[PATCH v4 1/4] PCI: rockchip: drop 2.5 GT/s defines

[Geraldo Nascimento <geraldogabriel@gmail.com>]

Drop the 2.5 GT/s Link Speed defines from Rockchip PCIe header
definitions. The reason is that Shawn Lin from Rockchip has
reiterated that there may be danger of "catastrophic failure"
in using their PCIe with 5.0 GT/s speeds.

While Rockchip has done so informally without issuing a proper
errata, and the particulars are thus unknown, this may cause
data loss or worse.

This change is corroborated by RK3399 official datasheet [1], which
states maximum link speed for this platform is 2.5 GT/s.

[1] https://opensource.rock-chips.com/images/d/d7/Rockchip_RK3399_Datasheet_V2.1-20200323.pdf

Fixes: 956cd99b35a8 ("PCI: rockchip: Separate common code from RC driver")
Link: https://lore.kernel.org/all/ffd05070-9879-4468-94e3-b88968b4c21b@rock-chips.com/
Cc: stable@vger.kernel.org
Reported-by: Dragan Simic <dsimic@manjaro.org>
Reported-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
---
 drivers/pci/controller/pcie-rockchip.h | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/pci/controller/pcie-rockchip.h b/drivers/pci/controller/pcie-rockchip.h
index 3e82a69b9c00..b5da15601b58 100644
--- a/drivers/pci/controller/pcie-rockchip.h
+++ b/drivers/pci/controller/pcie-rockchip.h
@@ -42,7 +42,6 @@
 #define   PCIE_CLIENT_MODE_RC			HWORD_SET_BIT(0x0040)
 #define   PCIE_CLIENT_MODE_EP			HWORD_CLR_BIT(0x0040)
 #define   PCIE_CLIENT_GEN_SEL_1			HWORD_CLR_BIT(0x0080)
-#define   PCIE_CLIENT_GEN_SEL_2			HWORD_SET_BIT(0x0080)
 #define PCIE_CLIENT_LEGACY_INT_CTRL	(PCIE_CLIENT_BASE + 0x0c)
 #define   PCIE_CLIENT_INT_IN_ASSERT		HWORD_SET_BIT(0x0002)
 #define   PCIE_CLIENT_INT_IN_DEASSERT		HWORD_CLR_BIT(0x0002)
@@ -197,8 +196,6 @@
 	(((x) & PCIE_CORE_PL_CONF_LS_MASK) == PCIE_CORE_PL_CONF_LS_READY)
 #define PCIE_LINK_UP(x) \
 	(((x) & PCIE_CLIENT_LINK_STATUS_MASK) == PCIE_CLIENT_LINK_STATUS_UP)
-#define PCIE_LINK_IS_GEN2(x) \
-	(((x) & PCIE_CORE_PL_CONF_SPEED_MASK) == PCIE_CORE_PL_CONF_SPEED_5G)
 
 #define RC_REGION_0_ADDR_TRANS_H		0x00000000
 #define RC_REGION_0_ADDR_TRANS_L		0x00000000
-- 
2.52.0