From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
To: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>,
Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
David Long <dave.long@linaro.org>,
Denys Vlasenko <dvlasenk@redhat.com>,
"Frank Ch. Eigler" <fche@redhat.com>,
Jim Keniston <jkenisto@us.ibm.com>,
Jonathan Lebon <jlebon@redhat.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/7] uprobes/x86: move the UPROBE_FIX_{RIP,IP,CALL} code at the end of pre/post hooks
Date: Tue, 01 Apr 2014 12:24:58 +0900 [thread overview]
Message-ID: <533A318A.2080603@hitachi.com> (raw)
In-Reply-To: <20140331194412.GA9304@redhat.com>
(2014/04/01 4:44), Oleg Nesterov wrote:
> No functional changes. Preparation to simplify the review of the next
> change. Just reorder the code in arch_uprobe_pre/post_xol() functions
> so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end.
>
> Also change arch_uprobe_pre_xol() to use utask instead of autask, to
> make the code more symmetrical with arch_uprobe_post_xol().
>
> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Thank you!
> ---
> arch/x86/kernel/uprobes.c | 30 ++++++++++++++----------------
> 1 files changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
> index e8d7b38..7dd65dc 100644
> --- a/arch/x86/kernel/uprobes.c
> +++ b/arch/x86/kernel/uprobes.c
> @@ -472,19 +472,18 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
> */
> int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
> {
> - struct arch_uprobe_task *autask;
> + struct uprobe_task *utask = current->utask;
>
> - autask = ¤t->utask->autask;
> - autask->saved_trap_nr = current->thread.trap_nr;
> + regs->ip = utask->xol_vaddr;
> + utask->autask.saved_trap_nr = current->thread.trap_nr;
> current->thread.trap_nr = UPROBE_TRAP_NR;
> - regs->ip = current->utask->xol_vaddr;
> - pre_xol_rip_insn(auprobe, regs, autask);
>
> - autask->saved_tf = !!(regs->flags & X86_EFLAGS_TF);
> + utask->autask.saved_tf = !!(regs->flags & X86_EFLAGS_TF);
> regs->flags |= X86_EFLAGS_TF;
> if (test_tsk_thread_flag(current, TIF_BLOCKSTEP))
> set_task_blockstep(current, false);
>
> + pre_xol_rip_insn(auprobe, regs, &utask->autask);
> return 0;
> }
>
> @@ -558,22 +557,13 @@ bool arch_uprobe_xol_was_trapped(struct task_struct *t)
> */
> int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
> {
> - struct uprobe_task *utask;
> + struct uprobe_task *utask = current->utask;
> long correction;
> int result = 0;
>
> WARN_ON_ONCE(current->thread.trap_nr != UPROBE_TRAP_NR);
>
> - utask = current->utask;
> current->thread.trap_nr = utask->autask.saved_trap_nr;
> - correction = (long)(utask->vaddr - utask->xol_vaddr);
> - handle_riprel_post_xol(auprobe, regs, &correction);
> - if (auprobe->fixups & UPROBE_FIX_IP)
> - regs->ip += correction;
> -
> - if (auprobe->fixups & UPROBE_FIX_CALL)
> - result = adjust_ret_addr(regs->sp, correction);
> -
> /*
> * arch_uprobe_pre_xol() doesn't save the state of TIF_BLOCKSTEP
> * so we can get an extra SIGTRAP if we do not clear TF. We need
> @@ -584,6 +574,14 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
> else if (!(auprobe->fixups & UPROBE_FIX_SETF))
> regs->flags &= ~X86_EFLAGS_TF;
>
> + correction = (long)(utask->vaddr - utask->xol_vaddr);
> + handle_riprel_post_xol(auprobe, regs, &correction);
> + if (auprobe->fixups & UPROBE_FIX_IP)
> + regs->ip += correction;
> +
> + if (auprobe->fixups & UPROBE_FIX_CALL)
> + result = adjust_ret_addr(regs->sp, correction);
> +
> return result;
> }
>
>
--
Masami HIRAMATSU
IT Management Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: masami.hiramatsu.pt@hitachi.com
next prev parent reply other threads:[~2014-04-01 3:25 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-31 19:43 [PATCH 0/7] uprobes/x86: introduce uprobe_xol_ops and arch_uprobe->ops Oleg Nesterov
2014-03-31 19:43 ` [PATCH 1/7] uprobes: Kill UPROBE_SKIP_SSTEP and can_skip_sstep() Oleg Nesterov
2014-04-01 1:41 ` Masami Hiramatsu
2014-04-01 15:39 ` David Long
2014-04-03 16:32 ` Srikar Dronamraju
2014-03-31 19:43 ` [PATCH 2/7] uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() Oleg Nesterov
2014-04-01 2:00 ` Masami Hiramatsu
2014-04-03 16:33 ` Srikar Dronamraju
2014-03-31 19:44 ` [PATCH 3/7] uprobes/x86: Conditionalize the usage of handle_riprel_insn() Oleg Nesterov
2014-04-01 3:17 ` Masami Hiramatsu
2014-04-01 14:33 ` Oleg Nesterov
2014-04-01 16:39 ` Oleg Nesterov
2014-04-02 17:57 ` Jim Keniston
2014-04-02 19:14 ` Oleg Nesterov
2014-03-31 19:44 ` [PATCH 4/7] uprobes/x86: Kill the "ia32_compat" check in handle_riprel_insn(), remove "mm" arg Oleg Nesterov
2014-04-01 3:10 ` Masami Hiramatsu
2014-04-03 16:33 ` Srikar Dronamraju
2014-03-31 19:44 ` [PATCH 5/7] uprobes/x86: Gather "riprel" functions together Oleg Nesterov
2014-04-01 3:21 ` Masami Hiramatsu
2014-04-02 19:53 ` Jim Keniston
2014-04-03 19:50 ` Oleg Nesterov
2014-03-31 19:44 ` [PATCH 6/7] uprobes/x86: move the UPROBE_FIX_{RIP,IP,CALL} code at the end of pre/post hooks Oleg Nesterov
2014-04-01 3:24 ` Masami Hiramatsu [this message]
2014-04-03 16:34 ` Srikar Dronamraju
2014-03-31 19:44 ` [PATCH 7/7] uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Oleg Nesterov
2014-04-01 6:52 ` Masami Hiramatsu
2014-04-01 14:44 ` Oleg Nesterov
2014-04-01 15:01 ` Oleg Nesterov
2014-04-02 19:46 ` Jim Keniston
2014-04-03 19:49 ` Oleg Nesterov
2014-04-02 19:58 ` [PATCH 0/7] uprobes/x86: introduce " Jim Keniston
2014-04-03 20:00 ` [PATCH 8-9/7] " Oleg Nesterov
2014-04-03 20:00 ` [PATCH 8/7] uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails Oleg Nesterov
2014-04-03 20:01 ` [PATCH 9/7] uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible Oleg Nesterov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533A318A.2080603@hitachi.com \
--to=masami.hiramatsu.pt@hitachi.com \
--cc=ananth@in.ibm.com \
--cc=dave.long@linaro.org \
--cc=dvlasenk@redhat.com \
--cc=fche@redhat.com \
--cc=jkenisto@us.ibm.com \
--cc=jlebon@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=oleg@redhat.com \
--cc=srikar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome