From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com>,
Vitaly Bordug <vbordug@ru.mvista.com>,
davem@davemloft.net, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, netdev@vger.kernel.org
Subject: Re: [PATCH 1/3] net: fs_enet: merge NAPI RX and NAPI TX
Date: Wed, 24 Aug 2016 15:25:26 +0200 [thread overview]
Message-ID: <50194d12-e052-428d-2639-3b9c3d9e7d13@c-s.fr> (raw)
In-Reply-To: <1472044021.14381.71.camel@edumazet-glaptop3.roam.corp.google.com>
Le 24/08/2016 à 15:07, Eric Dumazet a écrit :
> On Wed, 2016-08-24 at 12:36 +0200, Christophe Leroy wrote:
>> Initially, a NAPI TX routine has been implemented separately from
>> NAPI RX, as done on the freescale/gianfar driver.
>>
>> By merging NAPI RX and NAPI TX, we reduce the amount of TX completion
>> interrupts.
>>
>> Handling of the budget in association with TX interrupts is based on
>> indications provided at https://wiki.linuxfoundation.org/networking/napi
>>
>> At the same time, we fix an issue in the handling of fep->tx_free:
>>
>> It is only when fep->tx_free goes up to MAX_SKB_FRAGS that
>> we need to wake up the queue. There is no need to call
>> netif_wake_queue() at every packet successfully transmitted.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>> ---
>> .../net/ethernet/freescale/fs_enet/fs_enet-main.c | 259 +++++++++------------
>> drivers/net/ethernet/freescale/fs_enet/fs_enet.h | 16 +-
>> drivers/net/ethernet/freescale/fs_enet/mac-fcc.c | 57 ++---
>> drivers/net/ethernet/freescale/fs_enet/mac-fec.c | 57 ++---
>> drivers/net/ethernet/freescale/fs_enet/mac-scc.c | 57 ++---
>> 5 files changed, 153 insertions(+), 293 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
>> index 61fd486..7cd3ef9 100644
>> --- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
>> +++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
>> @@ -79,8 +79,8 @@ static void skb_align(struct sk_buff *skb, int align)
>> skb_reserve(skb, align - off);
>> }
>>
>> -/* NAPI receive function */
>> -static int fs_enet_rx_napi(struct napi_struct *napi, int budget)
>> +/* NAPI function */
>> +static int fs_enet_napi(struct napi_struct *napi, int budget)
>> {
>> struct fs_enet_private *fep = container_of(napi, struct fs_enet_private, napi);
>> struct net_device *dev = fep->ndev;
>> @@ -90,9 +90,100 @@ static int fs_enet_rx_napi(struct napi_struct *napi, int budget)
>> int received = 0;
>> u16 pkt_len, sc;
>> int curidx;
>> + int dirtyidx, do_wake, do_restart;
>>
>> - if (budget <= 0)
>> - return received;
>> + spin_lock(&fep->tx_lock);
>> + bdp = fep->dirty_tx;
>> +
>> + /* clear status bits for napi*/
>> + (*fep->ops->napi_clear_event)(dev);
>> +
>> + do_wake = do_restart = 0;
>> + while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) {
>
> I am afraid you could live lock here on SMP.
>
> You should make sure you do not loop forever, not assuming cpu is faster
> than NIC.
This peace of code is pure move of existing code below
-static int fs_enet_tx_napi(struct napi_struct *napi, int budget)
-{
- struct fs_enet_private *fep = container_of(napi, struct fs_enet_private,
- napi_tx);
- struct net_device *dev = fep->ndev;
- cbd_t __iomem *bdp;
- struct sk_buff *skb;
- int dirtyidx, do_wake, do_restart;
- u16 sc;
- int has_tx_work = 0;
-
- spin_lock(&fep->tx_lock);
- bdp = fep->dirty_tx;
-
- /* clear TX status bits for napi*/
- (*fep->ops->napi_clear_tx_event)(dev);
-
- do_wake = do_restart = 0;
- while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) {
- dirtyidx = bdp - fep->tx_bd_base;
What should be done instead (any exemple driver doing it the good way ?)
and should that change be part of that patch or a another new one ?
Christophe
>
>
>
>> + dirtyidx = bdp - fep->tx_bd_base;
>> +
>> + if (fep->tx_free == fep->tx_ring)
>> + break;
>> +
>> + skb = fep->tx_skbuff[dirtyidx];
>> +
>> + /*
>> + * Check for errors.
>> + */
>> + if (sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
>> + BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) {
>> +
>> + if (sc & BD_ENET_TX_HB) /* No heartbeat */
>> + fep->stats.tx_heartbeat_errors++;
>> + if (sc & BD_ENET_TX_LC) /* Late collision */
>> + fep->stats.tx_window_errors++;
>> + if (sc & BD_ENET_TX_RL) /* Retrans limit */
>> + fep->stats.tx_aborted_errors++;
>> + if (sc & BD_ENET_TX_UN) /* Underrun */
>> + fep->stats.tx_fifo_errors++;
>> + if (sc & BD_ENET_TX_CSL) /* Carrier lost */
>> + fep->stats.tx_carrier_errors++;
>> +
>> + if (sc & (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
>> + fep->stats.tx_errors++;
>> + do_restart = 1;
>> + }
>> + } else
>> + fep->stats.tx_packets++;
>> +
>> + if (sc & BD_ENET_TX_READY) {
>> + dev_warn(fep->dev,
>> + "HEY! Enet xmit interrupt and TX_READY.\n");
>> + }
>> +
>> + /*
>> + * Deferred means some collisions occurred during transmit,
>> + * but we eventually sent the packet OK.
>> + */
>> + if (sc & BD_ENET_TX_DEF)
>> + fep->stats.collisions++;
>> +
>> + /* unmap */
>> + if (fep->mapped_as_page[dirtyidx])
>> + dma_unmap_page(fep->dev, CBDR_BUFADDR(bdp),
>> + CBDR_DATLEN(bdp), DMA_TO_DEVICE);
>> + else
>> + dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
>> + CBDR_DATLEN(bdp), DMA_TO_DEVICE);
>> +
>> + /*
>> + * Free the sk buffer associated with this last transmit.
>> + */
>> + if (skb) {
>> + dev_kfree_skb(skb);
>> + fep->tx_skbuff[dirtyidx] = NULL;
>> + }
>> +
>> + /*
>> + * Update pointer to next buffer descriptor to be transmitted.
>> + */
>> + if ((sc & BD_ENET_TX_WRAP) == 0)
>> + bdp++;
>> + else
>> + bdp = fep->tx_bd_base;
>> +
>> + /*
>> + * Since we have freed up a buffer, the ring is no longer
>> + * full.
>> + */
>> + if (++fep->tx_free == MAX_SKB_FRAGS)
>> + do_wake = 1;
>> + }
>> +
>> + fep->dirty_tx = bdp;
>> +
>> + if (do_restart)
>> + (*fep->ops->tx_restart)(dev);
>> +
>> + spin_unlock(&fep->tx_lock);
>> +
>> + if (do_wake)
>> + netif_wake_queue(dev);
>>
next prev parent reply other threads:[~2016-08-24 15:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-24 10:36 [PATCH 0/3] Optimisation of fs_enet ethernet driver Christophe Leroy
2016-08-24 10:36 ` [PATCH 1/3] net: fs_enet: merge NAPI RX and NAPI TX Christophe Leroy
2016-08-24 13:07 ` Eric Dumazet
2016-08-24 13:15 ` Eric Dumazet
2016-08-24 13:25 ` Christophe Leroy [this message]
2016-08-24 10:36 ` [PATCH 2/3] net: fs_enet: don't unmap DMA when packet len is below copybreak Christophe Leroy
2016-08-24 10:36 ` [PATCH 3/3] net: fs_enet: make rx_copybreak value configurable Christophe Leroy
2016-08-24 17:14 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50194d12-e052-428d-2639-3b9c3d9e7d13@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=pantelis.antoniou@gmail.com \
--cc=vbordug@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®