Re: [PATCH v2 2/6] extcon-gpio: Use gpio driver/chip debounce if supported

[Chanwoo Choi <cw00.choi@samsung.com>]

On 09/11/2013 11:16 AM, Guenter Roeck wrote:
> 
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v2: rephrase patch subject
>     call gpio_set_debounce before registering extcon device,
>     and set debounce_jiffies only if the call was not successful
> 
>  drivers/extcon/extcon-gpio.c |    8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index 77d35a7..e5a4405 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -100,7 +100,13 @@ static int gpio_extcon_probe(struct platform_device *pdev)
>  	extcon_data->state_off = pdata->state_off;
>  	if (pdata->state_on && pdata->state_off)
>  		extcon_data->edev.print_state = extcon_gpio_print_state;
> -	extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
> +	if (pdata->debounce) {
> +		ret = gpio_set_debounce(extcon_data->gpio,
> +					pdata->debounce * 1000);
> +		if (ret < 0)
> +			extcon_data->debounce_jiffies =
> +				msecs_to_jiffies(pdata->debounce);
> +	}
>  
>  	ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
>  	if (ret < 0)
> 

I'd like you to add patch description for patch feature.
So I add a little description about using gpio_set_debounce()

I modify patch name as following to maintain patch naming style of extcon.
Before
	extcon-gpio: Do not unnecessarily initialize variables
	extcon-gpio: Use gpio driver/chip debounce if supported
After
	extcon: gpio: Do not unnecessarily initialize variables
	extcon: gpio: Use gpio driver/chip debounce if supported

Applied it on extcon-linus.
You can check it on extcon-linus branch in a few minutes.

Thanks,
Chanwoo Choi