From: Arthur Aldridge <aj@yasashi.net>
To: linux-kernel@vger.kernel.org
Cc: dominik@geisel.info, dominik@unix-ag.org
Subject: RE: Problem with ACPI on Abit KT7,HPT370 (Work Around)
Date: Sun, 27 Oct 2002 09:46:03 -0800 [thread overview]
Message-ID: <5.1.1.6.0.20021027093253.020d5ed8@pop.aracnet.com> (raw)
Well after posting I continued to play around and found working
combinations.
It certainly seems to be an ACPI issue. BIOS defaults in the
PNP/PCI Config screen are PNP OS = No, and all the PIRQ_#s
are set to auto. With my setup that yields IDE = IRQ 14, USBs
and Net = 10, Sound = 11, VGA = 9, HPT370 = 11 and ACPI = 11.
If I explicitly set any of the IRQ in a manner in which the HPT370
doesn't end up sharing IRQ with the ACPI controller the system
boots. The easiest way is to only explicitly set the HPT370 to IRQ
10. I don't know much about ACPI and don't know what the
significance of sharing the ACPI controller's IRQ is but this doesn't
seem to be an IRQ sharing issue as even with IDE =14, ACPI =11,
and every other PCI device sharing IRQ 10 the kernel comes up
with out issue. Also setting PNP OS either way doesn't seem to
relevant.
>Dominik Geisel (dominik_at_geisel.info) Wrote:
>
>I tried 2.4.10-ac10 with your config and played around with all possible
>BIOS settings...the problem persists.
>Also, I am now quite sure it broke with BIOS version 3R.
>>On Mon, Oct 08, 2001 at 10:35:42PM +0200, Dominik Thinay wrote:
>> with kernel 2.4.11-pre3-xfs + i2c CVS-patch + lmsensors it works fine
on my
>> system (Abit Bios KT7_49B0)
>> CONFIG_PM=y
>> CONFIG_ACPI=y
>> CONFIG_ACPI_DEBUG=y
>> CONFIG_ACPI_BUSMGR=y
>> CONFIG_ACPI_SYS=y
>> CONFIG_ACPI_CPU=y
>> CONFIG_ACPI_BUTTON=y
>>
>> I remember disabled sth in the bios ...but i have forget ... :(
--
Arthur Aldridge
Sun Certified Solaris Admin
aj@yasashi.net
reply other threads:[~2002-10-27 17:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5.1.1.6.0.20021027093253.020d5ed8@pop.aracnet.com \
--to=aj@yasashi.net \
--cc=dominik@geisel.info \
--cc=dominik@unix-ag.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®