From: Sagi Grimberg <sagig@dev.mellanox.co.il>
To: "Nicholas A. Bellinger" <nab@daterainc.com>,
target-devel <target-devel@vger.kernel.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Christoph Hellwig <hch@lst.de>, Hannes Reinecke <hare@suse.de>,
Sagi Grimberg <sagig@mellanox.com>,
Or Gerlitz <ogerlitz@mellanox.com>,
Roland Dreier <roland@kernel.org>,
Nicholas Bellinger <nab@linux-iscsi.org>
Subject: Re: [PATCH-v2 11/17] target/iblock: Add blk_integrity + BIP passthrough support
Date: Sun, 19 Jan 2014 14:21:00 +0200 [thread overview]
Message-ID: <52DBC32C.4060505@dev.mellanox.co.il> (raw)
In-Reply-To: <1390099480-29013-12-git-send-email-nab@daterainc.com>
On 1/19/2014 4:44 AM, Nicholas A. Bellinger wrote:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
>
> This patch adds blk_integrity passthrough support for block_device
> backends using IBLOCK.
Nice!
> This includes iblock_alloc_bip() + setup of bio_integrity_payload
> information that attaches to the leading struct bio once bio_list
> is populated during fast-path iblock_execute_rw() I/O dispatch.
>
> It also updates setup in iblock_configure_device() to detect modes
> of protection + se dev->dev_attrib.pi_prot_type accordingly, along
> with creating required bio_set integrity mempools.
>
> Cc: Martin K. Petersen <martin.petersen@oracle.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Hannes Reinecke <hare@suse.de>
> Cc: Sagi Grimberg <sagig@mellanox.com>
> Cc: Or Gerlitz <ogerlitz@mellanox.com>
> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
> ---
> drivers/target/Kconfig | 1 +
> drivers/target/target_core_iblock.c | 91 ++++++++++++++++++++++++++++++++++-
> 2 files changed, 90 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/target/Kconfig b/drivers/target/Kconfig
> index 50aad2e..dc2d84a 100644
> --- a/drivers/target/Kconfig
> +++ b/drivers/target/Kconfig
> @@ -14,6 +14,7 @@ if TARGET_CORE
>
> config TCM_IBLOCK
> tristate "TCM/IBLOCK Subsystem Plugin for Linux/BLOCK"
> + select BLK_DEV_INTEGRITY
> help
> Say Y here to enable the TCM/IBLOCK subsystem plugin for non-buffered
> access to Linux/Block devices using BIO
> diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
> index 15d9121..293d9b0 100644
> --- a/drivers/target/target_core_iblock.c
> +++ b/drivers/target/target_core_iblock.c
> @@ -91,6 +91,7 @@ static int iblock_configure_device(struct se_device *dev)
> struct iblock_dev *ib_dev = IBLOCK_DEV(dev);
> struct request_queue *q;
> struct block_device *bd = NULL;
> + struct blk_integrity *bi;
> fmode_t mode;
> int ret = -ENOMEM;
>
> @@ -155,8 +156,40 @@ static int iblock_configure_device(struct se_device *dev)
> if (blk_queue_nonrot(q))
> dev->dev_attrib.is_nonrot = 1;
>
> + bi = bdev_get_integrity(bd);
> + if (bi) {
> + struct bio_set *bs = ib_dev->ibd_bio_set;
> +
> + if (!strcmp(bi->name, "T10-DIF-TYPE3-IP") ||
> + !strcmp(bi->name, "T10-DIF-TYPE1-IP")) {
> + pr_err("IBLOCK export of blk_integrity: %s not"
> + " supported\n", bi->name);
> + ret = -ENOSYS;
> + goto out_blkdev_put;
> + }
Please remind me why we ignore IP-CSUM guard type again?
MKP, will this be irrelevant for the initiator as well? if so, I don't
see a reason to expose this in RDMA verbs.
> +
> + if (!strcmp(bi->name, "T10-DIF-TYPE3-CRC")) {
> + dev->dev_attrib.pi_prot_type = TARGET_DIF_TYPE3_PROT;
> + } else if (!strcmp(bi->name, "T10-DIF-TYPE1-CRC")) {
> + dev->dev_attrib.pi_prot_type = TARGET_DIF_TYPE1_PROT;
> + }
> +
> + if (dev->dev_attrib.pi_prot_type) {
> + if (bioset_integrity_create(bs, IBLOCK_BIO_POOL_SIZE) < 0) {
> + pr_err("Unable to allocate bioset for PI\n");
> + ret = -ENOMEM;
> + goto out_blkdev_put;
> + }
> + pr_debug("IBLOCK setup BIP bs->bio_integrity_pool: %p\n",
> + bs->bio_integrity_pool);
> + }
> + dev->dev_attrib.hw_pi_prot_type = dev->dev_attrib.pi_prot_type;
> + }
> +
> return 0;
>
> +out_blkdev_put:
> + blkdev_put(ib_dev->ibd_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL);
> out_free_bioset:
> bioset_free(ib_dev->ibd_bio_set);
> ib_dev->ibd_bio_set = NULL;
> @@ -170,8 +203,10 @@ static void iblock_free_device(struct se_device *dev)
>
> if (ib_dev->ibd_bd != NULL)
> blkdev_put(ib_dev->ibd_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL);
> - if (ib_dev->ibd_bio_set != NULL)
> + if (ib_dev->ibd_bio_set != NULL) {
> + bioset_integrity_free(ib_dev->ibd_bio_set);
> bioset_free(ib_dev->ibd_bio_set);
> + }
> kfree(ib_dev);
> }
>
> @@ -586,13 +621,58 @@ static ssize_t iblock_show_configfs_dev_params(struct se_device *dev, char *b)
> return bl;
> }
>
> +static int
> +iblock_alloc_bip(struct se_cmd *cmd, struct bio *bio)
> +{
> + struct se_device *dev = cmd->se_dev;
> + struct blk_integrity *bi;
> + struct bio_integrity_payload *bip;
> + struct iblock_dev *ib_dev = IBLOCK_DEV(dev);
> + struct scatterlist *sg;
> + int i, rc;
> +
> + bi = bdev_get_integrity(ib_dev->ibd_bd);
> + if (!bi) {
> + pr_err("Unable to locate bio_integrity\n");
> + return -ENODEV;
> + }
> +
> + bip = bio_integrity_alloc(bio, GFP_NOIO, cmd->t_prot_nents);
> + if (!bip) {
> + pr_err("Unable to allocate bio_integrity_payload\n");
> + return -ENOMEM;
> + }
> +
> + bip->bip_size = (cmd->data_length / dev->dev_attrib.block_size) *
> + dev->prot_length;
> + bip->bip_sector = bio->bi_sector;
> +
> + pr_debug("IBLOCK BIP Size: %u Sector: %llu\n", bip->bip_size,
> + (unsigned long long)bip->bip_sector);
> +
> + for_each_sg(cmd->t_prot_sg, sg, cmd->t_prot_nents, i) {
> +
> + rc = bio_integrity_add_page(bio, sg_page(sg), sg->length,
> + sg->offset);
> + if (rc != sg->length) {
> + pr_err("bio_integrity_add_page() failed; %d\n", rc);
> + return -ENOMEM;
> + }
> +
> + pr_debug("Added bio integrity page: %p length: %d offset; %d\n",
> + sg_page(sg), sg->length, sg->offset);
> + }
> +
> + return 0;
> +}
> +
> static sense_reason_t
> iblock_execute_rw(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
> enum dma_data_direction data_direction)
> {
> struct se_device *dev = cmd->se_dev;
> struct iblock_req *ibr;
> - struct bio *bio;
> + struct bio *bio, *bio_start;
> struct bio_list list;
> struct scatterlist *sg;
> u32 sg_num = sgl_nents;
> @@ -655,6 +735,7 @@ iblock_execute_rw(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
> if (!bio)
> goto fail_free_ibr;
>
> + bio_start = bio;
> bio_list_init(&list);
> bio_list_add(&list, bio);
>
> @@ -688,6 +769,12 @@ iblock_execute_rw(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
> sg_num--;
> }
>
> + if (cmd->prot_type) {
> + int rc = iblock_alloc_bip(cmd, bio_start);
> + if (rc)
> + goto fail_put_bios;
> + }
> +
> iblock_submit_bios(&list, rw);
> iblock_complete_cmd(cmd);
> return 0;
next prev parent reply other threads:[~2014-01-19 12:21 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-19 2:44 [PATCH-v2 00/17] target: Add support for DIF Type1+Type3 emulation + passthrough Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 01/17] target: Add DIF related base definitions Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 02/17] target: Add DIF CHECK_CONDITION ASC/ASCQ exception cases Nicholas A. Bellinger
2014-01-22 16:44 ` Sagi Grimberg
2014-01-22 22:16 ` Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 03/17] target/sbc: Add DIF setup in sbc_check_prot + sbc_parse_cdb Nicholas A. Bellinger
2014-01-19 11:43 ` Sagi Grimberg
2014-01-21 22:48 ` Nicholas A. Bellinger
2014-01-22 18:00 ` Sagi Grimberg
2014-01-22 22:27 ` Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 04/17] target/sbc: Add DIF TYPE1+TYPE3 read/write verify emulation Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 05/17] target/spc: Add protection bit to standard INQUIRY output Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 06/17] target/spc: Add protection related bits to INQUIRY EVPD=0x86 Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 07/17] target/sbc: Add P_TYPE + PROT_EN bits to READ_CAPACITY_16 Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 08/17] target/spc: Expose ATO bit in control mode page Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 09/17] target/configfs: Expose protection device attributes Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 10/17] target: Add protection SGLs to target_submit_cmd_map_sgls Nicholas A. Bellinger
2014-01-19 12:12 ` Sagi Grimberg
2014-01-21 22:17 ` Nicholas A. Bellinger
2014-01-22 10:07 ` Sagi Grimberg
2014-01-19 2:44 ` [PATCH-v2 11/17] target/iblock: Add blk_integrity + BIP passthrough support Nicholas A. Bellinger
2014-01-19 12:21 ` Sagi Grimberg [this message]
2014-01-21 22:20 ` Nicholas A. Bellinger
2014-01-22 1:54 ` Martin K. Petersen
2014-01-22 1:52 ` Martin K. Petersen
2014-01-22 10:09 ` Sagi Grimberg
2014-01-19 2:44 ` [PATCH-v2 12/17] target/file: Add DIF protection init/format support Nicholas A. Bellinger
2014-01-19 12:31 ` Sagi Grimberg
2014-01-21 22:28 ` Nicholas A. Bellinger
2014-01-22 10:12 ` Sagi Grimberg
2014-01-22 22:13 ` Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 13/17] target/file: Add DIF protection support to fd_execute_rw Nicholas A. Bellinger
2014-01-19 12:37 ` Sagi Grimberg
2014-01-19 2:44 ` [PATCH-v2 14/17] target/rd: Refactor rd_build_device_space + rd_release_device_space Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 15/17] target/rd: Add support for protection SGL setup + release Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 16/17] target/rd: Add DIF protection into rd_execute_rw Nicholas A. Bellinger
2014-01-19 2:44 ` [PATCH-v2 17/17] tcm_loop: Enable DIF/DIX modes in SCSI host LLD Nicholas A. Bellinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52DBC32C.4060505@dev.mellanox.co.il \
--to=sagig@dev.mellanox.co.il \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=nab@daterainc.com \
--cc=nab@linux-iscsi.org \
--cc=ogerlitz@mellanox.com \
--cc=roland@kernel.org \
--cc=sagig@mellanox.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome