Hi Shuai, On Wed, 9 Oct 2024, Shuai Xue wrote: > 在 2024/10/9 07:18, Ilkka Koskinen 写道: >> Load DesignWare PCIe PMU driver automatically if the system has a PCI >> bridge by Ampere. >> >> Signed-off-by: Ilkka Koskinen >> --- >> drivers/perf/dwc_pcie_pmu.c | 10 ++++++++++ >> 1 file changed, 10 insertions(+) >> >> diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c >> index 3581d916d851..d752168733cf 100644 >> --- a/drivers/perf/dwc_pcie_pmu.c >> +++ b/drivers/perf/dwc_pcie_pmu.c >> @@ -782,6 +782,16 @@ static void __exit dwc_pcie_pmu_exit(void) >> module_init(dwc_pcie_pmu_init); >> module_exit(dwc_pcie_pmu_exit); >> +static const struct pci_device_id dwc_pcie_pmu_table[] = { >> + { >> + PCI_DEVICE(PCI_VENDOR_ID_AMPERE, PCI_ANY_ID), > > Hi, Ilkka, > > Does all Ampere PCI bridge use this IP? I have checked Altra, AltraMax and AmpereOne SoCs and they all do. Unfortunately, I don't have access to eMAG at this point. If the IP will be changed and the feature won't be supported in the future SoCs, I can certainly change the logic to accept only certain SoCs. Cheers, Ilkka > > Best Regards, > Shuai > > >