From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 22 Oct 2002 22:14:16 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 22 Oct 2002 22:14:16 -0400 Received: from funkie.transmit.com ([204.69.232.71]:56337 "EHLO funkie.transmit.com") by vger.kernel.org with ESMTP id ; Tue, 22 Oct 2002 22:14:16 -0400 Message-Id: <5.1.0.14.0.20021022190139.0375b698@mail.toolfoundry.com> X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 22 Oct 2002 19:17:41 -0700 To: linux-kernel@vger.kernel.org From: Ethan Joffe Subject: 2.4.19 unresolved symbols Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I have a dual P3 box with 2Gigs RAM booting off onboard scsi, and I am unable to get the latest v2.4.19 kernel to support the hardware fully. I can get the kernel working if I do not have it configured for 4G support, in which case it only sees 900Megs or so of RAM, but everything works and boots properly. When I config for 4Gig however, the system fails to boot, giving a bunch of errors like the following: /lib/ext3.0: unresolved symbol highmem_start_page /lib/ext3.0: unresolved symbol journal_blocks_per_page_Rsmp_6082191c /lib/ext3.0: unresolved symbol kmap_high /lib/ext3.0: unresolved symbol journal_forget_Rsmp_678417a8 ... ERROR: /bin/insmod exited abnormally I have compiled from scratch multiple times using make menuconfig, from freshly untarred sources just downloaded from kernel.org . All of the system.map and initrd type stuff is setup properly in the boot dir by the 2.4.19 make files. To restate the situation... if I boot from floppy and build the kernel with 4G support it does not work, then if I reboot from floppy and flip 4G support off and rebuild, everything works fine except only 900Megs seen. I am configuring to boot from onboard scsi (module sym53c8xx) , so maybe it is related to that and/or smp support? Any idea what this means and how I can go about getting this fixed? Thanks Ethan