From: Andrew Davis <afd@ti.com>
To: "Verma, Achal" <a-verma1@ti.com>, Nishanth Menon <nm@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Robert Nelson <robertcnelson@gmail.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/5] arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes
Date: Tue, 16 May 2023 11:27:03 -0500 [thread overview]
Message-ID: <4ff112d9-5c94-e7eb-8c94-4be769285a03@ti.com> (raw)
In-Reply-To: <1de1328a-cfc9-d77c-eb11-3c341b46623b@ti.com>
On 5/16/23 11:22 AM, Verma, Achal wrote:
>
>
> On 5/15/2023 10:51 PM, Andrew Davis wrote:
>> These nodes are example nodes for the PCIe controller in "endpoint" mode.
>> By default the controller is in "root complex" mode and there is already a
>> DT node for the same.
>>
>> Examples should go in the bindings or other documentation.
>>
>> Remove this node.
> How we will support EP from now onwards, using overlays ?
>
They are already disabled, how do you support them today?
Andrew
> Regards,
> Achal Verma
>>
>> Signed-off-by: Andrew Davis <afd@ti.com>
>> ---
>> .../boot/dts/ti/k3-j721e-beagleboneai64.dts | 24 ------
>> .../dts/ti/k3-j721e-common-proc-board.dts | 25 ------
>> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 82 -------------------
>> arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 24 ------
>> 4 files changed, 155 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
>> index 8a62ac263b89..d77eeff0d81d 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
>> @@ -892,35 +892,11 @@ &pcie2_rc {
>> status = "disabled";
>> };
>> -&pcie0_ep {
>> - status = "disabled";
>> - phys = <&serdes0_pcie_link>;
>> - phy-names = "pcie-phy";
>> - num-lanes = <1>;
>> -};
>> -
>> -&pcie1_ep {
>> - status = "disabled";
>> - phys = <&serdes1_pcie_link>;
>> - phy-names = "pcie-phy";
>> - num-lanes = <2>;
>> -};
>> -
>> -&pcie2_ep {
>> - /* Unused */
>> - status = "disabled";
>> -};
>> -
>> &pcie3_rc {
>> /* Unused */
>> status = "disabled";
>> };
>> -&pcie3_ep {
>> - /* Unused */
>> - status = "disabled";
>> -};
>> -
>> &icssg0_mdio {
>> /* Unused */
>> status = "disabled";
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
>> index 7db0603125aa..87b7263f6547 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
>> @@ -840,35 +840,10 @@ &pcie2_rc {
>> num-lanes = <2>;
>> };
>> -&pcie0_ep {
>> - phys = <&serdes0_pcie_link>;
>> - phy-names = "pcie-phy";
>> - num-lanes = <1>;
>> - status = "disabled";
>> -};
>> -
>> -&pcie1_ep {
>> - phys = <&serdes1_pcie_link>;
>> - phy-names = "pcie-phy";
>> - num-lanes = <2>;
>> - status = "disabled";
>> -};
>> -
>> -&pcie2_ep {
>> - phys = <&serdes2_pcie_link>;
>> - phy-names = "pcie-phy";
>> - num-lanes = <2>;
>> - status = "disabled";
>> -};
>> -
>> &pcie3_rc {
>> status = "disabled";
>> };
>> -&pcie3_ep {
>> - status = "disabled";
>> -};
>> -
>> &icssg0_mdio {
>> status = "disabled";
>> };
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>> index 10c8a5fb4ee2..e39f6d1e8d40 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>> @@ -816,26 +816,6 @@ pcie0_rc: pcie@2900000 {
>> dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
>> };
>> - pcie0_ep: pcie-ep@2900000 {
>> - compatible = "ti,j721e-pcie-ep";
>> - reg = <0x00 0x02900000 0x00 0x1000>,
>> - <0x00 0x02907000 0x00 0x400>,
>> - <0x00 0x0d000000 0x00 0x00800000>,
>> - <0x00 0x10000000 0x00 0x08000000>;
>> - reg-names = "intd_cfg", "user_cfg", "reg", "mem";
>> - interrupt-names = "link_state";
>> - interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
>> - ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
>> - max-link-speed = <3>;
>> - num-lanes = <2>;
>> - power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
>> - clocks = <&k3_clks 239 1>;
>> - clock-names = "fck";
>> - max-functions = /bits/ 8 <6>;
>> - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
>> - dma-coherent;
>> - };
>> -
>> pcie1_rc: pcie@2910000 {
>> compatible = "ti,j721e-pcie-host";
>> reg = <0x00 0x02910000 0x00 0x1000>,
>> @@ -864,26 +844,6 @@ pcie1_rc: pcie@2910000 {
>> dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
>> };
>> - pcie1_ep: pcie-ep@2910000 {
>> - compatible = "ti,j721e-pcie-ep";
>> - reg = <0x00 0x02910000 0x00 0x1000>,
>> - <0x00 0x02917000 0x00 0x400>,
>> - <0x00 0x0d800000 0x00 0x00800000>,
>> - <0x00 0x18000000 0x00 0x08000000>;
>> - reg-names = "intd_cfg", "user_cfg", "reg", "mem";
>> - interrupt-names = "link_state";
>> - interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
>> - ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
>> - max-link-speed = <3>;
>> - num-lanes = <2>;
>> - power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
>> - clocks = <&k3_clks 240 1>;
>> - clock-names = "fck";
>> - max-functions = /bits/ 8 <6>;
>> - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
>> - dma-coherent;
>> - };
>> -
>> pcie2_rc: pcie@2920000 {
>> compatible = "ti,j721e-pcie-host";
>> reg = <0x00 0x02920000 0x00 0x1000>,
>> @@ -912,26 +872,6 @@ pcie2_rc: pcie@2920000 {
>> dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
>> };
>> - pcie2_ep: pcie-ep@2920000 {
>> - compatible = "ti,j721e-pcie-ep";
>> - reg = <0x00 0x02920000 0x00 0x1000>,
>> - <0x00 0x02927000 0x00 0x400>,
>> - <0x00 0x0e000000 0x00 0x00800000>,
>> - <0x44 0x00000000 0x00 0x08000000>;
>> - reg-names = "intd_cfg", "user_cfg", "reg", "mem";
>> - interrupt-names = "link_state";
>> - interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
>> - ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
>> - max-link-speed = <3>;
>> - num-lanes = <2>;
>> - power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
>> - clocks = <&k3_clks 241 1>;
>> - clock-names = "fck";
>> - max-functions = /bits/ 8 <6>;
>> - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
>> - dma-coherent;
>> - };
>> -
>> pcie3_rc: pcie@2930000 {
>> compatible = "ti,j721e-pcie-host";
>> reg = <0x00 0x02930000 0x00 0x1000>,
>> @@ -960,28 +900,6 @@ pcie3_rc: pcie@2930000 {
>> dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
>> };
>> - pcie3_ep: pcie-ep@2930000 {
>> - compatible = "ti,j721e-pcie-ep";
>> - reg = <0x00 0x02930000 0x00 0x1000>,
>> - <0x00 0x02937000 0x00 0x400>,
>> - <0x00 0x0e800000 0x00 0x00800000>,
>> - <0x44 0x10000000 0x00 0x08000000>;
>> - reg-names = "intd_cfg", "user_cfg", "reg", "mem";
>> - interrupt-names = "link_state";
>> - interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
>> - ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
>> - max-link-speed = <3>;
>> - num-lanes = <2>;
>> - power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
>> - clocks = <&k3_clks 242 1>;
>> - clock-names = "fck";
>> - max-functions = /bits/ 8 <6>;
>> - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
>> - dma-coherent;
>> - #address-cells = <2>;
>> - #size-cells = <2>;
>> - };
>> -
>> serdes_wiz4: wiz@5050000 {
>> compatible = "ti,am64-wiz-10g";
>> #address-cells = <1>;
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> index f650a7fd66b4..07d3282a583b 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
>> @@ -896,35 +896,11 @@ &pcie2_rc {
>> status = "disabled";
>> };
>> -&pcie0_ep {
>> - status = "disabled";
>> - phys = <&serdes0_pcie_link>;
>> - phy-names = "pcie-phy";
>> - num-lanes = <1>;
>> -};
>> -
>> -&pcie1_ep {
>> - status = "disabled";
>> - phys = <&serdes1_pcie_link>;
>> - phy-names = "pcie-phy";
>> - num-lanes = <2>;
>> -};
>> -
>> -&pcie2_ep {
>> - /* Unused */
>> - status = "disabled";
>> -};
>> -
>> &pcie3_rc {
>> /* Unused */
>> status = "disabled";
>> };
>> -&pcie3_ep {
>> - /* Unused */
>> - status = "disabled";
>> -};
>> -
>> &icssg0_mdio {
>> status = "disabled";
>> };
next prev parent reply other threads:[~2023-05-16 16:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-15 17:21 [PATCH 1/5] arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status Andrew Davis
2023-05-15 17:21 ` [PATCH 2/5] arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes Andrew Davis
2023-05-16 16:22 ` Verma, Achal
2023-05-16 16:27 ` Andrew Davis [this message]
2023-06-05 14:54 ` Verma, Achal
2023-06-05 15:17 ` Andrew Davis
2023-06-05 16:06 ` Verma, Achal
2023-05-15 17:21 ` [PATCH 3/5] arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level Andrew Davis
2023-05-15 17:21 ` [PATCH 4/5] arm64: dts: ti: k3-am64: Enable Mailbox " Andrew Davis
2023-05-15 17:21 ` [PATCH 5/5] arm64: dts: ti: k3-j721e: Enable MDIO " Andrew Davis
2023-05-16 13:51 ` [PATCH 1/5] arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status Nishanth Menon
2023-06-15 10:30 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ff112d9-5c94-e7eb-8c94-4be769285a03@ti.com \
--to=afd@ti.com \
--cc=a-verma1@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robertcnelson@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®