mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: Christoph Hellwig <hch@lst.de>,
	James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>,
	Bart Van Assche <bvanassche@fusionio.com>,
	Robert Elliott <Elliott@hp.com>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready
Date: Wed, 09 Jul 2014 13:14:35 +0200	[thread overview]
Message-ID: <53BD241B.1040806@suse.de> (raw)
In-Reply-To: <1403715121-1201-6-git-send-email-hch@lst.de>

On 06/25/2014 06:51 PM, Christoph Hellwig wrote:
> Prepare for not taking a host-wide lock in the dispatch path by pushing
> the lock down into the places that actually need it.  Note that this
> patch is just a preparation step, as it will actually increase lock
> roundtrips and thus decrease performance on its own.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>   drivers/scsi/scsi_lib.c |   75 ++++++++++++++++++++++++-----------------------
>   1 file changed, 39 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 6989b6f..18e6449 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -1300,18 +1300,18 @@ static inline int scsi_dev_queue_ready(struct request_queue *q,
>   /*
>    * scsi_target_queue_ready: checks if there we can send commands to target
>    * @sdev: scsi device on starget to check.
> - *
> - * Called with the host lock held.
>    */
>   static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
>   					   struct scsi_device *sdev)
>   {
>   	struct scsi_target *starget = scsi_target(sdev);
> +	int ret = 0;
>
> +	spin_lock_irq(shost->host_lock);
>   	if (starget->single_lun) {
>   		if (starget->starget_sdev_user &&
>   		    starget->starget_sdev_user != sdev)
> -			return 0;
> +			goto out;
>   		starget->starget_sdev_user = sdev;
>   	}
>
> @@ -1319,57 +1319,66 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
>   		/*
>   		 * unblock after target_blocked iterates to zero
>   		 */
> -		if (--starget->target_blocked == 0) {
> -			SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
> -					 "unblocking target at zero depth\n"));
> -		} else
> -			return 0;
> +		if (--starget->target_blocked != 0)
> +			goto out;
> +
> +		SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
> +				 "unblocking target at zero depth\n"));
>   	}
>
>   	if (scsi_target_is_busy(starget)) {
>   		list_move_tail(&sdev->starved_entry, &shost->starved_list);
> -		return 0;
> +		goto out;
>   	}
>
> -	return 1;
> +	scsi_target(sdev)->target_busy++;
> +	ret = 1;
> +out:
> +	spin_unlock_irq(shost->host_lock);
> +	return ret;
>   }
>
>   /*
>    * scsi_host_queue_ready: if we can send requests to shost, return 1 else
>    * return 0. We must end up running the queue again whenever 0 is
>    * returned, else IO can hang.
> - *
> - * Called with host_lock held.
>    */
>   static inline int scsi_host_queue_ready(struct request_queue *q,
>   				   struct Scsi_Host *shost,
>   				   struct scsi_device *sdev)
>   {
> +	int ret = 0;
> +
> +	spin_lock_irq(shost->host_lock);
> +
>   	if (scsi_host_in_recovery(shost))
> -		return 0;
> +		goto out;
>   	if (shost->host_busy == 0 && shost->host_blocked) {
>   		/*
>   		 * unblock after host_blocked iterates to zero
>   		 */
> -		if (--shost->host_blocked == 0) {
> -			SCSI_LOG_MLQUEUE(3,
> -				shost_printk(KERN_INFO, shost,
> -					     "unblocking host at zero depth\n"));
> -		} else {
> -			return 0;
> -		}
> +		if (--shost->host_blocked != 0)
> +			goto out;
> +
> +		SCSI_LOG_MLQUEUE(3,
> +			shost_printk(KERN_INFO, shost,
> +				     "unblocking host at zero depth\n"));
>   	}
>   	if (scsi_host_is_busy(shost)) {
>   		if (list_empty(&sdev->starved_entry))
>   			list_add_tail(&sdev->starved_entry, &shost->starved_list);
> -		return 0;
> +		goto out;
>   	}
>
>   	/* We're OK to process the command, so we can't be starved */
>   	if (!list_empty(&sdev->starved_entry))
>   		list_del_init(&sdev->starved_entry);
>
> -	return 1;
> +	shost->host_busy++;
> +	ret = 1;
> +out:
> +	spin_unlock_irq(shost->host_lock);
> +	return ret;
>   }
>
>   /*
> @@ -1550,7 +1559,7 @@ static void scsi_request_fn(struct request_queue *q)
>   			blk_start_request(req);
>   		sdev->device_busy++;
>
> -		spin_unlock(q->queue_lock);
> +		spin_unlock_irq(q->queue_lock);
>   		cmd = req->special;
>   		if (unlikely(cmd == NULL)) {
>   			printk(KERN_CRIT "impossible request in %s.\n"
> @@ -1560,7 +1569,6 @@ static void scsi_request_fn(struct request_queue *q)
>   			blk_dump_rq_flags(req, "foo");
>   			BUG();
>   		}
> -		spin_lock(shost->host_lock);
>
>   		/*
>   		 * We hit this when the driver is using a host wide
> @@ -1571,9 +1579,11 @@ static void scsi_request_fn(struct request_queue *q)
>   		 * a run when a tag is freed.
>   		 */
>   		if (blk_queue_tagged(q) && !blk_rq_tagged(req)) {
> +			spin_lock_irq(shost->host_lock);
>   			if (list_empty(&sdev->starved_entry))
>   				list_add_tail(&sdev->starved_entry,
>   					      &shost->starved_list);
> +			spin_unlock_irq(shost->host_lock);
>   			goto not_ready;
>   		}
>
> @@ -1581,16 +1591,7 @@ static void scsi_request_fn(struct request_queue *q)
>   			goto not_ready;
>
>   		if (!scsi_host_queue_ready(q, shost, sdev))
> -			goto not_ready;
> -
> -		scsi_target(sdev)->target_busy++;
> -		shost->host_busy++;
> -
> -		/*
> -		 * XXX(hch): This is rather suboptimal, scsi_dispatch_cmd will
> -		 *		take the lock again.
> -		 */
> -		spin_unlock_irq(shost->host_lock);
> +			goto host_not_ready;
>
>   		/*
>   		 * Finally, initialize any error handling parameters, and set up
> @@ -1613,9 +1614,11 @@ static void scsi_request_fn(struct request_queue *q)
>
>   	return;
>
> - not_ready:
> + host_not_ready:
> +	spin_lock_irq(shost->host_lock);
> +	scsi_target(sdev)->target_busy--;
>   	spin_unlock_irq(shost->host_lock);
> -
> + not_ready:
>   	/*
>   	 * lock q, handle tag, requeue req, and decrement device_busy. We
>   	 * must return with queue_lock held.
>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)

  reply	other threads:[~2014-07-09 11:14 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-25 16:51 scsi-mq V2 Christoph Hellwig
2014-06-25 16:51 ` [PATCH 01/14] sd: don't use rq->cmd_len before setting it up Christoph Hellwig
2014-07-09 11:12   ` Hannes Reinecke
2014-07-09 15:03     ` Christoph Hellwig
2014-06-25 16:51 ` [PATCH 02/14] scsi: split __scsi_queue_insert Christoph Hellwig
2014-07-09 11:12   ` Hannes Reinecke
2014-06-25 16:51 ` [PATCH 03/14] scsi: centralize command re-queueing in scsi_dispatch_fn Christoph Hellwig
2014-07-08 20:51   ` Elliott, Robert (Server Storage)
2014-07-09  6:40     ` Christoph Hellwig
2014-07-09 11:13   ` Hannes Reinecke
2014-06-25 16:51 ` [PATCH 04/14] scsi: set ->scsi_done before calling scsi_dispatch_cmd Christoph Hellwig
2014-07-09 11:14   ` Hannes Reinecke
2014-06-25 16:51 ` [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready Christoph Hellwig
2014-07-09 11:14   ` Hannes Reinecke [this message]
2014-06-25 16:51 ` [PATCH 06/14] scsi: convert target_busy to an atomic_t Christoph Hellwig
2014-07-09 11:15   ` Hannes Reinecke
2014-06-25 16:51 ` [PATCH 07/14] scsi: convert host_busy to atomic_t Christoph Hellwig
2014-07-09 11:15   ` Hannes Reinecke
2014-06-25 16:51 ` [PATCH 08/14] scsi: convert device_busy " Christoph Hellwig
2014-07-09 11:16   ` Hannes Reinecke
2014-07-09 16:49   ` James Bottomley
2014-07-10  6:01     ` Christoph Hellwig
2014-06-25 16:51 ` [PATCH 09/14] scsi: fix the {host,target,device}_blocked counter mess Christoph Hellwig
2014-07-09 11:12   ` Hannes Reinecke
2014-07-10  6:06     ` Christoph Hellwig
2014-06-25 16:51 ` [PATCH 10/14] scsi: only maintain target_blocked if the driver has a target queue limit Christoph Hellwig
2014-07-09 11:19   ` Hannes Reinecke
2014-07-09 15:05     ` Christoph Hellwig
2014-06-25 16:51 ` [PATCH 11/14] scsi: unwind blk_end_request_all and blk_end_request_err calls Christoph Hellwig
2014-07-09 11:20   ` Hannes Reinecke
2014-06-25 16:51 ` [PATCH 12/14] scatterlist: allow chaining to preallocated chunks Christoph Hellwig
2014-07-09 11:21   ` Hannes Reinecke
2014-06-25 16:52 ` [PATCH 13/14] scsi: add support for a blk-mq based I/O path Christoph Hellwig
2014-07-09 11:25   ` Hannes Reinecke
2014-07-16 11:13   ` Mike Christie
2014-07-16 11:16     ` Christoph Hellwig
2014-06-25 16:52 ` [PATCH 14/14] fnic: reject device resets without assigned tags for the blk-mq case Christoph Hellwig
2014-07-09 11:27   ` Hannes Reinecke
2014-06-26  4:50 ` scsi-mq V2 Jens Axboe
2014-06-26 22:07   ` Elliott, Robert (Server Storage)
2014-06-27 14:42     ` Bart Van Assche
2014-06-30 15:20   ` Jens Axboe
2014-06-30 15:25     ` Christoph Hellwig
2014-06-30 15:54       ` Martin K. Petersen
2014-07-08 14:48 ` Christoph Hellwig
2014-07-09 16:39   ` Douglas Gilbert
2014-07-09 19:38     ` Jens Axboe
2014-07-10  0:53       ` Elliott, Robert (Server Storage)
2014-07-10  6:20         ` Christoph Hellwig
2014-07-10 13:36           ` Benjamin LaHaise
2014-07-10 13:39             ` Jens Axboe
2014-07-10 13:44               ` Benjamin LaHaise
2014-07-10 13:48                 ` Jens Axboe
2014-07-10 13:50                   ` Benjamin LaHaise
2014-07-10 13:52                     ` Jens Axboe
2014-07-10 13:50             ` Christoph Hellwig
2014-07-10 13:52               ` Jens Axboe
2014-07-10 14:36                 ` Elliott, Robert (Server Storage)
2014-07-10 14:45                   ` Benjamin LaHaise
2014-07-10 15:11                     ` Jeff Moyer
2014-07-10 19:59                       ` Jens Axboe
2014-07-10 20:05                         ` Jeff Moyer
2014-07-10 20:06                           ` Jens Axboe
2014-07-10 15:51           ` Elliott, Robert (Server Storage)
2014-07-10 16:04             ` Christoph Hellwig
2014-07-10 16:14               ` Christoph Hellwig
2014-07-10 18:49                 ` Elliott, Robert (Server Storage)
2014-07-10 19:14                   ` Jeff Moyer
2014-07-10 19:36                     ` Jeff Moyer
2014-07-10 21:10                     ` Elliott, Robert (Server Storage)
2014-07-11  6:02                       ` Elliott, Robert (Server Storage)
2014-07-11  6:14                         ` Christoph Hellwig
2014-07-11 14:33                           ` Elliott, Robert (Server Storage)
2014-07-11 14:55                             ` Benjamin LaHaise
2014-07-12 21:50                               ` Elliott, Robert (Server Storage)
2014-07-12 23:20                                 ` Elliott, Robert (Server Storage)
2014-07-13 17:15                                   ` Elliott, Robert (Server Storage)
2014-07-14 17:15                                     ` Benjamin LaHaise
2014-07-14  9:13   ` Sagi Grimberg
2014-08-21 12:32     ` Performance degradation in IO writes vs. reads (was scsi-mq V2) Sagi Grimberg
2014-08-21 13:03       ` Christoph Hellwig
2014-08-21 14:02         ` Sagi Grimberg
2014-08-24 16:41           ` Sagi Grimberg
  -- strict thread matches above, loose matches on Subject: below --
2014-07-18 10:12 scsi-mq V4 Christoph Hellwig
2014-07-18 10:13 ` [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready Christoph Hellwig
2014-07-22  3:52   ` Martin K. Petersen
2014-06-12 13:48 scsi-mq Christoph Hellwig
2014-06-12 13:48 ` [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53BD241B.1040806@suse.de \
    --to=hare@suse.de \
    --cc=Elliott@hp.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@fusionio.com \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome