Re: [PATCH 3/5] remoteproc: st: Simplify with dev_err_probe

[Patrice CHOTARD <patrice.chotard@foss.st.com>]

On 1/11/25 19:42, Krzysztof Kozlowski wrote:
> Use dev_err_probe() to make error code handling simpler and handle
> deferred probe.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  drivers/remoteproc/st_remoteproc.c | 44 +++++++++++++++++---------------------
>  1 file changed, 20 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
> index 5df99bae7131a832c0c03c9bf8619812d9eb570d..d1f35e8a83ba525613ed4e54d2269b7e9f427e46 100644
> --- a/drivers/remoteproc/st_remoteproc.c
> +++ b/drivers/remoteproc/st_remoteproc.c
> @@ -290,26 +290,23 @@ static int st_rproc_parse_dt(struct platform_device *pdev)
>  	if (ddata->config->sw_reset) {
>  		ddata->sw_reset = devm_reset_control_get_exclusive(dev,
>  								   "sw_reset");
> -		if (IS_ERR(ddata->sw_reset)) {
> -			dev_err(dev, "Failed to get S/W Reset\n");
> -			return PTR_ERR(ddata->sw_reset);
> -		}
> +		if (IS_ERR(ddata->sw_reset))
> +			return dev_err_probe(dev, PTR_ERR(ddata->sw_reset),
> +					     "Failed to get S/W Reset\n");
>  	}
>  
>  	if (ddata->config->pwr_reset) {
>  		ddata->pwr_reset = devm_reset_control_get_exclusive(dev,
>  								    "pwr_reset");
> -		if (IS_ERR(ddata->pwr_reset)) {
> -			dev_err(dev, "Failed to get Power Reset\n");
> -			return PTR_ERR(ddata->pwr_reset);
> -		}
> +		if (IS_ERR(ddata->pwr_reset))
> +			return dev_err_probe(dev, PTR_ERR(ddata->pwr_reset),
> +					     "Failed to get Power Reset\n");
>  	}
>  
>  	ddata->clk = devm_clk_get(dev, NULL);
> -	if (IS_ERR(ddata->clk)) {
> -		dev_err(dev, "Failed to get clock\n");
> -		return PTR_ERR(ddata->clk);
> -	}
> +	if (IS_ERR(ddata->clk))
> +		return dev_err_probe(dev, PTR_ERR(ddata->clk),
> +				     "Failed to get clock\n");
>  
>  	err = of_property_read_u32(np, "clock-frequency", &ddata->clk_rate);
>  	if (err) {
> @@ -318,10 +315,9 @@ static int st_rproc_parse_dt(struct platform_device *pdev)
>  	}
>  
>  	ddata->boot_base = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> -	if (IS_ERR(ddata->boot_base)) {
> -		dev_err(dev, "Boot base not found\n");
> -		return PTR_ERR(ddata->boot_base);
> -	}
> +	if (IS_ERR(ddata->boot_base))
> +		return dev_err_probe(dev, PTR_ERR(ddata->boot_base),
> +				     "Boot base not found\n");
>  
>  	err = of_property_read_u32_index(np, "st,syscfg", 1,
>  					 &ddata->boot_offset);
> @@ -395,32 +391,32 @@ static int st_rproc_probe(struct platform_device *pdev)
>  		 */
>  		chan = mbox_request_channel_byname(&ddata->mbox_client_vq0, "vq0_rx");
>  		if (IS_ERR(chan)) {
> -			dev_err(&rproc->dev, "failed to request mbox chan 0\n");
> -			ret = PTR_ERR(chan);
> +			ret = dev_err_probe(&rproc->dev, PTR_ERR(chan),
> +					    "failed to request mbox chan 0\n");
>  			goto free_clk;
>  		}
>  		ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_RX] = chan;
>  
>  		chan = mbox_request_channel_byname(&ddata->mbox_client_vq0, "vq0_tx");
>  		if (IS_ERR(chan)) {
> -			dev_err(&rproc->dev, "failed to request mbox chan 0\n");
> -			ret = PTR_ERR(chan);
> +			ret = dev_err_probe(&rproc->dev, PTR_ERR(chan),
> +					    "failed to request mbox chan 0\n");
>  			goto free_mbox;
>  		}
>  		ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_TX] = chan;
>  
>  		chan = mbox_request_channel_byname(&ddata->mbox_client_vq1, "vq1_rx");
>  		if (IS_ERR(chan)) {
> -			dev_err(&rproc->dev, "failed to request mbox chan 1\n");
> -			ret = PTR_ERR(chan);
> +			ret = dev_err_probe(&rproc->dev, PTR_ERR(chan),
> +					    "failed to request mbox chan 1\n");
>  			goto free_mbox;
>  		}
>  		ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_RX] = chan;
>  
>  		chan = mbox_request_channel_byname(&ddata->mbox_client_vq1, "vq1_tx");
>  		if (IS_ERR(chan)) {
> -			dev_err(&rproc->dev, "failed to request mbox chan 1\n");
> -			ret = PTR_ERR(chan);
> +			ret = dev_err_probe(&rproc->dev, PTR_ERR(chan),
> +					    "failed to request mbox chan 1\n");
>  			goto free_mbox;
>  		}
>  		ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_TX] = chan;
> 

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice