as rtc0
[ 1.064005] rtc_cmos 00:04: setting system clock to 2025-07-03T01:18:13 UTC (1751505493)
[ 1.064474] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram
[ 1.064837] probe of 00:04 returned 0 after 1967 usecs
[ 1.065139] initcall cmos_init+0x0/0x90 returned 0 after 2272 usecs
[ 1.065869] calling i2c_dev_init+0x0/0xc0 @ 1
[ 1.066161] i2c_dev: i2c /dev entries driver
[ 1.066520] initcall i2c_dev_init+0x0/0xc0 returned 0 after 359 usecs
[ 1.066882] calling restart_poweroff_driver_init+0x0/0x30 @ 1
[ 1.067235] initcall restart_poweroff_driver_init+0x0/0x30 returned 0 after 6 usecs
[ 1.067684] calling thermal_throttle_init_device+0x0/0x60 @ 1
[ 1.068008] initcall thermal_throttle_init_device+0x0/0x60 returned 0 after 0 usecs
[ 1.068587] calling watchdog_gov_noop_register+0x0/0x20 @ 1
[ 1.068998] initcall watchdog_gov_noop_register+0x0/0x20 returned 0 after 4 usecs
[ 1.069484] calling dm_init+0x0/0x90 @ 1
[ 1.069755] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.070505] device-mapper: uevent: version 1.0.3
[ 1.070878] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[ 1.071427] initcall dm_init+0x0/0x90 returned 0 after 1673 usecs
[ 1.071815] calling ghes_edac_init+0x0/0x470 @ 1
[ 1.072122] initcall ghes_edac_init+0x0/0x470 returned -19 after 4 usecs
[ 1.072501] calling amd_pstate_init+0x0/0x330 @ 1
[ 1.072811] initcall amd_pstate_init+0x0/0x330 returned -19 after 1 usecs
[ 1.073235] calling intel_pstate_init+0x0/0x8e0 @ 1
[ 1.073558] intel_pstate: CPU model not supported
[ 1.073866] initcall intel_pstate_init+0x0/0x8e0 returned -19 after 308 usecs
[ 1.074312] calling sysfb_init+0x0/0x110 @ 1
[ 1.074826] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.075211] vesafb: scrolling: redraw
[ 1.075459] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.075831] vesafb: framebuffer at 0xf4000000, mapped to 0x00000000337eb07b, using 1216k, total 1216k
[ 1.076841] Console: switching to colour frame buffer device 80x30
[ 1.077284] fb0: VESA VGA frame buffer device
[ 1.077547] probe of vesa-framebuffer.0 returned 0 after 2728 usecs
[ 1.077945] initcall sysfb_init+0x0/0x110 returned 0 after 3166 usecs
[ 1.078374] calling esrt_sysfs_init+0x0/0x330 @ 1
[ 1.078692] initcall esrt_sysfs_init+0x0/0x330 returned -38 after 0 usecs
[ 1.079120] calling pmc_atom_init+0x0/0x2b0 @ 1
[ 1.079399] initcall pmc_atom_init+0x0/0x2b0 returned -19 after 3 usecs
[ 1.079766] calling rproc_virtio_driver_init+0x0/0x30 @ 1
[ 1.080087] initcall rproc_virtio_driver_init+0x0/0x30 returned 0 after 9 usecs
[ 1.080484] calling vmgenid_plaform_driver_init+0x0/0x30 @ 1
[ 1.080807] initcall vmgenid_plaform_driver_init+0x0/0x30 returned 0 after 3 usecs
[ 1.081212] calling extcon_class_init+0x0/0x60 @ 1
[ 1.081501] initcall extcon_class_init+0x0/0x60 returned 0 after 3 usecs
[ 1.081870] calling binder_init+0x0/0x280 @ 1
[ 1.082209] initcall binder_init+0x0/0x280 returned 0 after 80 usecs
[ 1.082636] calling sock_diag_init+0x0/0x40 @ 1
[ 1.082930] initcall sock_diag_init+0x0/0x40 returned 0 after 11 usecs
[ 1.083296] calling init_net_drop_monitor+0x0/0x120 @ 1
[ 1.083598] drop_monitor: Initializing network drop monitor service
[ 1.083959] initcall init_net_drop_monitor+0x0/0x120 returned 0 after 361 usecs
[ 1.084353] calling blackhole_init+0x0/0x20 @ 1
[ 1.084617] initcall blackhole_init+0x0/0x20 returned 0 after 1 usecs
[ 1.085004] calling gre_offload_init+0x0/0x70 @ 1
[ 1.085447] initcall gre_offload_init+0x0/0x70 returned 0 after 0 usecs
[ 1.085894] calling sysctl_ipv4_init+0x0/0x80 @ 1
[ 1.086251] initcall sysctl_ipv4_init+0x0/0x80 returned 0 after 44 usecs
[ 1.086686] calling cubictcp_register+0x0/0x90 @ 1
[ 1.087014] initcall cubictcp_register+0x0/0x90 returned 0 after 9 usecs
[ 1.087427] calling inet6_init+0x0/0x3f0 @ 1
[ 1.087737] NET: Registered PF_INET6 protocol family
[ 1.092128] Segment Routing with IPv6
[ 1.092402] In-situ OAM (IOAM) with IPv6
[ 1.092676] initcall inet6_init+0x0/0x3f0 returned 0 after 4966 usecs
[ 1.093031] calling packet_init+0x0/0xa0 @ 1
[ 1.093286] NET: Registered PF_PACKET protocol family
[ 1.093570] initcall packet_init+0x0/0xa0 returned 0 after 288 usecs
[ 1.093921] calling strp_dev_init+0x0/0x40 @ 1
[ 1.094365] initcall strp_dev_init+0x0/0x40 returned 0 after 181 usecs
[ 1.094776] calling dcbnl_init+0x0/0x40 @ 1
[ 1.095062] initcall dcbnl_init+0x0/0x40 returned 0 after 3 usecs
[ 1.096084] calling init_dns_resolver+0x0/0x100 @ 1
[ 1.096412] Key type dns_resolver registered
[ 1.096700] initcall init_dns_resolver+0x0/0x100 returned 0 after 293 usecs
[ 1.097143] calling handshake_init+0x0/0xb0 @ 1
[ 1.097462] initcall handshake_init+0x0/0xb0 returned 0 after 13 usecs
[ 1.097871] calling pm_check_save_msr+0x0/0xd0 @ 1
[ 1.098201] initcall pm_check_save_msr+0x0/0xd0 returned 0 after 8 usecs
[ 1.098641] calling mcheck_init_device+0x0/0x160 @ 1
[ 1.099228] initcall mcheck_init_device+0x0/0x160 returned 0 after 254 usecs
[ 1.099638] calling dev_mcelog_init_device+0x0/0x100 @ 1
[ 1.099987] initcall dev_mcelog_init_device+0x0/0x100 returned 0 after 38 usecs
[ 1.100439] calling kernel_do_mounts_initrd_sysctls_init+0x0/0x40 @ 1
[ 1.100817] initcall kernel_do_mounts_initrd_sysctls_init+0x0/0x40 returned 0 after 2 usecs
[ 1.101274] calling tboot_late_init+0x0/0x330 @ 1
[ 1.101579] initcall tboot_late_init+0x0/0x330 returned 0 after 0 usecs
[ 1.102053] calling intel_epb_init+0x0/0xa0 @ 1
[ 1.102442] initcall intel_epb_init+0x0/0xa0 returned -19 after 0 usecs
[ 1.102858] calling mcheck_late_init+0x0/0x90 @ 1
[ 1.103175] initcall mcheck_late_init+0x0/0x90 returned 0 after 5 usecs
[ 1.103610] calling severities_debugfs_init+0x0/0x40 @ 1
[ 1.103959] initcall severities_debugfs_init+0x0/0x40 returned 0 after 0 usecs
[ 1.104426] calling microcode_init+0x0/0x1f0 @ 1
[ 1.104751] initcall microcode_init+0x0/0x1f0 returned -22 after 1 usecs
[ 1.105162] calling resctrl_arch_late_init+0x0/0x5c0 @ 1
[ 1.105506] initcall resctrl_arch_late_init+0x0/0x5c0 returned -19 after 3 usecs
[ 1.105955] calling cpu_init_debugfs+0x0/0xf0 @ 1
[ 1.106280] initcall cpu_init_debugfs+0x0/0xf0 returned 0 after 11 usecs
[ 1.106719] calling sld_mitigate_sysctl_init+0x0/0x40 @ 1
[ 1.107073] initcall sld_mitigate_sysctl_init+0x0/0x40 returned 0 after 2 usecs
[ 1.107528] calling hpet_insert_resource+0x0/0x40 @ 1
[ 1.107857] initcall hpet_insert_resource+0x0/0x40 returned 1 after 2 usecs
[ 1.108283] calling start_sync_check_timer+0x0/0x70 @ 1
[ 1.108621] initcall start_sync_check_timer+0x0/0x70 returned 0 after 1 usecs
[ 1.109060] calling update_mp_table+0x0/0x610 @ 1
[ 1.109367] initcall update_mp_table+0x0/0x610 returned 0 after 0 usecs
[ 1.109776] calling lapic_insert_resource+0x0/0x60 @ 1
[ 1.110113] initcall lapic_insert_resource+0x0/0x60 returned 0 after 1 usecs
[ 1.110556] calling print_ipi_mode+0x0/0x40 @ 1
[ 1.110856] IPI shorthand broadcast: enabled
[ 1.111106] initcall print_ipi_mode+0x0/0x40 returned 0 after 251 usecs
[ 1.111464] calling print_ICs+0x0/0x1e0 @ 1
[ 1.111732] initcall print_ICs+0x0/0x1e0 returned 0 after 1 usecs
[ 1.112136] calling setup_efi_kvm_sev_migration+0x0/0x1c0 @ 1
[ 1.112507] initcall setup_efi_kvm_sev_migration+0x0/0x1c0 returned 0 after 0 usecs
[ 1.112975] calling create_tlb_single_page_flush_ceiling+0x0/0x40 @ 1
[ 1.113384] initcall create_tlb_single_page_flush_ceiling+0x0/0x40 returned 0 after 3 usecs
[ 1.113893] calling pat_memtype_list_init+0x0/0x50 @ 1
[ 1.114230] initcall pat_memtype_list_init+0x0/0x50 returned 0 after 0 usecs
[ 1.114646] calling create_init_pkru_value+0x0/0x50 @ 1
[ 1.114947] initcall create_init_pkru_value+0x0/0x50 returned 0 after 2 usecs
[ 1.115334] calling kernel_panic_sysctls_init+0x0/0x40 @ 1
[ 1.115647] initcall kernel_panic_sysctls_init+0x0/0x40 returned 0 after 2 usecs
[ 1.116047] calling kernel_panic_sysfs_init+0x0/0x30 @ 1
[ 1.116352] initcall kernel_panic_sysfs_init+0x0/0x30 returned 0 after 2 usecs
[ 1.116744] calling kernel_exit_sysctls_init+0x0/0x40 @ 1
[ 1.117060] initcall kernel_exit_sysctls_init+0x0/0x40 returned 0 after 0 usecs
[ 1.117521] calling kernel_exit_sysfs_init+0x0/0x30 @ 1
[ 1.117864] initcall kernel_exit_sysfs_init+0x0/0x30 returned 0 after 1 usecs
[ 1.118313] calling param_sysfs_builtin_init+0x0/0x200 @ 1
[ 1.119895] initcall param_sysfs_builtin_init+0x0/0x200 returned 0 after 1080 usecs
[ 1.120336] calling reboot_ksysfs_init+0x0/0x90 @ 1
[ 1.120634] initcall reboot_ksysfs_init+0x0/0x90 returned 0 after 7 usecs
[ 1.121013] calling sched_core_sysctl_init+0x0/0x40 @ 1
[ 1.121318] initcall sched_core_sysctl_init+0x0/0x40 returned 0 after 2 usecs
[ 1.121713] calling sched_fair_sysctl_init+0x0/0x40 @ 1
[ 1.122053] initcall sched_fair_sysctl_init+0x0/0x40 returned 0 after 1 usecs
[ 1.122507] calling sched_rt_sysctl_init+0x0/0x40 @ 1
[ 1.122844] initcall sched_rt_sysctl_init+0x0/0x40 returned 0 after 1 usecs
[ 1.123279] calling sched_dl_sysctl_init+0x0/0x40 @ 1
[ 1.123581] initcall sched_dl_sysctl_init+0x0/0x40 returned 0 after 0 usecs
[ 1.123960] calling sched_clock_init_late+0x0/0xb0 @ 1
[ 1.124276] sched_clock: Marking stable (1056184827, 66317418)->(1227386922, -104884677)
[ 1.124857] initcall sched_clock_init_late+0x0/0xb0 returned 0 after 581 usecs
[ 1.125306] calling sched_init_debug+0x0/0x330 @ 1
[ 1.126054] initcall sched_init_debug+0x0/0x330 returned 0 after 24 usecs
[ 1.126492] calling cpu_latency_qos_init+0x0/0x60 @ 1
[ 1.126892] initcall cpu_latency_qos_init+0x0/0x60 returned 0 after 66 usecs
[ 1.127332] calling pm_debugfs_init+0x0/0x40 @ 1
[ 1.127622] initcall pm_debugfs_init+0x0/0x40 returned 0 after 0 usecs
[ 1.127983] calling printk_late_init+0x0/0x180 @ 1
[ 1.128284] initcall printk_late_init+0x0/0x180 returned 0 after 5 usecs
[ 1.128671] calling init_srcu_module_notifier+0x0/0x50 @ 1
[ 1.128983] initcall init_srcu_module_notifier+0x0/0x50 returned 0 after 1 usecs
[ 1.129393] calling swiotlb_create_default_debugfs+0x0/0xb0 @ 1
[ 1.129744] initcall swiotlb_create_default_debugfs+0x0/0xb0 returned 0 after 2 usecs
[ 1.130226] calling tk_debug_sleep_time_init+0x0/0x40 @ 1
[ 1.130567] initcall tk_debug_sleep_time_init+0x0/0x40 returned 0 after 0 usecs
[ 1.130980] calling bpf_ksym_iter_register+0x0/0x30 @ 1
[ 1.131276] initcall bpf_ksym_iter_register+0x0/0x30 returned 0 after 0 usecs
[ 1.131659] calling kernel_acct_sysctls_init+0x0/0x40 @ 1
[ 1.131980] initcall kernel_acct_sysctls_init+0x0/0x40 returned 0 after 2 usecs
[ 1.132371] calling kexec_core_sysctl_init+0x0/0x40 @ 1
[ 1.132669] initcall kexec_core_sysctl_init+0x0/0x40 returned 0 after 2 usecs
[ 1.133052] calling bpf_rstat_kfunc_init+0x0/0x30 @ 1
[ 1.133348] initcall bpf_rstat_kfunc_init+0x0/0x30 returned 0 after 1 usecs
[ 1.133756] calling debugfs_kprobe_init+0x0/0x90 @ 1
[ 1.134081] initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 2 usecs
[ 1.134526] calling kernel_delayacct_sysctls_init+0x0/0x40 @ 1
[ 1.135032] initcall kernel_delayacct_sysctls_init+0x0/0x40 returned 0 after 135 usecs
[ 1.135651] calling taskstats_init+0x0/0x50 @ 1
[ 1.135978] registered taskstats version 1
[ 1.136252] initcall taskstats_init+0x0/0x50 returned 0 after 282 usecs
[ 1.136659] calling ftrace_sysctl_init+0x0/0x30 @ 1
[ 1.136982] initcall ftrace_sysctl_init+0x0/0x30 returned 0 after 2 usecs
[ 1.137403] calling init_hwlat_tracer+0x0/0x130 @ 1
[ 1.137966] initcall init_hwlat_tracer+0x0/0x130 returned 0 after 243 usecs
[ 1.138437] calling bpf_key_sig_kfuncs_init+0x0/0x20 @ 1
[ 1.138787] initcall bpf_key_sig_kfuncs_init+0x0/0x20 returned 0 after 3 usecs
[ 1.139240] calling bpf_kprobe_multi_kfuncs_init+0x0/0x20 @ 1
[ 1.139622] initcall bpf_kprobe_multi_kfuncs_init+0x0/0x20 returned 0 after 1 usecs
[ 1.140057] calling kdb_ftrace_register+0x0/0x20 @ 1
[ 1.140346] initcall kdb_ftrace_register+0x0/0x20 returned 0 after 3 usecs
[ 1.140717] calling bpf_global_ma_init+0x0/0x30 @ 1
[ 1.141019] initcall bpf_global_ma_init+0x0/0x30 returned 0 after 23 usecs
[ 1.141393] calling bpf_syscall_sysctl_init+0x0/0x40 @ 1
[ 1.141695] initcall bpf_syscall_sysctl_init+0x0/0x40 returned 0 after 2 usecs
[ 1.142083] calling unbound_reg_init+0x0/0x30 @ 1
[ 1.142370] initcall unbound_reg_init+0x0/0x30 returned 0 after 3 usecs
[ 1.142779] calling kfunc_init+0x0/0x100 @ 1
[ 1.143063] initcall kfunc_init+0x0/0x100 returned 0 after 1 usecs
[ 1.143401] calling bpf_map_iter_init+0x0/0x50 @ 1
[ 1.143676] initcall bpf_map_iter_init+0x0/0x50 returned 0 after 0 usecs
[ 1.144038] calling init_subsystem+0x0/0x30 @ 1
[ 1.144311] initcall init_subsystem+0x0/0x30 returned 0 after 1 usecs
[ 1.144660] calling task_iter_init+0x0/0xe0 @ 1
[ 1.144924] initcall task_iter_init+0x0/0xe0 returned 0 after 1 usecs
[ 1.145274] calling bpf_prog_iter_init+0x0/0x30 @ 1
[ 1.145556] initcall bpf_prog_iter_init+0x0/0x30 returned 0 after 0 usecs
[ 1.145923] calling bpf_link_iter_init+0x0/0x30 @ 1
[ 1.146204] initcall bpf_link_iter_init+0x0/0x30 returned 0 after 0 usecs
[ 1.146609] calling init_trampolines+0x0/0x30 @ 1
[ 1.146918] initcall init_trampolines+0x0/0x30 returned 0 after 2 usecs
[ 1.147329] calling rqspinlock_register_kfuncs+0x0/0x30 @ 1
[ 1.147695] initcall rqspinlock_register_kfuncs+0x0/0x30 returned 0 after 0 usecs
[ 1.148150] calling kfunc_init+0x0/0x30 @ 1
[ 1.148432] initcall kfunc_init+0x0/0x30 returned 0 after 0 usecs
[ 1.148810] calling bpf_cgroup_iter_init+0x0/0x30 @ 1
[ 1.149137] initcall bpf_cgroup_iter_init+0x0/0x30 returned 0 after 0 usecs
[ 1.149570] calling cpumask_kfunc_init+0x0/0xb0 @ 1
[ 1.149852] initcall cpumask_kfunc_init+0x0/0xb0 returned 0 after 2 usecs
[ 1.150219] calling crypto_kfunc_init+0x0/0xb0 @ 1
[ 1.150531] initcall crypto_kfunc_init+0x0/0xb0 returned 0 after 0 usecs
[ 1.150948] calling bpf_kmem_cache_iter_init+0x0/0x30 @ 1
[ 1.151272] initcall bpf_kmem_cache_iter_init+0x0/0x30 returned 0 after 0 usecs
[ 1.151668] calling load_system_certificate_list+0x0/0x40 @ 1
[ 1.152133] Loading compiled-in X.509 certificates
[ 1.152980] Loaded X.509 cert 'Build time autogenerated kernel key: 63dcfa1705afed8feebbcaee12f1a32f27ca64ce'
[ 1.153510] initcall load_system_certificate_list+0x0/0x40 returned 0 after 1377 usecs
[ 1.153986] calling vmstat_late_init+0x0/0x30 @ 1
[ 1.154352] initcall vmstat_late_init+0x0/0x30 returned 0 after 0 usecs
[ 1.154773] calling fault_around_debugfs+0x0/0x40 @ 1
[ 1.155131] initcall fault_around_debugfs+0x0/0x40 returned 0 after 27 usecs
[ 1.155918] calling slab_sysfs_init+0x0/0x110 @ 1
[ 1.157231] initcall slab_sysfs_init+0x0/0x110 returned 0 after 1041 usecs
[ 1.157657] calling max_swapfiles_check+0x0/0x20 @ 1
[ 1.157981] initcall max_swapfiles_check+0x0/0x20 returned 0 after 0 usecs
[ 1.158430] calling zswap_init+0x0/0x30 @ 1
[ 1.158732] initcall zswap_init+0x0/0x30 returned 0 after 0 usecs
[ 1.159115] calling hugetlb_vmemmap_init+0x0/0x90 @ 1
[ 1.159458] initcall hugetlb_vmemmap_init+0x0/0x90 returned 0 after 9 usecs
[ 1.159887] calling mempolicy_sysfs_init+0x0/0x2b0 @ 1
[ 1.160240] initcall mempolicy_sysfs_init+0x0/0x2b0 returned 0 after 3 usecs
[ 1.160649] calling memory_tier_late_init+0x0/0xc0 @ 1
[ 1.160972] Demotion targets for Node 0: null
[ 1.161225] initcall memory_tier_late_init+0x0/0xc0 returned 0 after 280 usecs
[ 1.161621] calling split_huge_pages_debugfs+0x0/0x40 @ 1
[ 1.161927] initcall split_huge_pages_debugfs+0x0/0x40 returned 0 after 2 usecs
[ 1.162331] calling check_early_ioremap_leak+0x0/0x60 @ 1
[ 1.162682] initcall check_early_ioremap_leak+0x0/0x60 returned 0 after 2 usecs
[ 1.163129] calling set_hardened_usercopy+0x0/0x40 @ 1
[ 1.163465] initcall set_hardened_usercopy+0x0/0x40 returned 1 after 2 usecs
[ 1.163872] calling mg_debugfs_init+0x0/0x40 @ 1
[ 1.164143] initcall mg_debugfs_init+0x0/0x40 returned 0 after 1 usecs
[ 1.164502] calling fscrypt_init+0x0/0xf0 @ 1
[ 1.164974] Key type .fscrypt registered
[ 1.165213] Key type fscrypt-provisioning registered
[ 1.165536] initcall fscrypt_init+0x0/0xf0 returned 0 after 777 usecs
[ 1.165944] calling pstore_init+0x0/0x40 @ 1
[ 1.166234] initcall pstore_init+0x0/0x40 returned 0 after 5 usecs
[ 1.166620] calling init_root_keyring+0x0/0x20 @ 1
[ 1.166911] initcall init_root_keyring+0x0/0x20 returned 0 after 7 usecs
[ 1.167281] calling init_trusted+0x0/0x1c0 @ 1
[ 1.167548] initcall init_trusted+0x0/0x1c0 returned 0 after 5 usecs
[ 1.167897] calling init_encrypted+0x0/0x100 @ 1
[ 1.170835] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[ 1.171202] ata1.00: 83886080 sectors, multi 16: LBA48
[ 1.171538] ata1.01: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[ 1.171916] ata1.01: 104857600 sectors, multi 16: LBA48
[ 1.172939] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 1.172952] calling cryptd_init+0x0/0xff0 [cryptd] @ 103
[ 1.173519] probe of 0:0:0:0 returned 19 after 6 usecs
[ 1.174191] cryptd: max_cpu_qlen set to 1000
[ 1.174205] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.174502] initcall cryptd_init+0x0/0xff0 [cryptd] returned 0 after 709 usecs
[ 1.174877] sd 0:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[ 1.175780] sd 0:0:0:0: [sda] Write Protect is off
[ 1.176093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.176442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.176934] scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 1.177382] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.177819] probe of 0:0:1:0 returned 19 after 2 usecs
[ 1.178256] sd 0:0:1:0: [sdb] 104857600 512-byte logical blocks: (53.7 GB/50.0 GiB)
[ 1.178267] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.178776] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.179407] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.179956] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.180455] sd 0:0:1:0: [sdb] Preferred minimum I/O size 512 bytes
[ 1.202968] sda: sda1 sda2
[ 1.204067] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.204890] probe of 0:0:0:0 returned 0 after 30717 usecs
[ 1.208114] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.208938] probe of 0:0:1:0 returned 0 after 30731 usecs
[ 1.214711] calling aesni_init+0x0/0xff0 [aesni_intel] @ 103
[ 1.216324] initcall aesni_init+0x0/0xff0 [aesni_intel] returned 0 after 122 usecs
[ 1.231674] Key type encrypted registered
[ 1.232180] initcall init_encrypted+0x0/0x100 returned 0 after 15979 usecs
[ 1.232931] calling init_profile_hash+0x0/0xa0 @ 1
[ 1.233387] initcall init_profile_hash+0x0/0xa0 returned 0 after 0 usecs
[ 1.233983] calling integrity_fs_init+0x0/0x70 @ 1
[ 1.234468] initcall integrity_fs_init+0x0/0x70 returned 0 after 5 usecs
[ 1.235129] calling init_ima+0x0/0xf0 @ 1
[ 1.235533] ima: No TPM chip found, activating TPM-bypass!
[ 1.236124] ima: Allocated hash algorithm: sha1
[ 1.236682] ima: No architecture policies found
[ 1.237250] initcall init_ima+0x0/0xf0 returned 0 after 1730 usecs
[ 1.237960] calling init_evm+0x0/0x140 @ 1
[ 1.238496] evm: Initialising EVM extended attributes:
[ 1.239360] evm: security.selinux
[ 1.239897] evm: security.SMACK64 (disabled)
[ 1.240574] evm: security.SMACK64EXEC (disabled)
[ 1.241282] evm: security.SMACK64TRANSMUTE (disabled)
[ 1.241971] evm: security.SMACK64MMAP (disabled)
[ 1.242592] evm: security.apparmor
[ 1.243061] evm: security.ima
[ 1.243483] evm: security.capability
[ 1.243965] evm: HMAC attrs: 0x1
[ 1.244417] initcall init_evm+0x0/0x140 returned 0 after 5921 usecs
[ 1.245048] calling crypto_algapi_init+0x0/0x20 @ 1
[ 1.246029] initcall crypto_algapi_init+0x0/0x20 returned 0 after 6 usecs
[ 1.246692] calling blk_timeout_init+0x0/0x20 @ 1
[ 1.247177] initcall blk_timeout_init+0x0/0x20 returned 0 after 0 usecs
[ 1.247798] calling sed_opal_init+0x0/0xa0 @ 1
[ 1.248170] initcall sed_opal_init+0x0/0xa0 returned 0 after 10 usecs
[ 1.248667] calling init_error_injection+0x0/0x80 @ 1
[ 1.249287] initcall init_error_injection+0x0/0x80 returned 0 after 213 usecs
[ 1.249833] calling depot_debugfs_init+0x0/0x50 @ 1
[ 1.250239] initcall depot_debugfs_init+0x0/0x50 returned 0 after 2 usecs
[ 1.250761] calling pci_resource_alignment_sysfs_init+0x0/0x30 @ 1
[ 1.251160] initcall pci_resource_alignment_sysfs_init+0x0/0x30 returned 0 after 4 usecs
[ 1.251692] calling pci_sysfs_init+0x0/0xb0 @ 1
[ 1.252072] initcall pci_sysfs_init+0x0/0xb0 returned 0 after 57 usecs
[ 1.252484] calling bert_init+0x0/0x2c0 @ 1
[ 1.252772] initcall bert_init+0x0/0x2c0 returned 0 after 3 usecs
[ 1.253158] calling clk_debug_init+0x0/0x130 @ 1
[ 1.253470] initcall clk_debug_init+0x0/0x130 returned 0 after 5 usecs
[ 1.253876] calling genpd_debug_init+0x0/0x80 @ 1
[ 1.254188] initcall genpd_debug_init+0x0/0x80 returned 0 after 1 usecs
[ 1.254610] calling setup_vcpu_hotplug_event+0x0/0x40 @ 1
[ 1.254968] initcall setup_vcpu_hotplug_event+0x0/0x40 returned -19 after 0 usecs
[ 1.255423] calling boot_wait_for_devices+0x0/0x40 @ 1
[ 1.255757] initcall boot_wait_for_devices+0x0/0x40 returned -19 after 2 usecs
[ 1.256197] calling dmar_free_unused_resources+0x0/0xd0 @ 1
[ 1.256557] initcall dmar_free_unused_resources+0x0/0xd0 returned 0 after 3 usecs
[ 1.257012] calling sync_state_resume_initcall+0x0/0x20 @ 1
[ 1.257370] initcall sync_state_resume_initcall+0x0/0x20 returned 0 after 0 usecs
[ 1.257825] calling deferred_probe_initcall+0x0/0xa0 @ 1
[ 1.258179] initcall deferred_probe_initcall+0x0/0xa0 returned 0 after 11 usecs
[ 1.258646] calling late_resume_init+0x0/0x1b0 @ 1
[ 1.258961] PM: Magic number: 1:604:305
[ 1.259265] tty tty34: hash matches
[ 1.259530] initcall late_resume_init+0x0/0x1b0 returned 0 after 568 usecs
[ 1.259953] calling sync_debugfs_init+0x0/0x70 @ 1
[ 1.260278] initcall sync_debugfs_init+0x0/0x70 returned 0 after 7 usecs
[ 1.260692] calling charger_manager_init+0x0/0xb0 @ 1
[ 1.261225] initcall charger_manager_init+0x0/0xb0 returned 0 after 243 usecs
[ 1.261674] calling dm_init_init+0x0/0x780 @ 1
[ 1.261971] initcall dm_init_init+0x0/0x780 returned 0 after 0 usecs
[ 1.262392] calling acpi_cpufreq_init+0x0/0x30 @ 1
[ 1.262737] initcall acpi_cpufreq_init+0x0/0x30 returned -19 after 10 usecs
[ 1.263197] calling powernowk8_init+0x0/0x1e0 @ 1
[ 1.263523] initcall powernowk8_init+0x0/0x1e0 returned -19 after 2 usecs
[ 1.263950] calling pcc_cpufreq_init+0x0/0x30 @ 1
[ 1.264264] initcall pcc_cpufreq_init+0x0/0x30 returned -19 after 5 usecs
[ 1.264686] calling centrino_init+0x0/0x40 @ 1
[ 1.264983] initcall centrino_init+0x0/0x40 returned -19 after 0 usecs
[ 1.265393] calling edd_init+0x0/0x320 @ 1
[ 1.265674] initcall edd_init+0x0/0x320 returned -19 after 1 usecs
[ 1.266063] calling firmware_memmap_init+0x0/0x50 @ 1
[ 1.266446] initcall firmware_memmap_init+0x0/0x50 returned 0 after 16 usecs
[ 1.266907] calling register_update_efi_random_seed+0x0/0x30 @ 1
[ 1.267288] initcall register_update_efi_random_seed+0x0/0x30 returned 0 after 0 usecs
[ 1.267725] calling efi_shutdown_init+0x0/0x60 @ 1
[ 1.268008] initcall efi_shutdown_init+0x0/0x60 returned -19 after 1 usecs
[ 1.268475] calling efi_rci2_sysfs_init+0x0/0x2c0 @ 1
[ 1.268807] initcall efi_rci2_sysfs_init+0x0/0x2c0 returned 0 after 0 usecs
[ 1.269238] calling efi_earlycon_unmap_fb+0x0/0x50 @ 1
[ 1.269578] initcall efi_earlycon_unmap_fb+0x0/0x50 returned 0 after 0 usecs
[ 1.270014] calling itmt_legacy_init+0x0/0x60 @ 1
[ 1.270337] initcall itmt_legacy_init+0x0/0x60 returned -19 after 0 usecs
[ 1.270762] calling cec_init+0x0/0x1e0 @ 1
[ 1.271047] RAS: Correctable Errors collector initialized.
[ 1.271398] initcall cec_init+0x0/0x1e0 returned 0 after 359 usecs
[ 1.271791] calling bpf_kfunc_init+0x0/0x170 @ 1
[ 1.272118] initcall bpf_kfunc_init+0x0/0x170 returned 0 after 3 usecs
[ 1.272531] calling init_subsystem+0x0/0x30 @ 1
[ 1.272844] initcall init_subsystem+0x0/0x30 returned 0 after 2 usecs
[ 1.273251] calling xdp_metadata_init+0x0/0x30 @ 1
[ 1.273573] initcall xdp_metadata_init+0x0/0x30 returned 0 after 0 usecs
[ 1.273995] calling bpf_sockmap_iter_init+0x0/0x30 @ 1
[ 1.274347] initcall bpf_sockmap_iter_init+0x0/0x30 returned 0 after 0 usecs
[ 1.274797] calling bpf_sk_storage_map_iter_init+0x0/0x30 @ 1
[ 1.275168] initcall bpf_sk_storage_map_iter_init+0x0/0x30 returned 0 after 0 usecs
[ 1.275931] calling bpf_prog_test_run_init+0x0/0xb0 @ 1
[ 1.276276] initcall bpf_prog_test_run_init+0x0/0xb0 returned 0 after 0 usecs
[ 1.276721] calling bpf_dummy_struct_ops_init+0x0/0x20 @ 1
[ 1.277083] initcall bpf_dummy_struct_ops_init+0x0/0x20 returned 0 after 0 usecs
[ 1.277545] calling tcp_congestion_default+0x0/0x30 @ 1
[ 1.277894] initcall tcp_congestion_default+0x0/0x30 returned 0 after 5 usecs
[ 1.278369] calling inet_blackhole_dev_init+0x0/0x40 @ 1
[ 1.278927] initcall inet_blackhole_dev_init+0x0/0x40 returned 0 after 4 usecs
[ 1.279436] calling tcp_bpf_v4_build_proto+0x0/0xa0 @ 1
[ 1.279781] initcall tcp_bpf_v4_build_proto+0x0/0xa0 returned 0 after 2 usecs
[ 1.280224] calling udp_bpf_v4_build_proto+0x0/0x50 @ 1
[ 1.280565] initcall udp_bpf_v4_build_proto+0x0/0x50 returned 0 after 0 usecs
[ 1.281010] calling bpf_tcp_ca_kfunc_init+0x0/0x40 @ 1
[ 1.281346] initcall bpf_tcp_ca_kfunc_init+0x0/0x40 returned 0 after 0 usecs
[ 1.281783] calling pci_mmcfg_late_insert_resources+0x0/0xd0 @ 1
[ 1.282169] initcall pci_mmcfg_late_insert_resources+0x0/0xd0 returned 0 after 0 usecs
[ 1.282689] calling software_resume_initcall+0x0/0x190 @ 1
[ 1.283053] initcall software_resume_initcall+0x0/0x190 returned -2 after 3 usecs
[ 1.283518] calling lockup_detector_check+0x0/0x80 @ 1
[ 1.283877] initcall lockup_detector_check+0x0/0x80 returned 0 after 9 usecs
[ 1.284317] calling ftrace_check_sync+0x0/0x30 @ 1
[ 1.284612] initcall ftrace_check_sync+0x0/0x30 returned 0 after 8 usecs
[ 1.285146] calling latency_fsnotify_init+0x0/0x50 @ 1
[ 1.285513] initcall latency_fsnotify_init+0x0/0x50 returned 0 after 9 usecs
[ 1.285957] calling trace_eval_sync+0x0/0x30 @ 1
[ 1.286283] initcall trace_eval_sync+0x0/0x30 returned 0 after 6 usecs
[ 1.286720] calling late_trace_init+0x0/0xe0 @ 1
[ 1.287032] initcall late_trace_init+0x0/0xe0 returned 0 after 0 usecs
[ 1.287437] calling acpi_gpio_handle_deferred_request_irqs+0x0/0xa0 @ 1
[ 1.287851] initcall acpi_gpio_handle_deferred_request_irqs+0x0/0xa0 returned 0 after 0 usecs
[ 1.288368] calling clk_disable_unused+0x0/0x190 @ 1
[ 1.288692] clk: Disabling unused clocks
[ 1.288978] initcall clk_disable_unused+0x0/0x190 returned 0 after 286 usecs
[ 1.289415] calling genpd_power_off_unused+0x0/0xa0 @ 1
[ 1.289757] PM: genpd: Disabling unused power domains
[ 1.290079] initcall genpd_power_off_unused+0x0/0xa0 returned 0 after 322 usecs
[ 1.290545] calling balloon_wait_finish+0x0/0x110 @ 1
[ 1.290881] initcall balloon_wait_finish+0x0/0x110 returned -19 after 0 usecs
[ 1.291320] calling regulator_init_complete+0x0/0x40 @ 1
[ 1.291666] initcall regulator_init_complete+0x0/0x40 returned 0 after 2 usecs
[ 1.298286] Freeing unused decrypted memory: 2028K
[ 1.300046] Freeing unused kernel image (initmem) memory: 4692K
[ 1.300359] Write protecting the kernel read-only data: 26624k
[ 1.301011] Freeing unused kernel image (text/rodata gap) memory: 548K
[ 1.301567] Freeing unused kernel image (rodata/data gap) memory: 440K
[ 1.308795] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.309043] Run /init as init process
[ 1.309191] with arguments:
[ 1.309317] /init
[ 1.309421] splash
[ 1.309528] with environment:
[ 1.309659] HOME=/
[ 1.309766] TERM=linux
[ 1.309894] BOOT_IMAGE=/vmlinuz-6.15.0-rc5+
[ 1.340163] calling mac_hid_init+0x0/0xff0 [mac_hid] @ 141
[ 1.340423] initcall mac_hid_init+0x0/0xff0 [mac_hid] returned 0 after 3 usecs
[ 1.341448] calling pacpi_pci_driver_init+0x0/0xff0 [pata_acpi] @ 154
[ 1.341743] initcall pacpi_pci_driver_init+0x0/0xff0 [pata_acpi] returned 0 after 13 usecs
[ 1.347296] calling serio_raw_drv_init+0x0/0xff0 [serio_raw] @ 159
[ 1.348531] initcall serio_raw_drv_init+0x0/0xff0 [serio_raw] returned 0 after 940 usecs
[ 1.349233] calling floppy_module_init+0x0/0x1e40 [floppy] @ 151
[ 1.351329] calling input_leds_init+0x0/0xff0 [input_leds] @ 158
[ 1.353697] calling psmouse_init+0x0/0xa0 [psmouse] @ 159
[ 1.354311] initcall psmouse_init+0x0/0xa0 [psmouse] returned 0 after 244 usecs
[ 1.355192] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4
[ 1.363378] calling drm_core_init+0x0/0xb0 [drm] @ 149
[ 1.363730] ACPI: bus type drm_connector registered
[ 1.364133] initcall drm_core_init+0x0/0xb0 [drm] returned 0 after 416 usecs
[ 1.366827] FDC 0 is a S82078B
[ 1.367117] initcall floppy_module_init+0x0/0x1e40 [floppy] returned 0 after 3400 usecs
[ 1.375970] calling qxl_pci_driver_init+0x0/0xff0 [qxl] @ 149
[ 1.387572] Console: switching to colour dummy device 80x25
[ 1.387839] qxl 0000:00:02.0: vgaarb: deactivate vga console
[ 1.388137] [drm] Device Version 0.0
[ 1.388306] [drm] Compression level 0 log level 0
[ 1.388510] [drm] 12286 io pages at offset 0x1000000
[ 1.388726] [drm] 16777216 byte draw area at offset 0x0
[ 1.388952] [drm] RAM header offset: 0x3ffe000
[ 1.389211] [drm] qxl: 16M of VRAM memory size
[ 1.389415] [drm] qxl: 63M of IO pages memory ready (VRAM domain)
[ 1.389672] [drm] qxl: 64M of Surface memory size
[ 1.390777] [drm] slot 0 (main): base 0xf4000000, size 0x03ffe000
[ 1.391099] [drm] slot 1 (surfaces): base 0xf8000000, size 0x04000000
[ 1.391652] [drm] Initialized qxl 0.1.0 for 0000:00:02.0 on minor 0
[ 1.392373] fbcon: qxldrmfb (fb0) is primary device
[ 1.394176] Console: switching to colour frame buffer device 128x48
[ 1.400362] qxl 0000:00:02.0: [drm] fb0: qxldrmfb frame buffer device
[ 1.406367] initcall input_leds_init+0x0/0xff0 [input_leds] returned 0 after 30135 usecs
[ 1.407278] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[ 1.408371] probe of serio1 returned 0 after 53567 usecs
[ 1.417809] probe of 0000:00:02.0 returned 0 after 41566 usecs
[ 1.418261] initcall qxl_pci_driver_init+0x0/0xff0 [qxl] returned 0 after 42031 usecs
[ 1.461348] calling linear_init+0x0/0xff0 [linear] @ 191
[ 1.461602] initcall linear_init+0x0/0xff0 [linear] returned 0 after 5 usecs
[ 1.535642] EXT4-fs (sda2): mounted filesystem 3516f70c-4dd9-4b0f-bac4-c41778d09bbb ro with ordered data mode. Quota mode: none.
[ 1.568736] EXT4-fs (sda2): re-mounted 3516f70c-4dd9-4b0f-bac4-c41778d09bbb r/w.
[ 1.585433] EXT4-fs (sda2): re-mounted 3516f70c-4dd9-4b0f-bac4-c41778d09bbb.
[ 1.708722] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[ 1.723899] calling init_autofs_fs+0x0/0x40 [autofs4] @ 1
[ 1.724205] initcall init_autofs_fs+0x0/0x40 [autofs4] returned 0 after 58 usecs
[ 1.724647] systemd[1]: Inserted module 'autofs4'
[ 1.727674] calling xt_init+0x0/0xff0 [x_tables] @ 1
[ 1.727909] initcall xt_init+0x0/0xff0 [x_tables] returned 0 after 2 usecs
[ 1.729963] calling ip_tables_init+0x0/0xff0 [ip_tables] @ 1
[ 1.730225] initcall ip_tables_init+0x0/0xff0 [ip_tables] returned 0 after 7 usecs
[ 1.736990] systemd[1]: systemd 245.4-4kylin3.11k30 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1.737875] systemd[1]: Detected virtualization kvm.
[ 1.738092] systemd[1]: Detected architecture x86-64.
[ 1.738370] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info
[ 1.758990] systemd[1]: Set hostname to <standardpc>.
[ 1.879764] systemd[1]: Configuration file /lib/systemd/system/vdi_usbmagicd.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 1.880569] systemd[1]: Configuration file /lib/systemd/system/vdi_usbipd.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 1.881354] systemd[1]: Configuration file /lib/systemd/system/vdi_super_agent.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 1.888076] systemd[1]: Configuration file /etc/systemd/system/runsunloginclient.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 1.921743] systemd[1]: Created slice system-modprobe.slice.
[ 1.922091] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 1.922448] systemd[1]: Created slice User and Session Slice.
[ 1.922726] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.923139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.923543] systemd[1]: Reached target User and Group Name Lookups.
[ 1.923811] systemd[1]: Reached target Remote File Systems.
[ 1.924052] systemd[1]: Reached target Slices.
[ 1.924255] systemd[1]: Reached target Swap.
[ 1.924488] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.924813] systemd[1]: Listening on LVM2 poll daemon socket.
[ 1.925090] systemd[1]: Listening on Syslog Socket.
[ 1.925950] systemd[1]: Listening on Process Core Dump Socket.
[ 1.926248] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 1.926570] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 1.927964] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 1.928351] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.928664] systemd[1]: Listening on Journal Socket.
[ 1.928924] systemd[1]: Listening on udev Control Socket.
[ 1.929202] systemd[1]: Listening on udev Kernel Socket.
[ 1.946647] systemd[1]: Mounting Huge Pages File System...
[ 1.948302] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.950275] systemd[1]: Mounting Kernel Debug File System...
[ 1.951567] systemd[1]: Mounting Kernel Trace File System...
[ 1.952868] systemd[1]: Starting Journal Service...
[ 1.953806] systemd[1]: Starting Availability of block devices...
[ 1.954876] systemd[1]: Starting Set the console keyboard layout...
[ 1.956167] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1.957765] systemd[1]: Starting update duration after shutdown or reboot...
[ 1.959068] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 1.959793] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 1.961260] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 1.961806] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 1.963882] systemd[1]: Starting Load Kernel Modules...
[ 1.967371] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.968331] systemd[1]: Starting udev Coldplug all Devices...
[ 1.969373] systemd[1]: Starting Uncomplicated firewall...
[ 1.970959] systemd[1]: Mounted Huge Pages File System.
[ 1.971536] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.972137] systemd[1]: Mounted Kernel Debug File System.
[ 1.972672] systemd[1]: Mounted Kernel Trace File System.
[ 1.973390] systemd[1]: Finished Availability of block devices.
[ 1.975688] calling parport_default_proc_register+0x0/0xff0 [parport] @ 349
[ 1.976172] initcall parport_default_proc_register+0x0/0xff0 [parport] returned 0 after 21 usecs
[ 1.976623] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1.977626] systemd[1]: Finished update duration after shutdown or reboot.
[ 1.980175] systemd[1]: Finished Uncomplicated firewall.
[ 1.983864] calling lp_init_module+0x0/0xff0 [lp] @ 349
[ 1.985422] lp: driver loaded but no devices found
[ 1.985642] initcall lp_init_module+0x0/0xff0 [lp] returned 0 after 1538 usecs
[ 1.987338] calling ppdev_init+0x0/0xff0 [ppdev] @ 349
[ 1.990382] ppdev: user-space parallel port driver
[ 1.990619] initcall ppdev_init+0x0/0xff0 [ppdev] returned 0 after 2890 usecs
[ 1.993147] calling parport_pc_init+0x0/0xef0 [parport_pc] @ 349
[ 1.993480] probe of parport_pc.956 returned 0 after 17 usecs
[ 1.993738] probe of parport0 returned 19 after 2 usecs
[ 1.993962] probe of parport0 returned 19 after 1 usecs
[ 1.994241] probe of parport_pc.888 returned 0 after 5 usecs
[ 1.994486] EXT4-fs (sda2): re-mounted 3516f70c-4dd9-4b0f-bac4-c41778d09bbb.
[ 1.994838] probe of parport0 returned 19 after 3 usecs
[ 1.995080] probe of parport0 returned 19 after 1 usecs
[ 1.995375] probe of parport_pc.632 returned 0 after 5 usecs
[ 1.995631] probe of parport0 returned 19 after 1 usecs
[ 1.995859] probe of parport0 returned 19 after 2 usecs
[ 1.996150] initcall parport_pc_init+0x0/0xef0 [parport_pc] returned 0 after 2737 usecs
[ 1.999435] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.000707] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.001280] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 2.002604] systemd[1]: Starting Load/Save Random Seed...
[ 2.003713] systemd[1]: Starting Create System Users...
[ 2.004498] systemd[1]: Started Journal Service.
[ 2.012332] calling vmw_pci_driver_init+0x0/0xff0 [vmwgfx] @ 349
[ 2.012769] initcall vmw_pci_driver_init+0x0/0xff0 [vmwgfx] returned 0 after 36 usecs
[ 2.022268] calling usbip_core_init+0x0/0xff0 [usbip_core] @ 349
[ 2.022782] initcall usbip_core_init+0x0/0xff0 [usbip_core] returned 0 after 184 usecs
[ 2.027026] calling vhci_hcd_init+0x0/0xff0 [vhci_hcd] @ 349
[ 2.027483] probe of vhci_hcd.0 returned 0 after 10 usecs
[ 2.027924] [vhci_hcd_init][1523]vhcis[i].fdev=00000000fb27dfbe-----------------ginnie---------------
[ 2.028565] [vhci_hcd_init][1531]dev->driver=0000000014cab830-----------------ginnie---------------
[ 2.029131] [vhci_hcd_probe][1345]fdev=00000000fb27dfbe-----------------ginnie---------------
[ 2.029629] faux_driver vhci_hcd.0: USB/IP Virtual Host Controller
[ 2.030063] faux_driver vhci_hcd.0: new USB bus registered, assigned bus number 3
[ 2.030591] vhci_hcd: created sysfs vhci_hcd.0
[ 2.030920] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[ 2.031421] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.031734] usb usb3: Product: USB/IP Virtual Host Controller
[ 2.032121] usb usb3: Manufacturer: Linux 6.15.0-rc5+ vhci_hcd
[ 2.032509] usb usb3: SerialNumber: vhci_hcd.0
[ 2.032934] hub 3-0:1.0: USB hub found
[ 2.033211] hub 3-0:1.0: 8 ports detected
[ 2.033630] probe of 3-0:1.0 returned 0 after 702 usecs
[ 2.034026] probe of usb3 returned 0 after 1130 usecs
[ 2.034479] faux_driver vhci_hcd.0: USB/IP Virtual Host Controller
[ 2.035107] faux_driver vhci_hcd.0: new USB bus registered, assigned bus number 4
[ 2.035780] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.036404] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[ 2.036936] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.037300] usb usb4: Product: USB/IP Virtual Host Controller
[ 2.037589] usb usb4: Manufacturer: Linux 6.15.0-rc5+ vhci_hcd
[ 2.037882] usb usb4: SerialNumber: vhci_hcd.0
[ 2.038249] hub 4-0:1.0: USB hub found
[ 2.038501] hub 4-0:1.0: 8 ports detected
[ 2.038886] probe of 4-0:1.0 returned 0 after 642 usecs
[ 2.039160] probe of usb4 returned 0 after 938 usecs
[ 2.039456] [vhci_hcd_init][1533]dev->driver=0000000014cab830-----------------ginnie---------------
[ 2.039911] initcall vhci_hcd_init+0x0/0xff0 [vhci_hcd] returned 0 after 12461 usecs
[ 2.065883] calling fq_codel_module_init+0x0/0xff0 [sch_fq_codel] @ 375
[ 2.066252] initcall fq_codel_module_init+0x0/0xff0 [sch_fq_codel] returned 0 after 1 usecs
[ 2.179093] calling smbalert_driver_init+0x0/0xff0 [i2c_smbus] @ 390
[ 2.179550] initcall smbalert_driver_init+0x0/0xff0 [i2c_smbus] returned 0 after 26 usecs
[ 2.182968] calling piix4_driver_init+0x0/0xff0 [i2c_piix4] @ 390
[ 2.184163] calling init_soundcore+0x0/0xff0 [soundcore] @ 377
[ 2.184420] initcall init_soundcore+0x0/0xff0 [soundcore] returned 0 after 6 usecs
[ 2.185038] calling fw_cfg_sysfs_init+0x0/0xff0 [qemu_fw_cfg] @ 388
[ 2.185072] calling virtio_input_driver_init+0x0/0xff0 [virtio_input] @ 386
[ 2.185814] probe of QEMU0002:00 returned 0 after 487 usecs
[ 2.186130] initcall fw_cfg_sysfs_init+0x0/0xff0 [qemu_fw_cfg] returned 0 after 386 usecs
[ 2.186801] calling failover_init+0x0/0xff0 [failover] @ 398
[ 2.186837] input: QEMU Virtio Tablet as /devices/pci0000:00/0000:00:06.0/virtio1/input/input5
[ 2.187060] initcall failover_init+0x0/0xff0 [failover] returned 0 after 5 usecs
[ 2.187896] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 2.188281] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 2.188697] probe of 0000:00:01.3 returned 0 after 828 usecs
[ 2.190271] probe of virtio1 returned 0 after 4521 usecs
[ 2.191725] initcall virtio_input_driver_init+0x0/0xff0 [virtio_input] returned 0 after 4670 usecs
[ 2.200838] initcall piix4_driver_init+0x0/0xff0 [i2c_piix4] returned 0 after 13782 usecs
[ 2.202776] calling joydev_init+0x0/0xff0 [joydev] @ 380
[ 2.203260] initcall joydev_init+0x0/0xff0 [joydev] returned 0 after 168 usecs
[ 2.215623] calling alsa_sound_init+0x0/0xa0 [snd] @ 424
[ 2.215912] initcall alsa_sound_init+0x0/0xa0 [snd] returned 0 after 8 usecs
[ 2.228640] calling net_failover_init+0x0/0xff0 [net_failover] @ 398
[ 2.228941] initcall net_failover_init+0x0/0xff0 [net_failover] returned 0 after 0 usecs
[ 2.235398] calling cstate_pmu_init+0x0/0xff0 [intel_cstate] @ 399
[ 2.235696] initcall cstate_pmu_init+0x0/0xff0 [intel_cstate] returned -19 after 0 usecs
[ 2.237496] calling alsa_timer_init+0x0/0xff0 [snd_timer] @ 463
[ 2.238263] initcall alsa_timer_init+0x0/0xff0 [snd_timer] returned 0 after 498 usecs
[ 2.252223] calling virtio_net_driver_init+0x0/0xff0 [virtio_net] @ 398
[ 2.258840] probe of virtio0 returned 0 after 6270 usecs
[ 2.261723] initcall virtio_net_driver_init+0x0/0xff0 [virtio_net] returned 0 after 9161 usecs
[ 2.269912] calling alsa_seq_device_init+0x0/0xff0 [snd_seq_device] @ 463
[ 2.273083] initcall alsa_seq_device_init+0x0/0xff0 [snd_seq_device] returned 0 after 2855 usecs
[ 2.309385] virtio_net virtio0 ens3: renamed from eth0
[ 2.310546] calling alsa_seq_init+0x0/0x60 [snd_seq] @ 492
[ 2.312178] calling rapl_pmu_init+0x0/0xdb0 [rapl] @ 387
[ 2.312524] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[ 2.312918] initcall rapl_pmu_init+0x0/0xdb0 [rapl] returned 0 after 428 usecs
[ 2.314701] initcall alsa_seq_init+0x0/0x60 [snd_seq] returned 0 after 2210 usecs
[ 2.316535] calling sha1_ssse3_mod_init+0x0/0xff0 [sha1_ssse3] @ 383
[ 2.316822] initcall sha1_ssse3_mod_init+0x0/0xff0 [sha1_ssse3] returned 0 after 6 usecs
[ 2.318991] calling sha256_ssse3_mod_init+0x0/0xff0 [sha256_ssse3] @ 387
[ 2.319403] initcall sha256_ssse3_mod_init+0x0/0xff0 [sha256_ssse3] returned 0 after 13 usecs
[ 2.320497] calling alsa_rawmidi_init+0x0/0xff0 [snd_rawmidi] @ 533
[ 2.320775] initcall alsa_rawmidi_init+0x0/0xff0 [snd_rawmidi] returned 0 after 0 usecs
[ 2.321242] calling sha512_ssse3_mod_init+0x0/0xff0 [sha512_ssse3] @ 399
[ 2.321538] initcall sha512_ssse3_mod_init+0x0/0xff0 [sha512_ssse3] returned 0 after 10 usecs
[ 2.325295] calling ghash_pclmulqdqni_mod_init+0x0/0xff0 [ghash_clmulni_intel] @ 387
[ 2.325689] initcall ghash_pclmulqdqni_mod_init+0x0/0xff0 [ghash_clmulni_intel] returned 0 after 28 usecs
[ 2.326268] calling seq_midisynth_driver_init+0x0/0xff0 [snd_seq_midi] @ 540
[ 2.326882] initcall seq_midisynth_driver_init+0x0/0xff0 [snd_seq_midi] returned 0 after 219 usecs
[ 2.334878] calling alsa_pcm_init+0x0/0xff0 [snd_pcm] @ 560
[ 2.335238] initcall alsa_pcm_init+0x0/0xff0 [snd_pcm] returned 0 after 3 usecs
[ 2.342650] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended
[ 2.345124] EXT4-fs (sda1): mounted filesystem cfaaa870-4d52-434c-8626-a398f6c7edd3 r/w with ordered data mode. Quota mode: none.
[ 2.347517] EXT4-fs (sdb): mounted filesystem 1b1b0571-175b-4b83-9612-38293c03950b r/w with ordered data mode. Quota mode: none.
[ 2.363418] calling ac97_bus_init+0x0/0xff0 [ac97_bus] @ 377
[ 2.363670] calling kvm_x86_init+0x0/0x50 [kvm] @ 383
[ 2.363916] initcall ac97_bus_init+0x0/0xff0 [ac97_bus] returned 0 after 28 usecs
[ 2.364199] initcall kvm_x86_init+0x0/0x50 [kvm] returned 0 after 16 usecs
[ 2.376665] calling intel8x0_driver_init+0x0/0xff0 [snd_intel8x0] @ 377
[ 2.376693] calling vmx_init+0x0/0x1c0 [kvm_intel] @ 383
[ 2.384646] initcall vmx_init+0x0/0x1c0 [kvm_intel] returned 0 after 7231 usecs
[ 2.387398] calling rapl_init+0x0/0xff0 [intel_rapl_common] @ 399
[ 2.387757] initcall rapl_init+0x0/0xff0 [intel_rapl_common] returned 0 after 82 usecs
[ 2.391443] calling intel_rapl_msr_driver_init+0x0/0xff0 [intel_rapl_msr] @ 390
[ 2.391933] intel_rapl_msr: PL4 support detected.
[ 2.392334] probe of intel_rapl_msr.0 returned 19 after 405 usecs
[ 2.392755] initcall intel_rapl_msr_driver_init+0x0/0xff0 [intel_rapl_msr] returned 0 after 836 usecs
[ 2.393381] ACPI: \_SB_.LNKA: Enabled at IRQ 11
[ 2.393702] snd_intel8x0 0000:00:05.0: enable KVM optimization
[ 2.666165] probe of 0000:00:05.0 returned 0 after 289130 usecs
[ 2.666592] initcall intel8x0_driver_init+0x0/0xff0 [snd_intel8x0] returned 0 after 274672 usecs
[ 3.033317] calling pppox_init+0x0/0xff0 [pppox] @ 947
[ 3.033649] NET: Registered PF_PPPOX protocol family
[ 3.033924] initcall pppox_init+0x0/0xff0 [pppox] returned 0 after 276 usecs
[ 3.055906] calling udp_tunnel_nic_init_module+0x0/0xff0 [udp_tunnel] @ 972
[ 3.056375] initcall udp_tunnel_nic_init_module+0x0/0xff0 [udp_tunnel] returned 0 after 10 usecs
[ 3.076003] calling l2tp_init+0x0/0xff0 [l2tp_core] @ 972
[ 3.076337] l2tp_core: L2TP core driver, V2.0
[ 3.076569] initcall l2tp_init+0x0/0xff0 [l2tp_core] returned 0 after 242 usecs
[ 3.089753] calling l2tp_nl_init+0x0/0xff0 [l2tp_netlink] @ 972
[ 3.090092] l2tp_netlink: L2TP netlink interface
[ 3.090368] initcall l2tp_nl_init+0x0/0xff0 [l2tp_netlink] returned 0 after 275 usecs
[ 3.099709] calling pppol2tp_init+0x0/0xff0 [l2tp_ppp] @ 972
[ 3.100163] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.100556] initcall pppol2tp_init+0x0/0xff0 [l2tp_ppp] returned 0 after 401 usecs
[ 3.270793] calling xfrm_user_init+0x0/0xff0 [xfrm_user] @ 1065
[ 3.271137] Initializing XFRM netlink socket
[ 3.271378] initcall xfrm_user_init+0x0/0xff0 [xfrm_user] returned 0 after 240 usecs
[ 64.905707] systemd-journald[339]: Received client request to flush runtime journal.
[ 148.858276][ T5526] faux_driver vhci_hcd.0: fdev(0) rhport(0) sockfd(3)
[ 148.858729][ T5526] faux_driver vhci_hcd.0: devid(262147) speed(5) speed_str(super-speed)
[ 148.859305][ T5526] faux_driver vhci_hcd.0: Device attached
[ 149.104698][ T314] usb 4-1: SetAddress Request (2) to port 0
[ 149.105166][ T314] usb 4-1: new SuperSpeed USB device number 2 using faux_driver
[ 149.127370][ T314] usb 4-1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10
[ 149.128060][ T314] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 149.128670][ T314] usb 4-1: Product: DataTraveler 3.0
[ 149.129064][ T314] usb 4-1: Manufacturer: Kingston
[ 149.129441][ T314] usb 4-1: SerialNumber: 4CEDFB74A335E611091101EF
[ 149.132029][ T314] probe of 4-1 returned 0 after 1987 usecs
[ 149.139610][ T5545] calling usb_storage_driver_init+0x0/0xff0 [usb_storage] @ 5545
[ 149.140190][ T5545] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 149.141136][ T5545] scsi host2: usb-storage 4-1:1.0
[ 149.141509][ T5545] probe of 4-1:1.0 returned 0 after 1328 usecs
[ 149.141882][ T5545] usbcore: registered new interface driver usb-storage
[ 149.142295][ T5545] initcall usb_storage_driver_init+0x0/0xff0 [usb_storage] returned 0 after 2191 usecs
[ 149.144591][ T5545] calling uas_init+0x0/0xff0 [uas] @ 5545
[ 149.145236][ T5545] usbcore: registered new interface driver uas
[ 149.145707][ T5545] initcall uas_init+0x0/0xff0 [uas] returned 0 after 561 usecs
[ 150.175351][ T40] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 150.177079][ T40] probe of 2:0:0:0 returned 19 after 11 usecs
[ 150.178324][ T40] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 150.181202][ T109] sd 2:0:0:0: [sdc] 60530688 512-byte logical blocks: (31.0 GB/28.9 GiB)
[ 150.184149][ T109] sd 2:0:0:0: [sdc] Write Protect is off
[ 150.185235][ T109] sd 2:0:0:0: [sdc] Mode Sense: 45 00 00 00
[ 150.186991][ T109] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 150.205870][ T109] sdc:
[ 150.206127][ T109] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 150.206623][ T109] probe of 2:0:0:0 returned 0 after 28534 usecs
[ 150.420620][ T5577] calling init_exfat_fs+0x0/0xff0 [exfat] @ 5577
[ 150.421569][ T5577] initcall init_exfat_fs+0x0/0xff0 [exfat] returned 0 after 67 usecs
[ 150.423181][ T5574] exfat: Deprecated parameter 'namecase'
[ 150.424615][ T5574] exFAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 150.471118][ T1897] ukui-flash-disk[1897]: segfault at 0 ip 000055c4d4812dcb sp 00007fff19ef0cc0 error 4 in ukui-flash-disk[40dcb,55c4d47f9000+61000] likely on CPU 2 (core 0, socket 2)
[ 150.472234][ T1897] Code: ff 85 c0 4c 89 ef 0f 95 84 24 e1 00 00 00 e8 1c 8d fe ff 48 8b b4 24 a0 00 00 00 48 89 ef 4c 8b 2d 7a 42 06 00 e8 65 77 ff ff <49> 8b 7d 00 48 89 ee e8 19 ec 00 00 48 89 ef 49 89 c5 e8 1e 64 ff
[ 162.285420][ T5775] PM: suspend entry (s2idle)
[ 162.328313][ T5775] Filesystems sync: 0.041 seconds
[ 162.429520][ T5775] Freezing user space processes
[ 162.431997][ T5775] Freezing user space processes completed (elapsed 0.002 seconds)
[ 162.432482][ T5775] OOM killer disabled.
[ 162.432754][ T5775] Freezing remaining freezable tasks
[ 162.434397][ T5775] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 162.434974][ T5775] sound pcmC0D1c: PM: calling do_pcm_suspend [snd_pcm] @ 5775, parent: card0
[ 162.435410][ T5775] sound pcmC0D1c: PM: do_pcm_suspend [snd_pcm] returned 0 after 0 usecs
[ 162.435815][ T5775] sound pcmC0D0c: PM: calling do_pcm_suspend [snd_pcm] @ 5775, parent: card0
[ 162.436221][ T109] sd 2:0:0:0: PM: calling scsi_bus_suspend @ 109, parent: target2:0:0
[ 162.436264][ T5775] sound pcmC0D0c: PM: do_pcm_suspend [snd_pcm] returned 0 after 0 usecs
[ 162.437167][ T5775] sound pcmC0D0p: PM: calling do_pcm_suspend [snd_pcm] @ 5775, parent: card0
[ 162.437679][ T5775] sound pcmC0D0p: PM: do_pcm_suspend [snd_pcm] returned 0 after 0 usecs
[ 162.438166][ T5775] platform intel_rapl_msr.0: PM: calling platform_pm_suspend @ 5775, parent: platform
[ 162.438684][ T5775] platform intel_rapl_msr.0: PM: platform_pm_suspend returned 0 after 0 usecs
[ 162.439104][ T5775] input input5: PM: calling input_dev_suspend @ 5775, parent: virtio1
[ 162.439490][ T5775] input input5: PM: input_dev_suspend returned 0 after 0 usecs
[ 162.440005][ T5786] usb usb3: PM: calling usb_dev_suspend @ 5786, parent: vhci_hcd.0
[ 162.440425][ T5786] usb usb3: PM: usb_dev_suspend returned 0 after 32 usecs
[ 162.452245][ T109] sd 2:0:0:0: PM: scsi_bus_suspend returned 0 after 15568 usecs
[ 162.452709][ T40] scsi target2:0:0: PM: calling scsi_bus_suspend @ 40, parent: host2
[ 162.453095][ T40] scsi target2:0:0: PM: scsi_bus_suspend returned 0 after 0 usecs
[ 162.453498][ T102] scsi host2: PM: calling scsi_bus_suspend @ 102, parent: 4-1:1.0
[ 162.454095][ T102] scsi host2: PM: scsi_bus_suspend returned 0 after 0 usecs
[ 162.454723][ T5784] usb 4-1: PM: calling usb_dev_suspend @ 5784, parent: usb4
[ 162.468217][ T5784] usb 4-1: PM: usb_dev_suspend returned 0 after 13005 usecs
[ 162.468718][ T5785] usb usb4: PM: calling usb_dev_suspend @ 5785, parent: vhci_hcd.0
[ 162.469157][ T5785] usb usb4: PM: usb_dev_suspend returned 0 after 8 usecs
[ 162.469609][ T5775] faux_driver vhci_hcd.0: PM: calling faux_pm_suspend @ 5775, parent: faux
[ 162.470911][ T5775] faux_driver vhci_hcd.0: We have 1 active connection. Do not suspend.
[ 162.471331][ T5775] faux_driver vhci_hcd.0: PM: legacy_suspend(): faux_pm_suspend returns -16
[ 162.471743][ T5775] faux_driver vhci_hcd.0: PM: faux_pm_suspend returned -16 after 1701 usecs
[ 162.472150][ T5775] faux_driver vhci_hcd.0: PM: failed to suspend: error -16
[ 162.472513][ T5775] PM: Some devices failed to suspend, or early wake event detected
[ 162.472902][ T5775] input input5: PM: calling input_dev_resume @ 5775, parent: virtio1
[ 162.473286][ T5775] input input5: PM: input_dev_resume returned 0 after 0 usecs
[ 162.473637][ T5775] platform intel_rapl_msr.0: PM: calling platform_pm_resume @ 5775, parent: platform
[ 162.474079][ T5775] platform intel_rapl_msr.0: PM: platform_pm_resume returned 0 after 0 usecs
[ 162.474499][ T5785] usb usb3: PM: calling usb_dev_resume @ 5785, parent: vhci_hcd.0
[ 162.474888][ T5785] usb usb3: PM: usb_dev_resume returned 0 after 24 usecs
[ 162.475221][ T5785] usb usb4: PM: calling usb_dev_resume @ 5785, parent: vhci_hcd.0
[ 162.496301][ T5785] usb usb4: PM: usb_dev_resume returned 0 after 20712 usecs
[ 162.497467][ T5790] usb 4-1: PM: calling usb_dev_resume @ 5790, parent: usb4
[-- Attachment #3: 0001-driver-core-add-pm-hook-on-faux-bus.patch --]
[-- Type: text/x-patch, Size: 2843 bytes --]
From 20d58dc7804cc65cc3b5468e838d6788c7c3a1e0 Mon Sep 17 00:00:00 2001
From: Zongmin Zhou <zhouzongmin@kylinos.cn>
Date: Thu, 3 Jul 2025 10:10:17 +0800
Subject: [PATCH] driver core: add pm hook on faux bus
Some devices based on faux bus may
have to do something during suspend/resume.
So add pm hook to let it use its own suspend/resume hooks if had.
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
---
drivers/base/faux.c | 33 +++++++++++++++++++++++++++++++++
drivers/usb/usbip/vhci_hcd.c | 2 ++
include/linux/device/faux.h | 2 ++
3 files changed, 37 insertions(+)
diff --git a/drivers/base/faux.c b/drivers/base/faux.c
index 407c1d1aad50..cbaf265e9b6c 100644
--- a/drivers/base/faux.c
+++ b/drivers/base/faux.c
@@ -61,11 +61,44 @@ static void faux_remove(struct device *dev)
faux_ops->remove(faux_dev);
}
+#ifdef CONFIG_PM
+static int faux_pm_suspend(struct device *dev, pm_message_t state)
+{
+ struct faux_object *faux_obj = to_faux_object(dev);
+ struct faux_device *faux_dev = &faux_obj->faux_dev;
+ const struct faux_device_ops *faux_ops = faux_obj->faux_ops;
+ int ret = 0;
+
+ if (faux_ops && faux_ops->suspend)
+ ret = faux_ops->suspend(faux_dev, state);
+
+ return ret;
+}
+
+static int faux_pm_resume(struct device *dev)
+{
+ struct faux_object *faux_obj = to_faux_object(dev);
+ struct faux_device *faux_dev = &faux_obj->faux_dev;
+ const struct faux_device_ops *faux_ops = faux_obj->faux_ops;
+ int ret = 0;
+
+ if (faux_ops && faux_ops->suspend)
+ ret = faux_ops->resume(faux_dev);
+
+ return ret;
+}
+#else
+#define faux_pm_suspend NULL
+#define faux_pm_resume NULL
+#endif
+
static const struct bus_type faux_bus_type = {
.name = "faux",
.match = faux_match,
.probe = faux_probe,
.remove = faux_remove,
+ .suspend = faux_pm_suspend,
+ .resume = faux_pm_resume,
};
static struct device_driver faux_driver = {
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 4e6d7d23e915..79c026108d7b 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -1483,6 +1483,8 @@ static int vhci_hcd_resume(struct faux_device *fdev)
static struct faux_device_ops vhci_driver = {
.remove = vhci_hcd_remove,
+ .suspend = vhci_hcd_suspend,
+ .resume = vhci_hcd_resume,
};
static void del_faux_devices(void)
diff --git a/include/linux/device/faux.h b/include/linux/device/faux.h
index 9f43c0e46aa4..9dc4b81c672c 100644
--- a/include/linux/device/faux.h
+++ b/include/linux/device/faux.h
@@ -45,6 +45,8 @@ struct faux_device {
struct faux_device_ops {
int (*probe)(struct faux_device *faux_dev);
void (*remove)(struct faux_device *faux_dev);
+ int (*suspend)(struct faux_device *faux_dev, pm_message_t state);
+ int (*resume)(struct faux_device *faux_dev);
};
struct faux_device *faux_device_create(const char *name,
--
2.25.1
next prev parent reply other threads:[~2025-07-03 6:05 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-08 9:11 [PATCH 0/2] some changes based on faux bus Zongmin Zhou
2025-05-08 9:11 ` [PATCH 1/2] driver core:add device's platform_data set for faux device Zongmin Zhou
2025-05-08 9:45 ` Greg KH
2025-05-09 2:41 ` Zongmin Zhou
2025-05-21 10:51 ` Greg KH
2025-05-28 9:21 ` Zongmin Zhou
2025-05-08 9:11 ` [PATCH 2/2] usbip: convert to use faux_device Zongmin Zhou
2025-05-09 10:42 ` kernel test robot
2025-06-04 6:54 ` [PATCH v2] " Zongmin Zhou
2025-06-10 15:15 ` Shuah Khan
2025-06-19 11:02 ` Greg KH
2025-06-19 11:01 ` Greg KH
2025-06-20 2:16 ` Zongmin Zhou
2025-06-20 4:29 ` Greg KH
2025-06-20 9:19 ` Zongmin Zhou
2025-06-20 9:27 ` Greg KH
2025-06-20 17:26 ` Shuah Khan
2025-06-24 3:21 ` Zongmin Zhou
2025-07-01 22:56 ` Shuah Khan
2025-07-02 2:12 ` Zongmin Zhou
2025-07-02 23:54 ` Shuah Khan
2025-07-03 6:04 ` Zongmin Zhou [this message]
2025-07-08 18:16 ` Shuah Khan
2025-07-09 9:07 ` Zongmin Zhou
2025-07-09 10:06 ` Greg KH
2025-07-09 14:20 ` Alan Stern
2025-07-09 21:49 ` Shuah Khan
2025-07-09 21:57 ` Shuah Khan
2025-07-10 14:06 ` Alan Stern
2025-07-10 20:33 ` Shuah Khan
2025-07-11 5:56 ` Greg KH
2025-07-14 5:31 ` Zongmin Zhou
2025-07-09 21:33 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4fc877f0-b55b-4fa3-8df4-2de4ba1ac51b@163.com \
--to=min_halo@163.com \
--cc=gregkh@linuxfoundation.org \
--cc=i@zenithal.me \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=shuah@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=valentina.manea.m@gmail.com \
--cc=zhouzongmin@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®