mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stephen Warren <swarren@wwwdotorg.org>
To: Laxman Dewangan <ldewangan@nvidia.com>
Cc: broonie@opensource.wolfsonmicro.com, grant.likely@secretlab.ca,
	rob.herring@calxeda.com, spi-devel-general@lists.sourceforge.net,
	linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH V2] spi: tegra: add spi driver for SLINK controller
Date: Mon, 29 Oct 2012 13:14:45 -0600	[thread overview]
Message-ID: <508ED5A5.3000703@wwwdotorg.org> (raw)
In-Reply-To: <1351531104-1604-1-git-send-email-ldewangan@nvidia.com>

On 10/29/2012 11:18 AM, Laxman Dewangan wrote:
> Tegra20/Tegra30 supports the spi interface through its SLINK
> controller. Add spi driver for SLINK controller.

> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig

> +config SPI_TEGRA20_SLINK
> +	tristate "Nvidia Tegra20/Tegra30 SLINK Controller"
> +	depends on ARCH_TEGRA && TEGRA20_APB_DMA

I think it depends on DMAENGINE, not the specific driver now, doesn't it?

> +static unsigned tegra_slink_fill_tx_fifo_from_client_txbuf(
> +	struct tegra_slink_data *tspi, struct spi_transfer *t)

> +	if (tspi->is_packed) {
> +		fifo_words_left = tx_empty_count * tspi->words_per_32bit;
> +		written_words = min(fifo_words_left, tspi->curr_dma_words);
> +		nbytes = written_words * tspi->bytes_per_word;
> +		max_n_32bit = DIV_ROUND_UP(nbytes, 4);
> +		for (count = 0; count < max_n_32bit; count++) {
> +			x = 0;
> +			for (i = 0; (i < 4) && nbytes; i++, nbytes--)
> +				x |= (*tx_buf++) << (i*8);
> +			tegra_slink_writel(tspi, x, SLINK_TX_FIFO);
> +		}
> +	} else {
> +		max_n_32bit = min(tspi->curr_dma_words,  tx_empty_count);
> +		written_words = max_n_32bit;
> +		nbytes = written_words * tspi->bytes_per_word;
> +		for (count = 0; count < max_n_32bit; count++) {
> +			x = 0;
> +			for (i = 0; nbytes && (i < tspi->bytes_per_word);
> +							i++, nbytes--)
> +				x |= ((*tx_buf++) << i*8);
> +			tegra_slink_writel(tspi, x, SLINK_TX_FIFO);
> +		}
> +	}

The if and the else there are basically identical now. Can't the else
branch simply be replaced by the if branch? At most I think the
difference comes down to max_n_32bit v.s. fifo_words_left calculations
being slight different; everything else is the same.

I suppose this isn't a big deal though; we could clean it up later if
necessary.

> +static int tegra_slink_start_cpu_based_transfer(
> +		struct tegra_slink_data *tspi, struct spi_transfer *t)

> +	tspi->is_curr_dma_xfer = false;
> +	if (tspi->is_packed) {
> +		val |= SLINK_PACKED;
> +		tegra_slink_writel(tspi, val, SLINK_DMA_CTL);
> +		udelay(1);
> +		wmb();

Why the udelay() and wmb()?

> +static int tegra_slink_runtime_suspend(struct device *dev)
> +{
> +	struct spi_master *master = dev_get_drvdata(dev);
> +	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
> +
> +	tegra_slink_clk_unprepare(tspi);
> +	return 0;
> +}
> +
> +static int tegra_slink_runtime_resume(struct device *dev)
> +{
> +	struct spi_master *master = dev_get_drvdata(dev);
> +	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
> +
> +	return tegra_slink_clk_prepare(tspi);
> +}

Why not move the body of tegra_slink_clk_{un,prepare} inside those
functions, since they're only called from those functions?

> +MODULE_ALIAS("platform:tegra_slink-slink");

I think that's a typo.

  reply	other threads:[~2012-10-29 19:14 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-29 17:18 Laxman Dewangan
2012-10-29 19:14 ` Stephen Warren [this message]
2012-10-30  5:43   ` Laxman Dewangan
2012-10-30 15:14     ` Mark Brown
2012-10-30  5:56   ` Laxman Dewangan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=508ED5A5.3000703@wwwdotorg.org \
    --to=swarren@wwwdotorg.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=grant.likely@secretlab.ca \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=rob.herring@calxeda.com \
    --cc=spi-devel-general@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome