From: Peter Lieverdink <cafuego@cc.com.au>
To: Thomas Schlichter <schlicht@uni-mannheim.de>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.0-test4: ACPI breaks IDE/USB
Date: Mon, 25 Aug 2003 11:13:03 +1000 [thread overview]
Message-ID: <5.1.0.14.2.20030825110731.00bd1248@caffeine.cc.com.au> (raw)
In-Reply-To: <200308242344.50883.schlicht@uni-mannheim.de>
Hi Thomas,
Your patch works beautifully. 'acpi=nopci' previously caused IDE to work
fine, but made the kernel not detect USB and network devices. With your
patch it sees all peripherals AND acpi is available for the cpu. I wonder
if it would be accepted into the kernel as a patch to workaround buggy acpi
bioses.
Thanks heaps!
- Peter.
--
At 23:44 24/08/2003 +0200, you wrote:
>Am Sunday 24 August 2003 22:54 schrieb David van Hoose:
> > Kevin P. Fleming wrote:
> > > Peter Lieverdink wrote:
> > >> When I enable ACPI on 2.6.0-test4 (also on 2.6.0-test3-*), the kernel no
> > >> longer recognises my IDE controller and drops down to PIO mode for
> > >> harddisk access. Additionally, USB devices don't get detected.
> > >
> > > I'm running -test4 here with ACPI and have no trouble with USB devices.
> >
> > I'm running test4 here with ACPI and have no USB following a call trace
> > with "IRQ 20: nobody cared". ACPI seems to make odd reports. I've been
> > having this problem since 2.5.70'ish. Posted numerous times, but nobody
> > seems to care about it. I also have a PS/2 mouse detection when I have
> > no mice attached to my system.
> >
> > >> The system is an Athlon 2400+ on a Gibabyte GA-7VAXP mainboard. (KT400)
> > >
> > > My system is an Athlon 1000 on an MSI KT266-based board.
> >
> > I have a Pentium 4 2.53 GHz on a Asus P4S8X mainboard.
> >
> > -David
> >
> > PS. dmesg is attached with ACPI debug and USB debug enabled.
>
>I had similar problems with my Epox 8K9A (KT400) Board.
>
>If I wanted to use my USB ports I had to boot wiht 'acpi=off'. But with the
>patch attached it is possible for me to boot with 'pci=noacpi'. It has the
>advantage that ACPI stays enabled...
>
>You are free to give it a try...
>
> Thomas
>--- linux-2.6.0-test4/arch/i386/kernel/acpi/boot.c.orig Sat Aug 23
>01:59:02 2003
>+++ linux-2.6.0-test4/arch/i386/kernel/acpi/boot.c Sat Aug 23
>16:39:57 2003
>@@ -41,6 +41,7 @@
> #define PREFIX "ACPI: "
>
> extern int acpi_disabled;
>+extern int acpi_irq;
> extern int acpi_ht;
>
> int acpi_lapic = 0;
>@@ -407,7 +408,7 @@
> * If MPS is present, it will handle them,
> * otherwise the system will stay in PIC mode
> */
>- if (acpi_disabled) {
>+ if (acpi_disabled || !acpi_irq) {
> return 1;
> }
>
>@@ -450,14 +451,13 @@
> acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
>
> acpi_ioapic = 1;
>-#endif /*CONFIG_X86_IO_APIC*/
>
> #ifdef CONFIG_X86_LOCAL_APIC
>- if (acpi_lapic && acpi_ioapic) {
>- smp_found_config = 1;
>- clustered_apic_check();
>- }
>+ smp_found_config = 1;
>+ clustered_apic_check();
> #endif
>+
>+#endif /*CONFIG_X86_IO_APIC*/
>
> return 0;
> }
>--- linux-2.6.0-test4/arch/i386/kernel/setup.c.orig Sat Aug 23
>01:55:38 2003
>+++ linux-2.6.0-test4/arch/i386/kernel/setup.c Sat Aug 23 16:34:21 2003
>@@ -71,6 +71,7 @@
> EXPORT_SYMBOL(acpi_disabled);
>
> #ifdef CONFIG_ACPI_BOOT
>+ int acpi_irq __initdata = 1; /* enable IRQ */
> int acpi_ht __initdata = 1; /* enable HT */
> #endif
>
>@@ -542,6 +543,11 @@
> else if (!memcmp(from, "acpi=ht", 7)) {
> acpi_ht = 1;
> if (!acpi_force) acpi_disabled = 1;
>+ }
>+
>+ /* "pci=noacpi" disables ACPI interrupt routing */
>+ else if (!memcmp(from, "pci=noacpi", 10)) {
>+ acpi_irq = 0;
> }
>
> #ifdef CONFIG_X86_LOCAL_APIC
next prev parent reply other threads:[~2003-08-25 1:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-23 4:42 Peter Lieverdink
2003-08-23 15:20 ` Kevin P. Fleming
2003-08-24 20:54 ` David van Hoose
2003-08-24 21:44 ` Thomas Schlichter
2003-08-25 1:13 ` Peter Lieverdink [this message]
2003-08-25 8:32 ` [PATCH][2.6.0-test4] Fix 'pci=noacpi' with buggy ACPI BIOSes Thomas Schlichter
2003-08-26 13:28 ` 2.6.0-test4: ACPI breaks IDE/USB Catalin BOIE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5.1.0.14.2.20030825110731.00bd1248@caffeine.cc.com.au \
--to=cafuego@cc.com.au \
--cc=linux-kernel@vger.kernel.org \
--cc=schlicht@uni-mannheim.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®