From: "Brad House" <brad_mssw@gentoo.org>
To: <linux-kernel@vger.kernel.org>
Cc: <tony@vroon.org>
Subject: [BUG 2.6.0-test10] SCSI update in CSET 1.1437.1.2 caused 'Badness'
Date: Mon, 24 Nov 2003 00:31:26 -0500 (EST) [thread overview]
Message-ID: <50478.68.105.173.45.1069651886.squirrel@mail.mainstreetsoftworks.com> (raw)
A user noticed this oddness while using -test10 that he did
not see while using -test9. This error does not seem to affect
anything. His e-mail is tony@vroon.org if you need more info
from him.
Reverting CSET 1.1437.1.2 fixed his problem below:
http://linux.bkbits.net:8080/linux-2.5/patch@1.1437.1.2?nav=index.html|tags|ChangeSet@1.1350.1.2..|cset@1.1437.1.2
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
(scsi0:A:2:0): refuses WIDE negotiation. Using 8bit transfers
(scsi0:A:2): 20.000MB/s transfers (20.000MHz, offset 16)
(scsi0:A:4:0): refuses WIDE negotiation. Using 8bit transfers
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 7)
Badness in kobject_get at lib/kobject.c:439
Call Trace:
[<c0238bad>] kobject_get+0x4d/0x50
[<c0291278>] get_device+0x18/0x30
[<c02d285c>] scsi_device_get+0x2c/0x80
[<c02d294e>] __scsi_iterate_devices+0x3e/0x70
[<c02d6409>] scsi_run_host_queues+0x19/0x50
[<c02f5f14>] ahc_linux_release_simq+0x94/0xd0
[<c02f2552>] ahc_linux_dv_thread+0x1e2/0x230
[<c02f2370>] ahc_linux_dv_thread+0x0/0x230
[<c01070a9>] kernel_thread_helper+0x5/0xc
Vendor: COMPAQPC Model: DDYS-T09170N Rev: B96H
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Vendor: FUJITSU Model: MAP3367NP Rev: 0106
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Vendor: YAMAHA Model: CRW2100S Rev: 1.0N
Type: CD-ROM ANSI SCSI revision: 02
SCSI device sda: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 71775284 512-byte hdwr sectors (36749 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host0/bus0/target1/lun0: p1 p2 p3
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi0, channel 0, id 2, lun 0, type 5
Attached scsi generic sg3 at scsi0, channel 0, id 4, lun 0, type 5
next reply other threads:[~2003-11-24 5:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-24 5:31 Brad House [this message]
2003-11-24 7:49 ` Andrew Morton
2003-11-24 8:09 ` Mike Anderson
2003-11-24 15:40 ` Tony Vroon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50478.68.105.173.45.1069651886.squirrel@mail.mainstreetsoftworks.com \
--to=brad_mssw@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tony@vroon.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®