From: Heiko Schocher <hs@denx.de>
To: Guenter Roeck <linux@roeck-us.net>
Cc: lm-sensors@lm-sensors.org, Jean Delvare <khali@linux-fr.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org
Subject: Re: [PATCH v4] hwmon: Driver for TI TMP103 temperature sensor
Date: Tue, 17 Jun 2014 13:01:39 +0200 [thread overview]
Message-ID: <53A02013.1060403@denx.de> (raw)
In-Reply-To: <53A01CE6.4010608@roeck-us.net>
Hello Guenter
Am 17.06.2014 12:48, schrieb Guenter Roeck:
> On 06/17/2014 01:11 AM, Heiko Schocher wrote:
>> Driver for the TI TMP103.
>>
>> The TI TMP103 is similar to the TMP102. It differs from the TMP102
>> by having only 8 bit registers.
>>
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>
> [ ... ]
>> +#define TMP103_CONF_SD (TMP103_CONF_M0 | TMP103_CONF_M1)
>
> Hello Heiko,
>
> I thought this needs to be TMP103_CONF_M1, but from the datasheet it looks
> like it does not matter if M0 is set if M1 is set as well. Did you test it,
> though, to make sure that it works ? I feel slightly uncomfortable with it.
Yes, i tested it on an imx6 based board. I see no issues ... but I can
test it with "#define TMP103_CONF_SD TMP103_CONF_M1" and post a v5 with
this setting if it works ...
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2014-06-17 11:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-17 8:11 Heiko Schocher
2014-06-17 10:48 ` Guenter Roeck
2014-06-17 11:01 ` Heiko Schocher [this message]
2014-06-17 14:22 ` Guenter Roeck
2014-06-17 16:11 ` Mark Rutland
2014-06-17 16:21 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53A02013.1060403@denx.de \
--to=hs@denx.de \
--cc=devicetree@vger.kernel.org \
--cc=khali@linux-fr.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome