From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758648Ab3BGNJk (ORCPT ); Thu, 7 Feb 2013 08:09:40 -0500 Received: from mx1.redhat.com ([209.132.183.28]:19854 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758413Ab3BGNJg (ORCPT ); Thu, 7 Feb 2013 08:09:36 -0500 Date: Thu, 7 Feb 2013 15:13:13 +0200 From: "Michael S. Tsirkin" To: netdev@vger.kernel.org Cc: Eilon Greenstein , Jeff Kirsher , Jesse Brandeburg , Bruce Allan , Carolyn Wyborny , Don Skidmore , Greg Rose , Peter P Waskiewicz Jr , Alex Duyck , John Ronciak , Tushar Dave , Jitendra Kalsaria , Sony Chacko , linux-driver@qlogic.com, John Fastabend , "David S. Miller" , Jacob Keller , linux-kernel@vger.kernel.org, e1000-devel@lists.sourceforge.net, bhutchings@solarflare.com, eric.dumazet@gmail.com Subject: [PATCHv2-net-3.8 2/3] qlcnic: set gso_type Message-ID: <50a60e1293901965901edb46ae49e52da1d469d5.1360236441.git.mst@redhat.com> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-Mutt-Fcc: =sent Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org qlcnic set gso_size but not gso type. This leads to crashes in macvtap. Signed-off-by: Michael S. Tsirkin --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 6f82812..09aa310 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -986,8 +986,13 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, th->seq = htonl(seq_number); length = skb->len; - if (adapter->flags & QLCNIC_FW_LRO_MSS_CAP) + if (adapter->flags & QLCNIC_FW_LRO_MSS_CAP) { skb_shinfo(skb)->gso_size = qlcnic_get_lro_sts_mss(sts_data1); + if (skb->protocol == htons(ETH_P_IPV6)) + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + else + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + } if (vid != 0xffff) __vlan_hwaccel_put_tag(skb, vid); -- MST