From: Alexander Holler <holler@ahsoftware.de>
To: linux-kernel@vger.kernel.org
Cc: Jacob Shin <jacob.shin@amd.com>,
"H. Peter Anvin" <hpa@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: x86: Regression in 3.6.4, bisected to "Exclude E820_RESERVED regions..."
Date: Mon, 29 Oct 2012 14:19:32 +0100 [thread overview]
Message-ID: <508E8264.8070807@ahsoftware.de> (raw)
In-Reply-To: <508E58FD.2000707@ahsoftware.de>
Am 29.10.2012 11:22, schrieb Alexander Holler:
> Hello,
>
> I've just bisected a problem with 3.6.4.
>
> I had to revert commit 54ce8ce298f382a06186cb4672ad6aa090b050b6
> (1bbbbe779aabe1f0768c2bf8f8c0a5583679b54a in mainline), otherwise my box
> didn't boot.
>
> I can't provide any output, because I don't see if that commit is
> applied. ;)
That sentence missed an 'any'. But I've now attached a serial, here is
the output:
------
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.4 (root@krabat.ahsoftware) (gcc version
4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #265 SMP Mon Oct 29 14:07:32
CET 2012
[ 0.000000] Command line: ro root=/dev/sdb2 rootfstype=ext4
enforcing=0 cgroup_disable=memory vga=0x346 video=vesafb:mtrr:3,ywrap
radeon.modeset=0 earlycon=uart8250,io,0x3f8,115200n8
earlyprintk=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d7cafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d7cb000-0x000000009dd6afff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dd6b000-0x000000009dd7afff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009dd7b000-0x000000009e0e6fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e0e7000-0x000000009e669fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e66a000-0x000000009e66afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e66b000-0x000000009e870fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e871000-0x000000009ec8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ec90000-0x000000009eff3fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009eff4000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x00000001beffffff] usable
[ 0.000000] Early serial console at I/O port 0x3f8 (options '115200n8')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.4 (root@krabat.ahsoftware) (gcc version
4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #265 SMP Mon Oct 29 14:07:32
CET 2012
[ 0.000000] Command line: ro root=/dev/sdb2 rootfstype=ext4
enforcing=0 cgroup_disable=memory vga=0x346 video=vesafb:mtrr:3,ywrap
radeon.modeset=0 earlycon=uart8250,io,0x3f8,115200n8
earlyprintk=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d7cafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d7cb000-0x000000009dd6afff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dd6b000-0x000000009dd7afff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009dd7b000-0x000000009e0e6fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e0e7000-0x000000009e669fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e66a000-0x000000009e66afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e66b000-0x000000009e870fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e871000-0x000000009ec8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ec90000-0x000000009eff3fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009eff4000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x00000001beffffff] usable
[ 0.000000] Early serial console at I/O port 0x3f8 (options '115200n8')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI 2.7 present.
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1bf000 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0x1bf000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9effffff]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9effffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1beffffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1beffffff]
[ 0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory
[ 0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory
[ 0.000000] Pid: 0, comm: swapper Not tainted 3.6.4 #265
[ 0.000000] Pid: 0, comm: swapper Not tainted 3.6.4 #265
[ 0.000000] Call Trace:
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff813e2a76>] ? panic+0xbf/0x1bb
[ 0.000000] [<ffffffff813e2a76>] ? panic+0xbf/0x1bb
[ 0.000000] [<ffffffff813cfa3f>] ? alloc_low_page+0x54/0x7f
[ 0.000000] [<ffffffff813cfa3f>] ? alloc_low_page+0x54/0x7f
[ 0.000000] [<ffffffff8169c987>] ? phys_pud_init+0x1a9/0x25a
[ 0.000000] [<ffffffff8169c987>] ? phys_pud_init+0x1a9/0x25a
[ 0.000000] [<ffffffff8169caf7>] ?
kernel_physical_mapping_init+0xbf/0x17f
[ 0.000000] [<ffffffff8169caf7>] ?
kernel_physical_mapping_init+0xbf/0x17f
[ 0.000000] [<ffffffff813cf6de>] ? init_memory_mapping+0x2de/0x5b0
[ 0.000000] [<ffffffff813cf6de>] ? init_memory_mapping+0x2de/0x5b0
[ 0.000000] [<ffffffff81671da2>] ? setup_arch+0x672/0x8b0
[ 0.000000] [<ffffffff81671da2>] ? setup_arch+0x672/0x8b0
[ 0.000000] [<ffffffff81670815>] ? start_kernel+0x86/0x2ef
[ 0.000000] [<ffffffff81670815>] ? start_kernel+0x86/0x2ef
------
Don't ask me, why some lines are twice there. I assume it's because I
have earlycon and earlyprintk enabled in the command line. I've never
used the serial before to debug a kernel on x86, I just have experience
debugging ARMs using the serial. ;)
Regards,
Alexander
next prev parent reply other threads:[~2012-10-29 13:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-29 10:22 Alexander Holler
2012-10-29 13:19 ` Alexander Holler [this message]
2012-10-29 16:59 ` Greg Kroah-Hartman
2012-10-29 18:10 ` Alexander Holler
2012-10-29 18:32 ` Greg Kroah-Hartman
2012-10-29 19:53 ` Alexander Holler
2012-10-29 23:01 ` Greg Kroah-Hartman
2012-10-30 1:51 ` Alexander Holler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=508E8264.8070807@ahsoftware.de \
--to=holler@ahsoftware.de \
--cc=gregkh@linuxfoundation.org \
--cc=hpa@linux.intel.com \
--cc=jacob.shin@amd.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome