From: Patrice CHOTARD <patrice.chotard@st.com>
To: Sachin Kamat <sachin.kamat@linaro.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linus.walleij@linaro.org" <linus.walleij@linaro.org>,
"patches@linaro.org" <patches@linaro.org>
Subject: Re: [PATCH 1/5] pinctrl: abx500: Staticize some symbols
Date: Tue, 19 Mar 2013 09:28:26 +0100 [thread overview]
Message-ID: <514821AA.2060201@st.com> (raw)
In-Reply-To: <1363674681-4015-1-git-send-email-sachin.kamat@linaro.org>
On 03/19/2013 07:31 AM, Sachin Kamat wrote:
> These symbols are used only in this file. Without this patch
> we get the following warnings:
> drivers/pinctrl/pinctrl-abx500.c:520:5: warning:
> symbol 'abx500_gpio_request' was not declared. Should it be static?
> drivers/pinctrl/pinctrl-abx500.c:527:6: warning:
> symbol 'abx500_gpio_free' was not declared. Should it be static?
> drivers/pinctrl/pinctrl-abx500.c:614:5: warning:
> symbol 'abx500_gpio_request_enable' was not declared. Should it be static?
> drivers/pinctrl/pinctrl-abx500.c:714:5: warning:
> symbol 'abx500_pin_config_get' was not declared. Should it be static?
> drivers/pinctrl/pinctrl-abx500.c:721:5: warning:
> symbol 'abx500_pin_config_set' was not declared. Should it be static?
>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> Cc: Patrice Chotard <patrice.chotard@st.com>
> ---
> This series is compile tested against linux-next tree (20130319).
> ---
> drivers/pinctrl/pinctrl-abx500.c | 10 +++++-----
> 1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
> index 0cf3fa4..9b8db91 100644
> --- a/drivers/pinctrl/pinctrl-abx500.c
> +++ b/drivers/pinctrl/pinctrl-abx500.c
> @@ -517,14 +517,14 @@ static inline void abx500_gpio_dbg_show_one(struct seq_file *s,
> #define abx500_gpio_dbg_show NULL
> #endif
>
> -int abx500_gpio_request(struct gpio_chip *chip, unsigned offset)
> +static int abx500_gpio_request(struct gpio_chip *chip, unsigned offset)
> {
> int gpio = chip->base + offset;
>
> return pinctrl_request_gpio(gpio);
> }
>
> -void abx500_gpio_free(struct gpio_chip *chip, unsigned offset)
> +static void abx500_gpio_free(struct gpio_chip *chip, unsigned offset)
> {
> int gpio = chip->base + offset;
>
> @@ -611,7 +611,7 @@ static void abx500_pmx_disable(struct pinctrl_dev *pctldev,
> dev_dbg(pct->dev, "disable group %s, %u pins\n", g->name, g->npins);
> }
>
> -int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
> +static int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
> struct pinctrl_gpio_range *range,
> unsigned offset)
> {
> @@ -711,14 +711,14 @@ static const struct pinctrl_ops abx500_pinctrl_ops = {
> .pin_dbg_show = abx500_pin_dbg_show,
> };
>
> -int abx500_pin_config_get(struct pinctrl_dev *pctldev,
> +static int abx500_pin_config_get(struct pinctrl_dev *pctldev,
> unsigned pin,
> unsigned long *config)
> {
> return -ENOSYS;
> }
>
> -int abx500_pin_config_set(struct pinctrl_dev *pctldev,
> +static int abx500_pin_config_set(struct pinctrl_dev *pctldev,
> unsigned pin,
> unsigned long config)
> {
Acked-by: Patrice Chotard <patrice.chotard@st.com>
next prev parent reply other threads:[~2013-03-19 8:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-19 6:31 Sachin Kamat
2013-03-19 6:31 ` [PATCH 2/5] pinctrl: ab8500: " Sachin Kamat
2013-03-19 8:41 ` Patrice CHOTARD
2013-04-09 7:55 ` Linus Walleij
2013-03-19 6:31 ` [PATCH 3/5] pinctrl: ab9540: " Sachin Kamat
2013-03-19 8:42 ` Patrice CHOTARD
2013-04-09 7:57 ` Linus Walleij
2013-03-19 6:31 ` [PATCH 4/5] pinctrl: ab8540: " Sachin Kamat
2013-03-19 8:43 ` Patrice CHOTARD
2013-04-09 7:59 ` Linus Walleij
2013-03-19 6:31 ` [PATCH 5/5] pinctrl: ab8505: " Sachin Kamat
2013-03-19 8:43 ` Patrice CHOTARD
2013-04-09 8:00 ` Linus Walleij
2013-03-19 8:28 ` Patrice CHOTARD [this message]
2013-04-04 4:25 ` [PATCH 1/5] pinctrl: abx500: " Sachin Kamat
2013-04-09 7:52 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=514821AA.2060201@st.com \
--to=patrice.chotard@st.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@linaro.org \
--cc=sachin.kamat@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome