Re: [PATCH net-next v4 1/4] net: phy: microchip_t1s: fix collision detection on PLCA status change

[Parthiban Veerasooran <parthiban.veerasooran@microchip.com>]

Hi,

Thanks for the review.

I’ll look into the reported comments in all the patches in this series 
and get back with the necessary updates as soon as possible.

Thanks,
Parthiban V

On 03/10/26 7:06 pm, netdev-bot+sashiko@kernel.org wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Thank you for your contribution! Sashiko AI review found 3 potential
> issue(s) to consider.
> 
> Critical: 0 · High: 0 · Medium: 1 · Low: 2
> 
> If you believe none of the issues are legitimate, please reply to each
> issue of Medium severity or higher and explain why the AI is wrong.
> If any of them are legitimate and you plan to respin, please let patchwork
> know by including "pw-bot: cr" as a separate line at the end of your reply
> (one such reply per series is enough).
> 
> - [Medium] The collision-detect (CDEN) setting is chosen from a software
>    copy of the PLCA enable state (priv->plca_enabled), not from the PHY's…
> - [Low] [Baseline decision: false.
> - [Low] [Baseline decision: false.
> 
> --
> 
> net: phy: microchip_t1s: fix collision detection on PLCA status change
> 
> This patch makes the collision detection enable bit (CDEN) follow
> autonomous PLCA/CSMA-CD transitions. It adds a PLCA status change
> interrupt and a resync in read_status(), and it takes the PRSCTL1
> fallback bit into account. It also adds a probe routine that allocates
> a per-PHY mutex and a cached plca_enabled value, and it treats
> plca_cfg->enabled as tri-state.
> 
>> diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c
>> index 73c23d311d72a..5ce0304bf0952 100644
>> --- a/drivers/net/phy/microchip_t1s.c
>> +++ b/drivers/net/phy/microchip_t1s.c