From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 27 Oct 2002 12:02:17 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 27 Oct 2002 12:02:17 -0500 Received: from franka.aracnet.com ([216.99.193.44]:14737 "EHLO franka.aracnet.com") by vger.kernel.org with ESMTP id ; Sun, 27 Oct 2002 12:02:16 -0500 Message-Id: <5.1.1.6.0.20021027084740.0209cb70@pop.aracnet.com> X-Mailer: QUALCOMM Windows Eudora Version 5.1.1 Date: Sun, 27 Oct 2002 09:08:38 -0800 To: linux-kernel@vger.kernel.org From: Arthur Aldridge Subject: RE: Problem with ACPI on Abit KT7,HPT370 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I'm running a KT7-Raid with bios A9. After rebuilding my kernel yesterday (2.4.19-gentoo-r9) with ACPI I ran into this same issue. I noted that at that time the devices attached to the HPT370 were reporting at DMA 2. I realized I'd turned the IDE cables around. After fixing that the system worked fine. Early this morning I decided to move the DVD drive to a different system and replaced it with an older Samsung CD-ROM and I haven't been able to boot since. The only change besides the CD-ROM is that my bios setting were reset and perhaps I don't have exactly the same settings. Alt-SysRq+b responds, and if I disable the HPT370 the system boots without issue. I've tried disconnecting the CD-ROM and disabling DMA at boot, none of which is working..... I suppose I'll just go back with the HPT370 disabled and compile a non-acpi kernel to see if it starts working again but this is baffle the bejesus out of me. >Dominik Geisel (dominik_at_geisel.info) Wrote: > >I tried 2.4.10-ac10 with your config and played around with all possible >BIOS settings...the problem persists. >Also, I am now quite sure it broke with BIOS version 3R. >>On Mon, Oct 08, 2001 at 10:35:42PM +0200, Dominik Thinay wrote: >> with kernel 2.4.11-pre3-xfs + i2c CVS-patch + lmsensors it works fine on my >> system (Abit Bios KT7_49B0) >> CONFIG_PM=y >> CONFIG_ACPI=y >> CONFIG_ACPI_DEBUG=y >> CONFIG_ACPI_BUSMGR=y >> CONFIG_ACPI_SYS=y >> CONFIG_ACPI_CPU=y >> CONFIG_ACPI_BUTTON=y >> >> I remember disabled sth in the bios ...but i have forget ... :( -- Arthur Aldridge Sun Certified Solaris Admin aj@yasashi.net