[PATCH v5 1/6] dt-bindings: serial: 8250: aspeed: add ast2600 and aspeed,vuart-over-pci

["Grégoire Layet" <gregoire.layet@9elements.com>]

The ASPEED AST2600 has 2 Virtual UARTs accessible over PCI.
The ASPEED AST2600 can be used as a PCI device.
2 Virtual UART can be exposed to the host via this PCI device.
These are 8250-compatible register sets and can be used to have UART
communication between the PCI BMC and the host.

This boolean can be set to specify if a VUART is used over PCI. A VUART
over PCI needs a syscon phandle. The syscon gives a regmap to the SCU,
which is used to set the enable bits of the PCI device.
On the aspeed's chips, the clocks phandle already points at the SCU node.
But deriving the regmap from the clock provider would misuse the clocks
binding. An explicit syscon phandle states the dependency directly.

Signed-off-by: Grégoire Layet <gregoire.layet@9elements.com>
---
 .../devicetree/bindings/serial/8250.yaml      | 42 ++++++++++++++++++-
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index bb7b9c87a807..8dd4b7af0c0d 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -18,12 +18,34 @@ allOf:
             - aspeed,lpc-io-reg
         - required:
             - aspeed,lpc-interrupts
+    then:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - aspeed,ast2500-vuart
+              - aspeed,ast2600-vuart
+  - if:
+      anyOf:
         - required:
             - aspeed,sirq-polarity-sense
     then:
       properties:
         compatible:
           const: aspeed,ast2500-vuart
+  - if:
+      required:
+        - aspeed,vuart-over-pci
+    then:
+      required:
+        - aspeed,scu-syscon
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2600-vuart
+    else:
+      properties:
+        aspeed,scu-syscon: false
   - if:
       properties:
         compatible:
@@ -106,6 +128,9 @@ properties:
       - const: ns16850
       - const: aspeed,ast2400-vuart
       - const: aspeed,ast2500-vuart
+      - items:
+          - const: aspeed,ast2600-vuart
+          - const: aspeed,ast2500-vuart
       - const: intel,xscale-uart
       - const: mrvl,pxa-uart
       - const: nuvoton,wpcm450-uart
@@ -297,7 +322,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     maxItems: 1
     description: |
-      The VUART LPC address.  Only applicable to aspeed,ast2500-vuart.
+      The VUART LPC address.  Only applicable to aspeed,ast2500-vuart and
+      aspeed,ast2600-vuart.
 
   aspeed,lpc-interrupts:
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -306,7 +332,19 @@ properties:
     description: |
       A 2-cell property describing the VUART SIRQ number and SIRQ
       polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH).  Only
-      applicable to aspeed,ast2500-vuart.
+      applicable to aspeed,ast2500-vuart and aspeed,ast2600-vuart.
+
+  aspeed,vuart-over-pci:
+    type: boolean
+    description:
+      Enable the VUART over the BMC PCI device. Only applicable to
+      aspeed,ast2600-vuart.
+
+  aspeed,scu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the SCU syscon, used to enable the VUART over the BMC PCI
+      device. Only applicable to aspeed,ast2600-vuart.
 
 required:
   - reg
-- 
2.54.0