Re: [PATCH] Documentation: Fix typo in DocBook files

[Randy Dunlap <rdunlap@infradead.org>]

On 07/03/2014 08:24 PM, Masanari Iida wrote:
> This patch fixed spelling typo in various template files
> within Documentation/Docbook.
> 
> Signed-off-by: Masanari Iida <standby24x7@gmail.com>

Applied, thanks.

> ---
>  Documentation/DocBook/gadget.tmpl                 | 2 +-
>  Documentation/DocBook/genericirq.tmpl             | 4 ++--
>  Documentation/DocBook/kernel-locking.tmpl         | 2 +-
>  Documentation/DocBook/libata.tmpl                 | 6 +++---
>  Documentation/DocBook/media_api.tmpl              | 2 +-
>  Documentation/DocBook/regulator.tmpl              | 2 +-
>  Documentation/DocBook/uio-howto.tmpl              | 4 ++--
>  Documentation/DocBook/usb.tmpl                    | 2 +-
>  Documentation/DocBook/writing-an-alsa-driver.tmpl | 2 +-
>  9 files changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl
> index 4017f14..2c425d7 100644
> --- a/Documentation/DocBook/gadget.tmpl
> +++ b/Documentation/DocBook/gadget.tmpl
> @@ -708,7 +708,7 @@ hardware level details could be very different.
>  
>  <para>Systems need specialized hardware support to implement OTG,
>  notably including a special <emphasis>Mini-AB</emphasis> jack
> -and associated transciever to support <emphasis>Dual-Role</emphasis>
> +and associated transceiver to support <emphasis>Dual-Role</emphasis>
>  operation:
>  they can act either as a host, using the standard
>  Linux-USB host side driver stack,
> diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
> index 46347f6..59fb5c0 100644
> --- a/Documentation/DocBook/genericirq.tmpl
> +++ b/Documentation/DocBook/genericirq.tmpl
> @@ -182,7 +182,7 @@
>  	<para>
>  	Each interrupt is described by an interrupt descriptor structure
>  	irq_desc. The interrupt is referenced by an 'unsigned int' numeric
> -	value which selects the corresponding interrupt decription structure
> +	value which selects the corresponding interrupt description structure
>  	in the descriptor structures array.
>  	The descriptor structure contains status information and pointers
>  	to the interrupt flow method and the interrupt chip structure
> @@ -470,7 +470,7 @@ if (desc->irq_data.chip->irq_eoi)
>       <para>
>         To avoid copies of identical implementations of IRQ chips the
>         core provides a configurable generic interrupt chip
> -       implementation. Developers should check carefuly whether the
> +       implementation. Developers should check carefully whether the
>         generic chip fits their needs before implementing the same
>         functionality slightly differently themselves.
>       </para>
> diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
> index 19f2a5a..e584ee1 100644
> --- a/Documentation/DocBook/kernel-locking.tmpl
> +++ b/Documentation/DocBook/kernel-locking.tmpl
> @@ -1760,7 +1760,7 @@ as it would be on UP.
>  </para>
>  
>  <para>
> -There is a furthur optimization possible here: remember our original
> +There is a further optimization possible here: remember our original
>  cache code, where there were no reference counts and the caller simply
>  held the lock whenever using the object?  This is still possible: if
>  you hold the lock, no one can delete the object, so you don't need to
> diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
> index deb71ba..d7fcdc5 100644
> --- a/Documentation/DocBook/libata.tmpl
> +++ b/Documentation/DocBook/libata.tmpl
> @@ -677,7 +677,7 @@ and other resources, etc.
>  
>  	<listitem>
>  	<para>
> -	ATA_QCFLAG_ACTIVE is clared from qc->flags.
> +	ATA_QCFLAG_ACTIVE is cleared from qc->flags.
>  	</para>
>  	</listitem>
>  
> @@ -708,7 +708,7 @@ and other resources, etc.
>  
>  	   <listitem>
>  	   <para>
> -	   qc->waiting is claread &amp; completed (in that order).
> +	   qc->waiting is cleared &amp; completed (in that order).
>  	   </para>
>  	   </listitem>
>  
> @@ -1163,7 +1163,7 @@ and other resources, etc.
>  
>  	<para>
>  	Once sense data is acquired, this type of errors can be
> -	handled similary to other SCSI errors.  Note that sense data
> +	handled similarly to other SCSI errors.  Note that sense data
>  	may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
>  	&amp;&amp; ASC/ASCQ 47h/00h SCSI PARITY ERROR).  In such
>  	cases, the error should be considered as an ATA bus error and
> diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl
> index 4decb46..03f9a1f 100644
> --- a/Documentation/DocBook/media_api.tmpl
> +++ b/Documentation/DocBook/media_api.tmpl
> @@ -68,7 +68,7 @@
>  		several digital tv standards. While it is called as DVB API,
>  		in fact it covers several different video standards including
>  		DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
> -		to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
> +		to document support also for DVB-S2, ISDB-T and ISDB-S.</para>
>  	<para>The third part covers the Remote Controller API.</para>
>  	<para>The fourth part covers the Media Controller API.</para>
>  	<para>For additional information and for the latest development code,
> diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl
> index 346e552..3b08a08 100644
> --- a/Documentation/DocBook/regulator.tmpl
> +++ b/Documentation/DocBook/regulator.tmpl
> @@ -155,7 +155,7 @@
>         release regulators.  Functions are
>         provided to <link linkend='API-regulator-enable'>enable</link>
>         and <link linkend='API-regulator-disable'>disable</link> the
> -       reguator and to get and set the runtime parameters of the
> +       regulator and to get and set the runtime parameters of the
>         regulator.
>       </para>
>       <para>
> diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
> index 9561815..bbe9c1f 100644
> --- a/Documentation/DocBook/uio-howto.tmpl
> +++ b/Documentation/DocBook/uio-howto.tmpl
> @@ -766,10 +766,10 @@ framework to set up sysfs files for this region. Simply leave it alone.
>  	<para>
>  	The dynamic memory regions will be allocated when the UIO device file,
>  	<varname>/dev/uioX</varname> is opened.
> -	Simiar to static memory resources, the memory region information for
> +	Similar to static memory resources, the memory region information for
>  	dynamic regions is then visible via sysfs at
>  	<varname>/sys/class/uio/uioX/maps/mapY/*</varname>.
> -	The dynmaic memory regions will be freed when the UIO device file is
> +	The dynamic memory regions will be freed when the UIO device file is
>  	closed. When no processes are holding the device file open, the address
>  	returned to userspace is ~0.
>  	</para>
> diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
> index 8d57c18..85fc0e2 100644
> --- a/Documentation/DocBook/usb.tmpl
> +++ b/Documentation/DocBook/usb.tmpl
> @@ -153,7 +153,7 @@
>  
>  	<listitem><para>The Linux USB API supports synchronous calls for
>  	control and bulk messages.
> -	It also supports asynchnous calls for all kinds of data transfer,
> +	It also supports asynchronous calls for all kinds of data transfer,
>  	using request structures called "URBs" (USB Request Blocks).
>  	</para></listitem>
>  
> diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
> index d0056a4..6f639d9 100644
> --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
> +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
> @@ -5696,7 +5696,7 @@ struct _snd_pcm_runtime {
>  	suspending the PCM operations via
>  	<function>snd_pcm_suspend_all()</function> or
>  	<function>snd_pcm_suspend()</function>.  It means that the PCM
> -	streams are already stoppped when the register snapshot is
> +	streams are already stopped when the register snapshot is
>  	taken.  But, remember that you don't have to restart the PCM
>  	stream in the resume callback. It'll be restarted via 
>  	trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>
> 


-- 
~Randy