From: Francois Rigaut <frigaut@mso.anu.edu.au>
To: Greg KH <gregkh@linuxfoundation.org>,
Matthew Garrett <mjg59@srcf.ucam.org>,
matt.fleming@intel.com, linux-efi@vger.kernel.org,
linux-kernel@vger.kernel.org, x86@kernel.org,
linux-pci@vger.kernel.org, bhelgaas@google.com
Subject: Re: [PATCH V2 1/4] EFI: Stash ROMs if they're not in the PCI BAR
Date: Fri, 03 Aug 2012 08:54:46 +1000 [thread overview]
Message-ID: <501B0536.6070001@mso.anu.edu.au> (raw)
In-Reply-To: <501B01ED.9080309@mso.anu.edu.au>
Seth,
I have put the osx system.log, which is the only file where I can see
mux and AGC related message, at http://maumae.net/retina/system.log
Thanks,
Francois
On 03/08/12 08:40, Francois Rigaut wrote:
> Hi Seth,
>
> Sorry for the belated response. On Oz time here.
> I don't have a /var/log/kernel.log !
> Let me make sure of something:
> This switcher code is to be run on osx, no? That's where gfxcardstatus
> lives and where I can effect the card switch. Just to make sure.
> So I'm running osx mountain lion, and the only thing I see in the logs
> when I switch cards (using gfxcardstatus) is what I pasted below. and
> you're right, it was not in message.log, but system.log (it was late).
> I just went through the whole thing again.
> Am I missing something?
> Cheers,
> Francois
>
> On 03/08/12 02:12, Seth Forshee wrote:
>> On Fri, Aug 03, 2012 at 12:57:33AM +1000, Francois Rigaut wrote:
>>> Greg, Seth,
>>>
>>> Here is what the message.log shows:
>>>
>>> switching to the HD4000 (integrated):
>>>
>>> Aug 3 00:49:55 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x42803c0
>>> Aug 3 00:49:55 poliahu.ctio.noao.edu WindowServer[79]:
>>> CGXMuxAcknowledge: Posting glitchless acknowledge
>>> Aug 3 00:49:55 poliahu.ctio.noao.edu WindowServer[79]:
>>> MPAccessSurfaceForDisplayDevice: Set up page flip mode on display
>>> 0x042803c0 device: 0x10c678320 isBackBuffered: 0 numComp: 1 numDisp: 3
>>> Aug 3 00:49:55 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x42803c0
>>> Aug 3 00:49:55 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x3f003d
>>> Aug 3 00:49:55 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x3f003e
>>> Aug 3 00:49:55 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x3f003f
>>>
>>> switching to the nvidia (discrete):
>>>
>>> Aug 3 00:50:35 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x42803c0
>>> Aug 3 00:50:35 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x3f003d
>>> Aug 3 00:50:35 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x3f003e
>>> Aug 3 00:50:35 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x3f003f
>>> Aug 3 00:50:35 poliahu.ctio.noao.edu WindowServer[79]:
>>> CGXMuxAcknowledge: Posting glitchless acknowledge
>>> Aug 3 00:50:35 poliahu.ctio.noao.edu WindowServer[79]:
>>> MPAccessSurfaceForDisplayDevice: Set up page flip mode on display
>>> 0x042803c0 device: 0x10c678320 isBackBuffered: 0 numComp: 1 numDisp: 3
>>> Aug 3 00:50:35 poliahu.ctio.noao.edu WindowServer[79]: Received
>>> display connect changed for display 0x42803c0
>>>
>>> Hope that helps.
>> Thanks for trying it out, but it's not really what I was hoping for. I
>> get a bunch of messages similar to these in /var/log/kernel.log, mixed
>> in with a lot of other stuff.
>>
>> AGC:: setMuxRegister:1666 (728, 1, 1)
>> AGC:: setMuxRegister:1666 (710, 1, 4)
>> AGC:: getMuxRegister:1647 (716, 1) = 1
>>
>> I don't even have message.log. You don't have a kernel.log? Do you see
>> any messages like those if you run dmesg?
>>
>> Seth
next prev parent reply other threads:[~2012-08-02 22:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-27 16:52 Matthew Garrett
2012-07-27 16:52 ` [PATCH V2 2/4] PCI: Add pcibios_add_device Matthew Garrett
2012-07-27 16:52 ` [PATCH V2 3/4] PCI: Add support for non-BAR ROMs Matthew Garrett
2012-07-29 21:49 ` [PATCH] Fix priority of non-BAR ROM data David Woodhouse
2012-07-29 21:53 ` Matthew Garrett
2012-08-01 14:20 ` Bjorn Helgaas
2012-08-01 14:26 ` Matthew Garrett
2012-07-27 16:52 ` [PATCH V2 4/4] X86: Use PCI setup data Matthew Garrett
2012-07-31 22:32 ` [PATCH V2 1/4] EFI: Stash ROMs if they're not in the PCI BAR Greg KH
2012-08-01 16:54 ` Matthew Garrett
2012-08-01 23:21 ` Greg KH
2012-08-02 4:02 ` Seth Forshee
2012-08-02 10:34 ` Greg KH
2012-08-02 14:57 ` Francois Rigaut
2012-08-02 16:12 ` Seth Forshee
2012-08-02 22:40 ` Francois Rigaut
2012-08-02 22:54 ` Francois Rigaut [this message]
2012-08-03 4:53 ` Seth Forshee
[not found] ` <501BD1FC.9020601@mso.anu.edu.au>
[not found] ` <20120803141421.GA8165@thinkpad-t410>
[not found] ` <501C7C1D.5010903@mso.anu.edu.au>
[not found] ` <20120804035844.GA31711@thinkpad-t410>
2012-08-04 5:44 ` Francois Rigaut
2012-08-06 13:49 ` Seth Forshee
2012-08-06 22:50 ` Francois Rigaut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=501B0536.6070001@mso.anu.edu.au \
--to=frigaut@mso.anu.edu.au \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=matt.fleming@intel.com \
--cc=mjg59@srcf.ucam.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome