From: Valdis.Kletnieks@vt.edu
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Kylene Hall <kjhall@us.ibm.com>,
linux-kernel@vger.kernel.org, tpm@selhorst.net
Subject: Re: 2.6.23-rc1-mm1 - seems OK on Dell Latitude D820, except for tpm_tis
Date: Fri, 27 Jul 2007 00:00:32 -0400 [thread overview]
Message-ID: <5208.1185508832@turing-police.cc.vt.edu> (raw)
In-Reply-To: Your message of "Wed, 25 Jul 2007 20:37:37 PDT." <20070725203737.85871711.akpm@linux-foundation.org>
[-- Attachment #1.1: Type: text/plain, Size: 1567 bytes --]
On Wed, 25 Jul 2007 20:37:37 PDT, Andrew Morton said:
> I can't imagine what we did to break tpm_tis, sorry. Nothing has changed
> in there for ages.
>
> Perhaps something broke at the bus level. It would be useful to add
OK, so I made a more intrusive printk-all-over patch to track what it was
doing, and got several tests in under 2.6.22-rc6-mm1 and 2.6.23-rc1-mm1.
I've attached:
debug.22-rc6-mm1 - things apparently working under the previous kernel.
debug.rc1-a - this one complained but didn't time out for long times. I've
only seen 23-rc1-mm1 *not* take timeouts this one time. Oddness.
debug.rc1-b - this one complained, and took 2 120-second waits
debug.patch - the printf's I added, for those who want to follow along..
Apparently, things go pear-shaped in tis_tpm_send(), when they get to the
'if (chip->vendor.irq)' - under 22-rc6-mm1, we never got into this code,
because earlier initialization complained it couldn't get IRQ8. Now, we
get IRQ3, and apparently get into this if statement, and then spend 120
seconds while wait_for_stat() times out. So the root cause does look like
it's this IRQ8/IRQ3 issue.
I'll try to find time to do a bisect on -rc1-mm1 tomorrow to track down
what exactly did this.
(And remember to keep in mind the very real possibility that in fact, both
releases are broken in different ways - I've never actually *done* anything
with the chip further than "the driver loads". Anybody got a very basic
userspace program to test-harness /dev/tpm0 (open, do a few test calls, close)?
[-- Attachment #1.2: debug.22-rc6-mm1 --]
[-- Type: text/plain , Size: 8092 bytes --]
[ 32.324000] tpm_tis_pnp_init: start=4275306496, len=20480
[ 32.324000] tpm_tis 00:0f: 1.2 TPM (device-id 0x1001, rev-id 2)
[ 32.324000] tpm_tis 00:0f: TPM interface capabilities (0x97):
[ 32.324000] tpm_tis 00:0f: Command Ready Int Support
[ 32.324000] tpm_tis 00:0f: Interrupt Level Low
[ 32.324000] tpm_tis 00:0f: Locality Change Int Support
[ 32.324000] tpm_tis 00:0f: Sts Valid Int Support
[ 32.324000] tpm_tis 00:0f: Data Avail Int Support
[ 32.324000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.324000] tis_send ready_for_command
[ 32.324000] tis_send wait for tis_ready
[ 32.330000] tis_send ready to go
[ 32.330000] tis_send after iowrite8 loop
[ 32.330000] tis_send after second wait_for_stat
[ 32.330000] tis_send after second tis_status
[ 32.330000] tis_send after last iowrite8
[ 32.330000] tis_send after 3rd wait_for_stat
[ 32.330000] tis_send after 3rd tis_status
[ 32.330000] tis_send after STS_GO
[ 32.336000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.336000] tis_send ready_for_command
[ 32.336000] tis_send wait for tis_ready
[ 32.342000] tis_send ready to go
[ 32.342000] tis_send after iowrite8 loop
[ 32.342000] tis_send after second wait_for_stat
[ 32.342000] tis_send after second tis_status
[ 32.342000] tis_send after last iowrite8
[ 32.342000] tis_send after 3rd wait_for_stat
[ 32.342000] tis_send after 3rd tis_status
[ 32.342000] tis_send after STS_GO
[ 32.348000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.348000] tis_send ready_for_command
[ 32.348000] tis_send wait for tis_ready
[ 32.354000] tis_send ready to go
[ 32.354000] tis_send after iowrite8 loop
[ 32.354000] tis_send after second wait_for_stat
[ 32.354000] tis_send after second tis_status
[ 32.354000] tis_send after last iowrite8
[ 32.354000] tis_send after 3rd wait_for_stat
[ 32.354000] tis_send after 3rd tis_status
[ 32.354000] tis_send after STS_GO
[ 32.360000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.360000] tis_send ready_for_command
[ 32.360000] tis_send wait for tis_ready
[ 32.366000] tis_send ready to go
[ 32.366000] tis_send after iowrite8 loop
[ 32.366000] tis_send after second wait_for_stat
[ 32.366000] tis_send after second tis_status
[ 32.366000] tis_send after last iowrite8
[ 32.366000] tis_send after 3rd wait_for_stat
[ 32.366000] tis_send after 3rd tis_status
[ 32.366000] tis_send after STS_GO
[ 32.372000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.372000] tis_send ready_for_command
[ 32.372000] tis_send wait for tis_ready
[ 32.378000] tis_send ready to go
[ 32.378000] tis_send after iowrite8 loop
[ 32.378000] tis_send after second wait_for_stat
[ 32.378000] tis_send after second tis_status
[ 32.378000] tis_send after last iowrite8
[ 32.378000] tis_send after 3rd wait_for_stat
[ 32.378000] tis_send after 3rd tis_status
[ 32.378000] tis_send after STS_GO
[ 32.384000] tpm_tis 00:0f: Unable to request irq: 8 for probe
[ 32.384000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.384000] tis_send ready_for_command
[ 32.384000] tis_send wait for tis_ready
[ 32.390000] tis_send ready to go
[ 32.390000] tis_send after iowrite8 loop
[ 32.390000] tis_send after second wait_for_stat
[ 32.390000] tis_send after second tis_status
[ 32.390000] tis_send after last iowrite8
[ 32.390000] tis_send after 3rd wait_for_stat
[ 32.390000] tis_send after 3rd tis_status
[ 32.390000] tis_send after STS_GO
[ 32.396000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.396000] tis_send ready_for_command
[ 32.396000] tis_send wait for tis_ready
[ 32.402000] tis_send ready to go
[ 32.402000] tis_send after iowrite8 loop
[ 32.402000] tis_send after second wait_for_stat
[ 32.402000] tis_send after second tis_status
[ 32.402000] tis_send after last iowrite8
[ 32.402000] tis_send after 3rd wait_for_stat
[ 32.402000] tis_send after 3rd tis_status
[ 32.402000] tis_send after STS_GO
[ 32.408000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.408000] tis_send ready_for_command
[ 32.408000] tis_send wait for tis_ready
[ 32.414000] tis_send ready to go
[ 32.414000] tis_send after iowrite8 loop
[ 32.414000] tis_send after second wait_for_stat
[ 32.414000] tis_send after second tis_status
[ 32.414000] tis_send after last iowrite8
[ 32.414000] tis_send after 3rd wait_for_stat
[ 32.414000] tis_send after 3rd tis_status
[ 32.414000] tis_send after STS_GO
[ 32.420000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.420000] tis_send ready_for_command
[ 32.420000] tis_send wait for tis_ready
[ 32.426000] tis_send ready to go
[ 32.426000] tis_send after iowrite8 loop
[ 32.426000] tis_send after second wait_for_stat
[ 32.426000] tis_send after second tis_status
[ 32.426000] tis_send after last iowrite8
[ 32.426000] tis_send after 3rd wait_for_stat
[ 32.426000] tis_send after 3rd tis_status
[ 32.426000] tis_send after STS_GO
[ 32.432000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.432000] tis_send ready_for_command
[ 32.432000] tis_send wait for tis_ready
[ 32.438000] tis_send ready to go
[ 32.438000] tis_send after iowrite8 loop
[ 32.438000] tis_send after second wait_for_stat
[ 32.438000] tis_send after second tis_status
[ 32.438000] tis_send after last iowrite8
[ 32.438000] tis_send after 3rd wait_for_stat
[ 32.438000] tis_send after 3rd tis_status
[ 32.438000] tis_send after STS_GO
[ 32.444000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.444000] tis_send ready_for_command
[ 32.444000] tis_send wait for tis_ready
[ 32.450000] tis_send ready to go
[ 32.450000] tis_send after iowrite8 loop
[ 32.450000] tis_send after second wait_for_stat
[ 32.450000] tis_send after second tis_status
[ 32.450000] tis_send after last iowrite8
[ 32.450000] tis_send after 3rd wait_for_stat
[ 32.450000] tis_send after 3rd tis_status
[ 32.450000] tis_send after STS_GO
[ 32.456000] in tpm_tis_send buffer=18446604435840957488 len=22
[ 32.456000] tis_send ready_for_command
[ 32.456000] tis_send wait for tis_ready
[ 32.462000] tis_send ready to go
[ 32.462000] tis_send after iowrite8 loop
[ 32.462000] tis_send after second wait_for_stat
[ 32.462000] tis_send after second tis_status
[ 32.462000] tis_send after last iowrite8
[ 32.462000] tis_send after 3rd wait_for_stat
[ 32.462000] tis_send after 3rd tis_status
[ 32.462000] tis_send after STS_GO
[ 32.468000] in tpm_tis_send buffer=18446604435840957472 len=22
[ 32.468000] tis_send ready_for_command
[ 32.468000] tis_send wait for tis_ready
[ 32.474000] tis_send ready to go
[ 32.474000] tis_send after iowrite8 loop
[ 32.474000] tis_send after second wait_for_stat
[ 32.474000] tis_send after second tis_status
[ 32.474000] tis_send after last iowrite8
[ 32.474000] tis_send after 3rd wait_for_stat
[ 32.474000] tis_send after 3rd tis_status
[ 32.474000] tis_send after STS_GO
[ 32.480000] in tpm_tis_send buffer=18446604435840957472 len=22
[ 32.480000] tis_send ready_for_command
[ 32.480000] tis_send wait for tis_ready
[ 32.486000] tis_send ready to go
[ 32.486000] tis_send after iowrite8 loop
[ 32.486000] tis_send after second wait_for_stat
[ 32.486000] tis_send after second tis_status
[ 32.486000] tis_send after last iowrite8
[ 32.486000] tis_send after 3rd wait_for_stat
[ 32.486000] tis_send after 3rd tis_status
[ 32.486000] tis_send after STS_GO
[ 32.492000] in tpm_tis_send buffer=18446604435840957528 len=10
[ 32.492000] tis_send ready_for_command
[ 32.492000] tis_send wait for tis_ready
[ 32.498000] tis_send ready to go
[ 32.498000] tis_send after iowrite8 loop
[ 32.498000] tis_send after second wait_for_stat
[ 32.498000] tis_send after second tis_status
[ 32.498000] tis_send after last iowrite8
[ 32.498000] tis_send after 3rd wait_for_stat
[ 32.498000] tis_send after 3rd tis_status
[ 32.498000] tis_send after STS_GO
[-- Attachment #1.3: debug.rc1-a --]
[-- Type: text/plain , Size: 2395 bytes --]
[ 1357.392943] tpm_tis_pnp_init: start=4275306496, len=20480
[ 1357.394579] SELinux: initialized (dev securityfs, type securityfs), not configured for labeling
[ 1357.394615] tpm_tis 00:0f: 1.2 TPM (device-id 0x1001, rev-id 2)
[ 1357.394620] tpm_tis 00:0f: TPM interface capabilities (0x97):
[ 1357.394622] tpm_tis 00:0f: Command Ready Int Support
[ 1357.394624] tpm_tis 00:0f: Interrupt Level Low
[ 1357.394625] tpm_tis 00:0f: Locality Change Int Support
[ 1357.394627] tpm_tis 00:0f: Sts Valid Int Support
[ 1357.394628] tpm_tis 00:0f: Data Avail Int Support
[ 1357.394652] tpm0 (IRQ 3) handled a spurious interrupt
[ 1357.394669] in tpm_tis_send buffer=18446604435799350304 len=22
[ 1357.394675] tis_send ready_for_command
[ 1357.394677] tis_send wait for tis_ready
[ 1357.394680] tis_send ready to go
[ 1357.394696] tis_send after iowrite8 loop
[ 1357.394701] tis_send after second wait_for_stat
[ 1357.394704] tis_send after second tis_status
[ 1357.394705] tis_send after last iowrite8
[ 1357.394709] tis_send after 3rd wait_for_stat
[ 1357.394712] tis_send after 3rd tis_status
[ 1357.394713] tis_send after STS_GO
[ 1357.394714] tis_send before last wait_for_stat
[ 1358.966290] in tpm_tis_send buffer=18446604435799350304 len=22
[ 1358.966296] tis_send ready_for_command
[ 1358.966298] tis_send wait for tis_ready
[ 1358.966303] tis_send ready to go
[ 1358.966319] tis_send after iowrite8 loop
[ 1358.966324] tis_send after second wait_for_stat
[ 1358.966327] tis_send after second tis_status
[ 1358.966328] tis_send after last iowrite8
[ 1358.966331] tis_send after 3rd wait_for_stat
[ 1358.966334] tis_send after 3rd tis_status
[ 1358.966336] tis_send after STS_GO
[ 1358.966337] tis_send before last wait_for_stat
[ 1358.966345] tis_send after last wait_for_stat
[ 1358.966347] tis_send before last tis_ready
[ 1358.966348] tis_send after last tis_ready
[ 1358.966354] tis_send after release_locality
[ 1358.966357] tpm_tis 00:0f: tpm_transmit: tpm_send: error -62
[ 1358.966359] in tpm_tis_send buffer=18446604435799350360 len=10
[ 1358.966364] tis_send ready_for_command
[ 1358.966365] tis_send wait for tis_ready
[ 1358.966373] tis_send timed out waiting for command_ready
[ 1358.966374] tis_send before last tis_ready
[ 1358.966375] tis_send after last tis_ready
[ 1358.966379] tis_send after release_locality
[ 1358.966380] tpm_tis 00:0f: tpm_transmit: tpm_send: error -62
[-- Attachment #1.4: debug.rc1-b --]
[-- Type: text/plain , Size: 2377 bytes --]
[20013.799019] tpm_tis_pnp_init: start=4275306496, len=20480
[20013.804544] tpm_tis 00:0f: 1.2 TPM (device-id 0x1001, rev-id 2)
[20013.804701] tpm_tis 00:0f: TPM interface capabilities (0x97):
[20013.804761] tpm_tis 00:0f: Command Ready Int Support
[20013.804820] tpm_tis 00:0f: Interrupt Level Low
[20013.804875] tpm_tis 00:0f: Locality Change Int Support
[20013.804948] tpm_tis 00:0f: Sts Valid Int Support
[20013.805005] tpm_tis 00:0f: Data Avail Int Support
[20013.805083] tpm0 (IRQ 3) handled a spurious interrupt
[20013.805203] in tpm_tis_send buffer=18446604435978689568 len=22
[20013.805267] tis_send ready to go
[20013.805334] tis_send after iowrite8 loop
[20013.805390] tis_send after second wait_for_stat
[20013.805446] tis_send after second tis_status
[20013.805499] tis_send after last iowrite8
[20013.805553] tis_send after 3rd wait_for_stat
[20013.805608] tis_send after 3rd tis_status
[20013.805661] tis_send after STS_GO
[20013.805712] tis_send before last wait_for_stat
[20133.740241] tis_send after last wait_for_stat
[20133.740251] tis_send before last tis_ready
[20133.740256] tis_send after last tis_ready
[20133.740261] tis_send after release_locality
[20133.740267] tpm_tis 00:0f: tpm_transmit: tpm_send: error -62
[20133.740274] in tpm_tis_send buffer=18446604435978689568 len=22
[20133.740282] tis_send ready_for_command
[20133.740285] tis_send wait for tis_ready
[20135.739111] tis_send timed out waiting for command_ready
[20135.739121] tis_send before last tis_ready
[20135.739127] tis_send after last tis_ready
[20135.739132] tis_send after release_locality
[20135.739138] tpm_tis 00:0f: tpm_transmit: tpm_send: error -62
[20135.739144] in tpm_tis_send buffer=18446604435978689624 len=10
[20135.739153] tis_send ready to go
[20135.739162] tis_send after iowrite8 loop
[20135.739167] tis_send after second wait_for_stat
[20135.739172] tis_send after second tis_status
[20135.739175] tis_send after last iowrite8
[20135.739179] tis_send after 3rd wait_for_stat
[20135.739184] tis_send after 3rd tis_status
[20135.739189] tis_send after STS_GO
[20135.739193] tis_send before last wait_for_stat
[20255.671378] tis_send after last wait_for_stat
[20255.671387] tis_send before last tis_ready
[20255.671394] tis_send after last tis_ready
[20255.671399] tis_send after release_locality
[20255.671405] tpm_tis 00:0f: tpm_transmit: tpm_send: error -62
[-- Attachment #1.5: debug.patch --]
[-- Type: application/x-patch , Size: 3487 bytes --]
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
next prev parent reply other threads:[~2007-07-27 4:00 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-25 11:03 2.6.23-rc1-mm1 Andrew Morton
2007-07-25 12:25 ` 2.6.23-rc1-mm1 Cedric Le Goater
2007-07-25 17:23 ` 2.6.23-rc1-mm1 Len Brown
2007-07-25 18:58 ` 2.6.23-rc1-mm1 Andrew Morton
2007-07-25 19:13 ` 2.6.23-rc1-mm1 Torsten Kaiser
2007-07-25 20:22 ` 2.6.23-rc1-mm1 Torsten Kaiser
2007-07-25 20:36 ` 2.6.23-rc1-mm1 Andrew Morton
2007-07-25 21:52 ` 2.6.23-rc1-mm1 Torsten Kaiser
2007-07-26 7:25 ` 2.6.23-rc1-mm1 Andrew Morton
2007-07-26 17:54 ` 2.6.23-rc1-mm1 Torsten Kaiser
2007-07-28 14:03 ` 2.6.23-rc1-mm1 Torsten Kaiser
2007-07-25 23:26 ` 2.6.23-rc1-mm1 Len Brown
2007-07-26 9:41 ` 2.6.23-rc1-mm1 Mel Gorman
2007-07-26 13:53 ` 2.6.23-rc1-mm1 Cedric Le Goater
2007-07-25 12:40 ` 2.6.23-rc1-mm1 Cedric Le Goater
2007-07-25 20:05 ` 2.6.23-rc1-mm1 Andrew Morton
2007-07-25 12:55 ` 2.6.23-rc1-mm1 Cedric Le Goater
2007-07-25 13:48 ` 2.6.23-rc1-mm1: chipsfb_pci_suspend problem Rafael J. Wysocki
2007-07-25 20:22 ` Andrew Morton
2007-07-25 22:45 ` Pavel Machek
2007-07-25 13:36 ` [-mm patch] one e1000 driver should be enough for everyone Adrian Bunk
2007-07-25 13:48 ` Jeff Garzik
2007-07-25 14:46 ` Adrian Bunk
2007-07-25 15:05 ` Jeff Garzik
2007-07-25 15:21 ` Kok, Auke
2007-07-25 15:23 ` Jeff Garzik
2007-07-25 20:50 ` Andrew Morton
2007-07-25 16:32 ` 2.6.23-rc1-mm1 Michal Piotrowski
2007-07-25 21:56 ` 2.6.23-rc1-mm1 Andrew Morton
2007-07-25 16:36 ` 2.6.23-rc1-mm1 -- mostly fails to build Andy Whitcroft
2007-07-25 17:04 ` Sam Ravnborg
2007-07-25 18:06 ` 2.6.23-rc1-mm1: SCSI_SRP_ATTRS compile error Adrian Bunk
2007-07-26 10:49 ` FUJITA Tomonori
2007-07-25 22:41 ` 2.6.23-rc1-mm1 -- mostly fails to build Andy Whitcroft
2007-07-26 5:56 ` Andrew Morton
2007-07-26 17:53 ` Yinghai Lu
2007-07-25 18:15 ` 2.6.23-rc1-mm1: net/ipv4/fib_trie.c compile error Adrian Bunk
2007-07-25 18:22 ` 2.6.23-rc1-mm1: reiser4 <-> lzo " Adrian Bunk
2007-07-25 18:44 ` Edward Shishkin
2007-07-27 12:35 ` Edward Shishkin
2007-07-27 15:11 ` Richard Purdie
2007-07-25 18:48 ` 2.6.23-rc1-mm1 Michal Piotrowski
2007-07-25 18:53 ` 2.6.23-rc1-mm1 Sam Ravnborg
2007-07-25 19:18 ` 2.6.23-rc1-mm1 H. Peter Anvin
2007-07-25 19:21 ` 2.6.23-rc1-mm1 Sam Ravnborg
2007-07-25 20:58 ` 2.6.23-rc1-mm1 Gabriel C
2007-07-25 21:05 ` 2.6.23-rc1-mm1 Gabriel C
2007-07-25 21:11 ` 2.6.23-rc1-mm1 H. Peter Anvin
2007-07-25 21:13 ` 2.6.23-rc1-mm1 Gabriel C
2007-07-25 21:18 ` 2.6.23-rc1-mm1 H. Peter Anvin
2007-07-25 21:26 ` 2.6.23-rc1-mm1 Gabriel C
2007-07-26 0:07 ` 2.6.23-rc1-mm1 Greg KH
2007-07-26 0:28 ` 2.6.23-rc1-mm1 Andrew Morton
2007-07-26 1:55 ` 2.6.23-rc1-mm1 Dave Young
2007-07-26 2:23 ` 2.6.23-rc1-mm1 Andrew Morton
2007-07-26 20:18 ` 2.6.23-rc1-mm1 Dave Hansen
2007-07-25 20:42 ` 2.6.23-rc1-mm1 - drivers/char/nozomi.c overflow in implicit constant conversion , warnings Gabriel C
2007-07-26 5:42 ` Greg KH
2007-07-25 21:01 ` 2.6.23-rc1-mm1: m32r is_init() compile error Adrian Bunk
2007-07-25 21:42 ` sukadev
2007-07-25 21:17 ` 2.6.23-rc1-mm1: git-kgdb breaks sh compilation Adrian Bunk
2007-07-26 1:45 ` Paul Mundt
2007-07-25 22:03 ` 2.6.23-rc1-mm1 - seems OK on Dell Latitude D820, except for tpm_tis Valdis.Kletnieks
2007-07-26 3:37 ` Andrew Morton
2007-07-27 4:00 ` Valdis.Kletnieks [this message]
2007-07-27 13:28 ` Valdis.Kletnieks
2007-07-27 18:07 ` Andrew Morton
2007-07-27 19:44 ` Valdis.Kletnieks
2007-07-27 22:43 ` Bjorn Helgaas
2007-07-30 18:09 ` Bjorn Helgaas
2007-07-30 23:53 ` Valdis.Kletnieks
2007-07-31 18:48 ` Valdis.Kletnieks
2007-07-31 20:01 ` Bjorn Helgaas
2007-07-31 21:31 ` Valdis.Kletnieks
2007-07-31 23:05 ` Bjorn Helgaas
2007-07-26 5:26 ` [-mm patch] DMA engine kconfig improvements Adrian Bunk
2007-08-04 2:15 ` Dan Williams
2007-08-10 0:43 ` Adrian Bunk
2007-08-15 23:36 ` Nelson, Shannon
2007-07-26 12:11 ` [PATCH] sparsemem: ensure we initialise the node mapping for SPARSEMEM_STATIC Andy Whitcroft
2007-07-26 12:58 ` 2.6.23-rc1-mm1 sparsemem_vmemamp fix KAMEZAWA Hiroyuki
2007-07-26 14:39 ` Andy Whitcroft
2007-07-26 14:44 ` Andy Whitcroft
2007-07-27 13:28 ` [-mm patch] xtensa console.c: remove duplicate #include Frederik Deweerdt
2007-07-28 15:44 ` NETPOLL=y , NETDEVICES=n compile error ( Re: 2.6.23-rc1-mm1 ) Gabriel C
2007-07-28 17:26 ` Andrew Morton
2007-07-28 18:42 ` Gabriel C
2007-07-31 8:32 ` Jarek Poplawski
2007-07-31 10:14 ` Gabriel C
2007-07-31 11:44 ` Jason Wessel
2007-07-31 12:47 ` Jarek Poplawski
2007-07-31 12:17 ` Jarek Poplawski
2007-07-31 15:05 ` Gabriel C
2007-08-01 9:59 ` Jarek Poplawski
2007-08-02 2:02 ` Matt Mackall
2007-08-02 9:00 ` Jarek Poplawski
2007-08-02 15:59 ` Matt Mackall
2007-08-03 7:30 ` Jarek Poplawski
2007-08-02 9:36 ` Sam Ravnborg
2007-08-02 10:32 ` Satyam Sharma
2007-08-02 11:40 ` Satyam Sharma
2007-08-02 11:40 ` Jarek Poplawski
2007-08-02 11:56 ` Satyam Sharma
2007-08-02 12:52 ` Jarek Poplawski
2007-08-06 11:51 ` [PATCH] docs: note about select in kconfig-language.txt Jarek Poplawski
2007-07-28 16:36 ` DCA=n , INTEL_IOATDMA=y compile error ( Re: 2.6.23-rc1-mm1 ) Gabriel C
2007-07-28 16:47 ` sound/pci/ac97/ac97_patch.h - declared 'static' but never defined warnings " Gabriel C
2007-07-28 17:07 ` mm/sparse.c compile error " Gabriel C
2007-07-28 17:30 ` Andrew Morton
2007-07-30 12:16 ` Andy Whitcroft
2007-07-28 19:32 ` [PATCH -mm] Fix libata warnings with CONFIG_PM=n Gabriel C
2007-07-29 14:57 ` [-mm patch] make hugetlbfs_read() static Adrian Bunk
2007-07-29 14:57 ` [-mm patch] fs/ecryptfs/: make code static Adrian Bunk
2007-07-29 14:58 ` [-mm patch] make struct sdio_dev_attrs[] static Adrian Bunk
2007-07-29 19:29 ` Pierre Ossman
2007-07-29 14:58 ` [-mm patch] MTD onenand_sim.c: make struct info static Adrian Bunk
2007-07-29 14:58 ` [-mm patch] make scsi_host_link_pm_policy() static Adrian Bunk
2007-07-29 14:58 ` [-mm patch] USB: make dev_attr_authorized_default static Adrian Bunk
2007-07-31 19:13 ` Inaky Perez-Gonzalez
2007-07-29 14:59 ` [-mm patch] kernel/printk.c: make 2 variables static Adrian Bunk
2007-07-29 16:51 ` Randy Dunlap
2007-07-29 14:59 ` [-mm patch] export v4l2_int_device_{,un}register Adrian Bunk
2007-07-29 14:59 ` [-mm patch] kernel/pid.c: remove unused exports Adrian Bunk
2007-07-29 15:00 ` [-mm patch] security/ cleanups Adrian Bunk
2007-07-30 11:47 ` James Morris
2007-07-29 15:49 ` 2.6.23-rc1-mm1 Grant Wilson
2007-07-30 9:58 ` 2.6.23-rc1-mm1 Dave Young
2007-07-30 18:27 ` 2.6.23-rc1-mm1 Andrew Morton
2007-07-30 18:42 ` 2.6.23-rc1-mm1 Christoph Hellwig
2007-07-30 22:18 ` 2.6.23-rc1-mm1 Satyam Sharma
2007-07-31 1:21 ` 2.6.23-rc1-mm1 Dave Young
2007-08-01 15:24 ` 2.6.23-rc1-mm1 - loopback mount of files fails loop-use-unlocked_ioctl.patch Valdis.Kletnieks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5208.1185508832@turing-police.cc.vt.edu \
--to=valdis.kletnieks@vt.edu \
--cc=akpm@linux-foundation.org \
--cc=kjhall@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tpm@selhorst.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®