From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: <linux-pm@vger.kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <eduardo.valentin@ti.com>,
<linux-samsung-soc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <amit.kachhap@gmail.com>,
Kukjin Kim <kgene.kim@samsung.com>
Subject: Re: [PATCH V7 08/30] thermal: exynos: Add missing definations and code cleanup
Date: Mon, 24 Jun 2013 11:00:04 -0400 [thread overview]
Message-ID: <51C85EF4.6060509@ti.com> (raw)
In-Reply-To: <1372071051-3167-9-git-send-email-amit.daniel@samsung.com>
[-- Attachment #1: Type: text/plain, Size: 5036 bytes --]
On 24-06-2013 06:50, Amit Daniel Kachhap wrote:
> This patch adds some extra register bitfield definations and cleans
> up the code to prepare for moving register macros and definations inside
> the TMU data section. In this code cleanup the TMU enable bit is correctly used
> as bit0 and bit1 is taken care which is reserve bit.
>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> drivers/thermal/samsung/exynos_tmu.c | 62 +++++++++++++++++++++++++---------
> 1 files changed, 46 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 5df04a1..fa33a48 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -43,9 +43,12 @@
>
> #define EXYNOS_TMU_TRIM_TEMP_MASK 0xff
> #define EXYNOS_TMU_GAIN_SHIFT 8
> +#define EXYNOS_TMU_GAIN_MASK 0xf
> #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
> -#define EXYNOS_TMU_CORE_ON 3
> -#define EXYNOS_TMU_CORE_OFF 2
> +#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f
> +#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf
> +#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
> +#define EXYNOS_TMU_CORE_EN_SHIFT 0
> #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50
>
> /* Exynos4210 specific registers */
> @@ -63,6 +66,7 @@
> #define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
> #define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
> #define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
> +#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
> #define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
>
> /* Exynos5250 and Exynos4412 specific registers */
> @@ -72,17 +76,30 @@
> #define EXYNOS_EMUL_CON 0x80
>
> #define EXYNOS_TRIMINFO_RELOAD 0x1
> +#define EXYNOS_TRIMINFO_SHIFT 0x0
> +#define EXYNOS_TMU_RISE_INT_MASK 0x111
> +#define EXYNOS_TMU_RISE_INT_SHIFT 0
> +#define EXYNOS_TMU_FALL_INT_MASK 0x111
> +#define EXYNOS_TMU_FALL_INT_SHIFT 12
> #define EXYNOS_TMU_CLEAR_RISE_INT 0x111
> #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
> -#define EXYNOS_MUX_ADDR_VALUE 6
> -#define EXYNOS_MUX_ADDR_SHIFT 20
> #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
> +#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
> +
> +#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
> +#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
> +#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
> +#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
> +#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
> +#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
> +#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
>
> #define EFUSE_MIN_VALUE 40
> #define EFUSE_MAX_VALUE 100
>
> #ifdef CONFIG_THERMAL_EMULATION
> #define EXYNOS_EMUL_TIME 0x57F0
> +#define EXYNOS_EMUL_TIME_MASK 0xffff
> #define EXYNOS_EMUL_TIME_SHIFT 16
> #define EXYNOS_EMUL_DATA_SHIFT 8
> #define EXYNOS_EMUL_DATA_MASK 0xFF
> @@ -261,24 +278,37 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
> mutex_lock(&data->lock);
> clk_enable(data->clk);
>
> - con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
> - pdata->gain << EXYNOS_TMU_GAIN_SHIFT;
> + con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
>
> - if (data->soc == SOC_ARCH_EXYNOS) {
> - con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT;
> - con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
> + if (pdata->reference_voltage) {
> + con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK <<
> + EXYNOS_TMU_REF_VOLTAGE_SHIFT);
> + con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
> + }
> +
> + if (pdata->gain) {
> + con &= ~(EXYNOS_TMU_GAIN_MASK << EXYNOS_TMU_GAIN_SHIFT);
> + con |= (pdata->gain << EXYNOS_TMU_GAIN_SHIFT);
> + }
> +
> + if (pdata->noise_cancel_mode) {
> + con &= ~(EXYNOS_TMU_TRIP_MODE_MASK <<
> + EXYNOS_TMU_TRIP_MODE_SHIFT);
> + con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
> }
>
> if (on) {
> - con |= EXYNOS_TMU_CORE_ON;
> - interrupt_en = pdata->trigger_level3_en << 12 |
> - pdata->trigger_level2_en << 8 |
> - pdata->trigger_level1_en << 4 |
> - pdata->trigger_level0_en;
> + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
> + interrupt_en =
> + pdata->trigger_level3_en << EXYNOS_TMU_INTEN_RISE3_SHIFT |
> + pdata->trigger_level2_en << EXYNOS_TMU_INTEN_RISE2_SHIFT |
> + pdata->trigger_level1_en << EXYNOS_TMU_INTEN_RISE1_SHIFT |
> + pdata->trigger_level0_en << EXYNOS_TMU_INTEN_RISE0_SHIFT;
> if (pdata->threshold_falling)
> - interrupt_en |= interrupt_en << 16;
> + interrupt_en |=
> + interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
> } else {
> - con |= EXYNOS_TMU_CORE_OFF;
> + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
> interrupt_en = 0; /* Disable all interrupts */
> }
> writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
next prev parent reply other threads:[~2013-06-24 15:00 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-24 10:50 [PATCH V7 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 01/30] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 02/30] thermal: exynos: Use ARCH_HAS_BANDGAP config to know the supported soc's Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 03/30] thermal: exynos: Remove un-necessary CPU_THERMAL dependency Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 04/30] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 05/30] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 06/30] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 07/30] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 08/30] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-06-24 15:00 ` Eduardo Valentin [this message]
2013-06-24 10:50 ` [PATCH V7 09/30] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-06-24 15:33 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 10/30] thermal: exynos: Move register definitions from driver to data file Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 11/30] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 12/30] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 13/30] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 14/30] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 15/30] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 16/30] thermal: exynos: Make the zone handling use trip information Amit Daniel Kachhap
2013-06-24 15:41 ` Eduardo Valentin
2013-06-25 8:33 ` amit daniel kachhap
2013-06-25 11:39 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-25 13:36 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 17/30] thermal: exynos: Remove non DT based support Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 18/30] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-06-24 15:50 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 19/30] thermal: exynos: Add TMU features to check instead of using SOC type Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 20/30] thermal: exynos: use device resource management infrastructure Amit Daniel Kachhap
2013-06-25 11:41 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 21/30] thermal: exynos: Add support to access common register for multistance Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 22/30] thermal: exynos: Add driver support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-06-24 19:43 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 23/30] thermal: exynos: Add thermal configuration data " Amit Daniel Kachhap
2013-06-24 16:37 ` Eduardo Valentin
2013-06-26 1:24 ` Jungseok Lee
2013-08-07 9:53 ` Naveen Krishna Ch
2013-06-24 10:50 ` [PATCH V7 24/30] thermal: exynos: Fix to set the second point correction value Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 25/30] thermal: exynos: Add hardware mode thermal calibration support Amit Daniel Kachhap
2013-06-24 19:39 ` Eduardo Valentin
2013-06-25 9:12 ` amit daniel kachhap
2013-06-25 11:46 ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-25 13:38 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 26/30] thermal: exynos: Support for TMU regulator defined at device tree Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 27/30] ARM: dts: thermal: exynos: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-06-24 17:05 ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 28/30] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 29/30] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 30/30] arm: exynos: enable ARCH_HAS_BANDGAP Amit Daniel Kachhap
2013-06-24 17:11 ` Eduardo Valentin
2013-06-24 17:13 ` [PATCH V7 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Kukjin Kim
2013-06-24 19:51 ` Eduardo Valentin
2013-06-25 11:53 ` amit daniel kachhap
2013-06-28 5:19 ` amit daniel kachhap
2013-06-28 5:30 ` Zhang, Rui
2013-07-08 23:13 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C85EF4.6060509@ti.com \
--to=eduardo.valentin@ti.com \
--cc=amit.daniel@samsung.com \
--cc=amit.kachhap@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome