Re: [PATCH] DTS at91sam9x5ek: i2c1 and i2c2 conflict with macb and lcd

[Nicolas Ferre <nicolas.ferre@atmel.com>]

On 03/20/2013 12:22 PM, Richard Genoud :
> on at91sam9x5ek, macb0 is enabled, so it conflicts with i2c2 (PB4)
> same for i2c1, (conflicts with LCD).
> Moreover, only i2c0 is used on this board.
> 
> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

And pushed to at91-3.10-dt branch.

Thanks,

> ---
>  arch/arm/boot/dts/at91sam9x5ek.dtsi |    8 --------
>  1 files changed, 0 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
> index 8a7cf1d..1128565 100644
> --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
> @@ -61,14 +61,6 @@
>  				status = "okay";
>  			};
>  
> -			i2c1: i2c@f8014000 {
> -				status = "okay";
> -			};
> -
> -			i2c2: i2c@f8018000 {
> -				status = "okay";
> -			};
> -
>  			pinctrl@fffff400 {
>  				mmc0 {
>  					pinctrl_board_mmc0: mmc0-board {
> 


-- 
Nicolas Ferre