mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Oren Twaig <oren@scalemp.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	David Rientjes <rientjes@google.com>,
	Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>,
	Paul Gortmaker <paul.gortmaker@windriver.com>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	Andi Kleen <ak@linux.intel.com>,
	HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>,
	Richard Weinberger <richard@nod.at>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org
Subject: Ping: Re: [PATCH v2] x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
Date: Sun, 13 Jul 2014 09:51:54 +0300	[thread overview]
Message-ID: <53C22C8A.2010406@scalemp.com> (raw)
In-Reply-To: <53B8EDA6.5020704@scalemp.com>

ping
On 07/06/2014 09:33 AM, Oren Twaig wrote:
> Hi,
>
> Quick question: As I'm new at this (submitting patches), what is a reasonable
> time to wait before ping-ing a patch ?
>
> Oren.
>
> On 06/29/2014 01:01 PM, Oren Twaig wrote:
>> When a vSMP Foundation box is detected, the function apic_cluster_num() counts
>> the number of APIC clusters found. If more than one found, a multi board
>> configuration is assumed, and TSC marked as unstable. This behavior is
>> incorrect as vSMP Foundation may use processors from single node only, attached
>> to memory of other nodes - and such node may have more than one APIC cluster
>> (typically any recent intel box has more than single APIC_CLUSTERID(x)).
>>
>> To fix this, we simply remove the code which detects a vSMP Foundation box and
>> affects apic_is_clusted_box() return value. This can be done because later the
>> kernel checks by itself if the TSC is stable using the
>> check_tsc_sync_[source|target]() functions and marks TSC as unstable if needed.
>>
>> Acked-by: Shai Fultheim <shai@scalemp.com>
>> Signed-off-by: Oren Twaig <oren@scalemp.com>
>> ---
>> diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
>> index 19b0eba..c100694 100644
>> --- a/arch/x86/include/asm/apic.h
>> +++ b/arch/x86/include/asm/apic.h
>> @@ -85,14 +85,6 @@ static inline bool apic_from_smp_config(void)
>>  #include <asm/paravirt.h>
>>  #endif
>>
>> -#ifdef CONFIG_X86_64
>> -extern int is_vsmp_box(void);
>> -#else
>> -static inline int is_vsmp_box(void)
>> -{
>> -    return 0;
>> -}
>> -#endif
>>  extern int setup_profiling_timer(unsigned int);
>>
>>  static inline void native_apic_mem_write(u32 reg, u32 v)
>> diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
>> index ad28db7..2b85bb9 100644
>> --- a/arch/x86/kernel/apic/apic.c
>> +++ b/arch/x86/kernel/apic/apic.c
>> @@ -2451,51 +2451,6 @@ static void apic_pm_activate(void) { }
>>
>>  #ifdef CONFIG_X86_64
>>
>> -static int apic_cluster_num(void)
>> -{
>> -    int i, clusters, zeros;
>> -    unsigned id;
>> -    u16 *bios_cpu_apicid;
>> -    DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
>> -
>> -    bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
>> -    bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
>> -
>> -    for (i = 0; i < nr_cpu_ids; i++) {
>> -        /* are we being called early in kernel startup? */
>> -        if (bios_cpu_apicid) {
>> -            id = bios_cpu_apicid[i];
>> -        } else if (i < nr_cpu_ids) {
>> -            if (cpu_present(i))
>> -                id = per_cpu(x86_bios_cpu_apicid, i);
>> -            else
>> -                continue;
>> -        } else
>> -            break;
>> -
>> -        if (id != BAD_APICID)
>> -            __set_bit(APIC_CLUSTERID(id), clustermap);
>> -    }
>> -
>> -    /* Problem:  Partially populated chassis may not have CPUs in some of
>> -     * the APIC clusters they have been allocated.  Only present CPUs have
>> -     * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.
>> -     * Since clusters are allocated sequentially, count zeros only if
>> -     * they are bounded by ones.
>> -     */
>> -    clusters = 0;
>> -    zeros = 0;
>> -    for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
>> -        if (test_bit(i, clustermap)) {
>> -            clusters += 1 + zeros;
>> -            zeros = 0;
>> -        } else
>> -            ++zeros;
>> -    }
>> -
>> -    return clusters;
>> -}
>> -
>>  static int multi_checked;
>>  static int multi;
>>
>> @@ -2540,20 +2495,7 @@ static void dmi_check_multi(void)
>>  int apic_is_clustered_box(void)
>>  {
>>      dmi_check_multi();
>> -    if (multi)
>> -        return 1;
>> -
>> -    if (!is_vsmp_box())
>> -        return 0;
>> -
>> -    /*
>> -     * ScaleMP vSMPowered boxes have one cluster per board and TSCs are
>> -     * not guaranteed to be synced between boards
>> -     */
>> -    if (apic_cluster_num() > 1)
>> -        return 1;
>> -
>> -    return 0;
>> +    return multi;
>>  }
>>  #endif
>>
>>
>
>



  reply	other threads:[~2014-07-13  7:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-29 10:01 Oren Twaig
2014-07-06  6:32 ` Oren Twaig
2014-07-06  6:33 ` Oren Twaig
2014-07-13  6:51   ` Oren Twaig [this message]
2014-07-13  9:10     ` Ping: " Richard Weinberger
2014-07-13  9:27       ` Oren Twaig
2014-07-13 16:40       ` H. Peter Anvin
2014-07-13 18:36         ` Oren Twaig
2014-07-14  1:55 ` [tip:x86/apic] " tip-bot for Oren Twaig
2014-08-01 22:12 ` [tip:x86/apic] x86/apic/vsmp: Make is_vsmp_box() static tip-bot for H. Peter Anvin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53C22C8A.2010406@scalemp.com \
    --to=oren@scalemp.com \
    --cc=ak@linux.intel.com \
    --cc=d.hatayama@jp.fujitsu.com \
    --cc=hpa@zytor.com \
    --cc=jan.kiszka@siemens.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=paul.gortmaker@windriver.com \
    --cc=richard@nod.at \
    --cc=rientjes@google.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --cc=yoshihiro.yunomae.ez@hitachi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome