From: Marco Minetti <marco.minetti@novetica.org>
To: linux-kernel@vger.kernel.org
Subject: [PATCH] Add bth Asus S400A device support for Atheros AR3012
Date: Fri, 07 Jun 2013 08:39:49 +0200 [thread overview]
Message-ID: <51B18035.3060607@novetica.org> (raw)
Hi,
I've been applying the following patchs seamlessly into kernel 3.9 and
3.10 for enabling bluetooth support on Asus S400CA notebook. No
regressions detected so far.
Could it be directly pushed into official branchs?
Thanks,
Marco Minetti
-----------------------------------------------------------------------------
Kernel 3.10
Signed-off-by: Marco Minetti <marco.minetti@novetica.org>
---
diff -rupN a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
--- a/drivers/bluetooth/ath3k.c 2013-05-08 05:58:03.000000000 +0200
+++ b/drivers/bluetooth/ath3k.c 2013-05-11 08:41:05.727487838 +0200
@@ -90,6 +90,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
+ { USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x0489, 0xe04d) },
/* Atheros AR5BBU12 with sflash firmware */
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
diff -rupN a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
--- a/drivers/bluetooth/btusb.c 2013-05-08 05:58:03.000000000 +0200
+++ b/drivers/bluetooth/btusb.c 2013-05-11 08:39:57.667486015 +0200
@@ -148,6 +148,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
---
--------------------------------------------------------------------------------------
Kernel 3.9
Signed-off-by: Marco Minetti <marco.minetti@novetica.org>
---
diff -rupN a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
--- a/drivers/bluetooth/ath3k.c 2013-05-08 05:58:03.000000000 +0200
+++ b/drivers/bluetooth/ath3k.c 2013-05-11 08:41:05.727487838 +0200
@@ -90,6 +90,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
+ { USB_DEVICE(0x13d3, 0x3402) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff -rupN a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
--- a/drivers/bluetooth/btusb.c 2013-05-08 05:58:03.000000000 +0200
+++ b/drivers/bluetooth/btusb.c 2013-05-11 08:39:57.667486015 +0200
@@ -148,6 +148,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
---
reply other threads:[~2013-06-07 6:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B18035.3060607@novetica.org \
--to=marco.minetti@novetica.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®