From: Jim Peterson <jpeterson@annapmicro.com>
To: linux-kernel@vger.kernel.org
Subject: v2.5.32 - v2.5.64+ Locks at Boot with Athlon Machine
Date: Wed, 12 Mar 2003 11:32:49 -0500 [thread overview]
Message-ID: <5.1.0.14.0.20030312104635.022b1178@shrek> (raw)
I've tried versions 2.5.32, 2.5.59, 2.5.61, and 2.5.64, as well as version 2.5.31 and
earlier on my machine. Every version from 2.5.32 and above locks up after printing:
Uncompressing Linux... Ok, booting the kernel.
I've noticed there have been some significant changes in what I understand of the boot
process at this point, but I can't decipher the assembly hardly at all well enough to
try to investigate further. Is there any place that I can acquire a set of the
separate, unrelated patches that happened between 2.5.31 (which boots) and 2.5.32?
I'm basically a trained monkey when it comes to debugging this kind of thing, so I'm
going to have to try the old "back out a patch and see if it works" technique.
My config file is pretty bare-bones, I've tried with and without the "mem=nopentium"
and "noauto" kernel parameters (as dredged up via Google). I've also tried replacing
setup.S from v2.5.31, this just immediately reboots.
Any help would be greatly appreciated,
--Jim
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 4
cpu MHz : 1391.718
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 2778.72
CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_MODULES=y
CONFIG_KMOD=y
CONFIG_MK7=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_NOHIGHMEM=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_BLK_DEV_FD=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_INET=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=m
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_I8042_REG_BASE=60
CONFIG_I8042_KBD_IRQ=1
CONFIG_I8042_AUX_IRQ=12
CONFIG_SERIO_SERPORT=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_VIA=y
CONFIG_QUOTA=y
CONFIG_QUOTACTL=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_MINIX_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_3=m
CONFIG_USB=y
CONFIG_SECURITY_CAPABILITIES=y
next reply other threads:[~2003-03-12 16:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-12 16:32 Jim Peterson [this message]
2003-03-14 12:09 ` Karl Vogel
2003-03-15 13:45 ` Duncan Sands
2003-03-17 16:09 ` Jim Peterson
[not found] <20030315135007$3ee8@gated-at.bofh.it>
[not found] ` <20030315135007$10c9@gated-at.bofh.it>
[not found] ` <20030315135007$71e8@gated-at.bofh.it>
2003-03-15 23:03 ` Karl Vogel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5.1.0.14.0.20030312104635.022b1178@shrek \
--to=jpeterson@annapmicro.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®