From: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
To: Taniya Das <taniya.das@oss.qualcomm.com>,
Bjorn Andersson <andersson@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jagadeesh Kona <quic_jkona@quicinc.com>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: Ajit Pandey <ajit.pandey@oss.qualcomm.com>,
Imran Shaik <imran.shaik@oss.qualcomm.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 3/4] clk: qcom: av1ecc-glymur: Add AV1E clock controller driver
Date: Tue, 3 Nov 2026 09:55:00 +0530 [thread overview]
Message-ID: <53aaa9ca-2692-420e-ba01-92276e21530c@oss.qualcomm.com> (raw)
In-Reply-To: <d466c18a-9d33-41d0-8cdb-50af409598b1@oss.qualcomm.com>
On 10/15/2026 7:37 PM, Taniya Das wrote:
>
>
> On 10/15/2026 7:05 PM, Jagadeesh Kona wrote:
>> Add support for the AV1 encoder clock controller (AV1ECC) driver
>> for clients to be able to request for AV1ECC clocks on Qualcomm
>> Glymur platform.
>>
>> Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
>> ---
>> drivers/clk/qcom/Kconfig | 11 ++
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/av1ecc-glymur.c | 393 +++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 405 insertions(+)
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index 27d0ab24d50a4ca5587ed8d6085c4d6fcd57eb8c..94f3445f6bd0ecd297d83b5804ff0e4433d48261 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -69,6 +69,17 @@ config CLK_ELIZA_TCSRCC
>> Support for the TCSR clock controller on Eliza devices.
>> Say Y if you want to use peripheral devices such as USB/PCIe/UFS.
>>
>> +config CLK_GLYMUR_AV1ECC
>> + tristate "Glymur AV1E Clock Controller"
>> + depends on ARM64 || COMPILE_TEST
>> + select CLK_GLYMUR_GCC
>> + default m if ARCH_QCOM
>> + help
>> + Support for the video AV1 encoder clock controller on
>> + Qualcomm Technologies, Inc. Glymur devices.
>> + Say Y if you want to support functionality such as AV1
>> + encoding.
>> +
>> config CLK_GLYMUR_CAMCC
>> tristate "Glymur Camera Clock Controller"
>> depends on ARM64 || COMPILE_TEST
>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
>> index 6affb5073f269d18f1b78d6c7f92e14baeade1e5..61d4efb7547146544902dddf52e4853d073d5467 100644
>> --- a/drivers/clk/qcom/Makefile
>> +++ b/drivers/clk/qcom/Makefile
>> @@ -28,6 +28,7 @@ obj-$(CONFIG_CLK_ELIZA_GPUCC) += gpucc-eliza.o
>> obj-$(CONFIG_CLK_ELIZA_TCSRCC) += tcsrcc-eliza.o
>> obj-$(CONFIG_CLK_ELIZA_VIDEOCC) += videocc-eliza.o
>> obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o
>> +obj-$(CONFIG_CLK_GLYMUR_AV1ECC) += av1ecc-glymur.o
>> obj-$(CONFIG_CLK_GLYMUR_CAMCC) += camcc-glymur.o
>> obj-$(CONFIG_CLK_GLYMUR_DISPCC) += dispcc-glymur.o
>> obj-$(CONFIG_CLK_GLYMUR_EVACC) += evacc-glymur.o
>> diff --git a/drivers/clk/qcom/av1ecc-glymur.c b/drivers/clk/qcom/av1ecc-glymur.c
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..228e73a1a1357dc9ebe508b9fbcec71326388806
>> --- /dev/null
>> +++ b/drivers/clk/qcom/av1ecc-glymur.c
>> @@ -0,0 +1,393 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <dt-bindings/clock/qcom,glymur-av1ecc.h>
>> +
>> +#include "clk-alpha-pll.h"
>> +#include "clk-branch.h"
>> +#include "clk-pll.h"
>> +#include "clk-rcg.h"
>> +#include "clk-regmap.h"
>> +#include "clk-regmap-divider.h"
>> +#include "common.h"
>> +#include "gdsc.h"
>> +#include "reset.h"
>> +
>> +enum {
>> + DT_BI_TCXO,
>> + DT_IFACE,
>> +};
>> +
>> +enum {
>> + P_AV1E_CC_PLL0_OUT_EVEN,
>> + P_AV1E_CC_PLL0_OUT_MAIN,
>> + P_AV1E_CC_PLL0_OUT_ODD,
>> + P_BI_TCXO,
>> +};
>> +
>> +static const struct pll_vco taycan_eko_t_vco[] = {
>> + { 249600000, 2500000000, 0 },
>> +};
>> +
>> +/* 600.0 MHz Configuration */
>> +static const struct alpha_pll_config av1e_cc_pll0_config = {
>> + .l = 0x1f,
>> + .cal_l = 0x48,
>> + .alpha = 0x4000,
>> + .config_ctl_val = 0x25c400e7,
>> + .config_ctl_hi_val = 0x0a8060e0,
>> + .config_ctl_hi1_val = 0xf51dea20,
>> + .user_ctl_val = 0x00000008,
>> + .user_ctl_hi_val = 0x00000002,
>> +};
>> +
>> +static struct clk_alpha_pll av1e_cc_pll0 = {
>> + .offset = 0x0,
>> + .config = &av1e_cc_pll0_config,
>> + .vco_table = taycan_eko_t_vco,
>> + .num_vco = ARRAY_SIZE(taycan_eko_t_vco),
>> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TAYCAN_EKO_T],
>> + .clkr = {
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_pll0",
>> + .parent_data = &(const struct clk_parent_data) {
>> + .index = DT_BI_TCXO,
>> + },
>> + .num_parents = 1,
>> + .ops = &clk_alpha_pll_taycan_eko_t_ops,
>> + },
>> + },
>> +};
>> +
>> +static const struct parent_map av1e_cc_parent_map_0[] = {
>> + { P_BI_TCXO, 0 },
>> + { P_AV1E_CC_PLL0_OUT_MAIN, 1 },
>> + { P_AV1E_CC_PLL0_OUT_ODD, 2 },
>> + { P_AV1E_CC_PLL0_OUT_EVEN, 3 },
>> +};
>> +
>> +static const struct clk_parent_data av1e_cc_parent_data_0[] = {
>> + { .index = DT_BI_TCXO },
>> + { .hw = &av1e_cc_pll0.clkr.hw },
>> + { .hw = &av1e_cc_pll0.clkr.hw },
>> + { .hw = &av1e_cc_pll0.clkr.hw },
>> +};
>> +
>> +static const struct parent_map av1e_cc_parent_map_1[] = {
>> + { P_BI_TCXO, 0 },
>> +};
>> +
>> +static const struct clk_parent_data av1e_cc_parent_data_1[] = {
>> + { .index = DT_BI_TCXO },
>> +};
>> +
>> +static const struct freq_tbl ftbl_av1e_cc_av1e_core_clk_src[] = {
>> + F(300000000, P_AV1E_CC_PLL0_OUT_MAIN, 2, 0, 0),
>> + F(400000000, P_AV1E_CC_PLL0_OUT_MAIN, 2, 0, 0),
>> + F(600000000, P_AV1E_CC_PLL0_OUT_MAIN, 2, 0, 0),
>> + { }
>> +};
>> +
>> +static struct clk_rcg2 av1e_cc_av1e_core_clk_src = {
>> + .cmd_rcgr = 0x4018,
>> + .mnd_width = 0,
>> + .hid_width = 5,
>> + .parent_map = av1e_cc_parent_map_0,
>> + .freq_tbl = ftbl_av1e_cc_av1e_core_clk_src,
>> + .hw_clk_ctrl = true,
>> + .clkr.hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_core_clk_src",
>> + .parent_data = av1e_cc_parent_data_0,
>> + .num_parents = ARRAY_SIZE(av1e_cc_parent_data_0),
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_rcg2_shared_ops,
>> + },
>> +};
>> +
>> +static const struct freq_tbl ftbl_av1e_cc_av1e_xo_clk_src[] = {
>> + F(19200000, P_BI_TCXO, 1, 0, 0),
>> + { }
>> +};
>> +
>> +static struct clk_rcg2 av1e_cc_av1e_xo_clk_src = {
>> + .cmd_rcgr = 0x601c,
>> + .mnd_width = 0,
>> + .hid_width = 5,
>> + .parent_map = av1e_cc_parent_map_1,
>> + .freq_tbl = ftbl_av1e_cc_av1e_xo_clk_src,
>> + .hw_clk_ctrl = true,
>> + .clkr.hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_xo_clk_src",
>> + .parent_data = av1e_cc_parent_data_1,
>> + .num_parents = ARRAY_SIZE(av1e_cc_parent_data_1),
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_rcg2_shared_ops,
>
> Can it be just rcg2_ops?
>
Will update to use rcg2_ops.
>> + },
>> +};
>> +
>> +static struct clk_regmap_div av1e_cc_av1e_noc_ahb_div_clk_src = {
>> + .reg = 0x5020,
>> + .shift = 0,
>> + .width = 4,
>> + .clkr.hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_noc_ahb_div_clk_src",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_core_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_regmap_div_ro_ops,
>> + },
>> +};
>> +
>> +static struct clk_branch av1e_cc_ahb_clk = {
>> + .halt_reg = 0x6000,
>> + .halt_check = BRANCH_HALT_VOTED,
>> + .clkr = {
>> + .enable_reg = 0x6000,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_ahb_clk",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_noc_ahb_div_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_branch av1e_cc_av1e_core_apb_clk = {
>> + .halt_reg = 0x4044,
>> + .halt_check = BRANCH_HALT,
>> + .clkr = {
>> + .enable_reg = 0x4044,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_core_apb_clk",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_core_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_branch av1e_cc_av1e_core_axi_clk = {
>> + .halt_reg = 0x4040,
>> + .halt_check = BRANCH_HALT,
>> + .clkr = {
>> + .enable_reg = 0x4040,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_core_axi_clk",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_core_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_branch av1e_cc_av1e_core_clk = {
>> + .halt_reg = 0x4030,
>> + .halt_check = BRANCH_HALT,
>> + .clkr = {
>> + .enable_reg = 0x4030,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_core_clk",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_core_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_branch av1e_cc_av1e_gdsc_noc_ahb_clk = {
>> + .halt_reg = 0x5024,
>> + .halt_check = BRANCH_HALT,
>> + .clkr = {
>> + .enable_reg = 0x5024,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_gdsc_noc_ahb_clk",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_noc_ahb_div_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_branch av1e_cc_av1e_noc_ahb_clk = {
>> + .halt_reg = 0x5028,
>> + .halt_check = BRANCH_HALT_VOTED,
>> + .clkr = {
>> + .enable_reg = 0x5028,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_noc_ahb_clk",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_noc_ahb_div_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_branch av1e_cc_av1e_noc_core_axi_clk = {
>> + .halt_reg = 0x5004,
>> + .halt_check = BRANCH_HALT,
>> + .clkr = {
>> + .enable_reg = 0x5004,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_noc_core_axi_clk",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_core_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_branch av1e_cc_av1e_noc_xo_clk = {
>> + .halt_reg = 0x6038,
>> + .halt_check = BRANCH_HALT,
>> + .clkr = {
>> + .enable_reg = 0x6038,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(const struct clk_init_data) {
>> + .name = "av1e_cc_av1e_noc_xo_clk",
>> + .parent_hws = (const struct clk_hw*[]) {
>> + &av1e_cc_av1e_xo_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct gdsc av1e_cc_core_gdsc = {
>> + .gdscr = 0x4004,
>> + .en_rest_wait_val = 0x2,
>> + .en_few_wait_val = 0x2,
>> + .clk_dis_wait_val = 0xf,
>> + .pd = {
>> + .name = "av1e_cc_core_gdsc",
>> + },
>> + .pwrsts = PWRSTS_OFF_ON,
>> + .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
>
> Will AV1 consumer have any HW_CTRL requirement?
>
No, there is not HW_CTRL requirement for this GDSC.
Thanks,
Jagadeesh
>> +};
>> +
>> +static struct clk_regmap *av1e_cc_glymur_clocks[] = {
>> + [AV1E_CC_AHB_CLK] = &av1e_cc_ahb_clk.clkr,
>> + [AV1E_CC_AV1E_CORE_APB_CLK] = &av1e_cc_av1e_core_apb_clk.clkr,
>> + [AV1E_CC_AV1E_CORE_AXI_CLK] = &av1e_cc_av1e_core_axi_clk.clkr,
>> + [AV1E_CC_AV1E_CORE_CLK] = &av1e_cc_av1e_core_clk.clkr,
>> + [AV1E_CC_AV1E_CORE_CLK_SRC] = &av1e_cc_av1e_core_clk_src.clkr,
>> + [AV1E_CC_AV1E_GDSC_NOC_AHB_CLK] = &av1e_cc_av1e_gdsc_noc_ahb_clk.clkr,
>> + [AV1E_CC_AV1E_NOC_AHB_CLK] = &av1e_cc_av1e_noc_ahb_clk.clkr,
>> + [AV1E_CC_AV1E_NOC_AHB_DIV_CLK_SRC] = &av1e_cc_av1e_noc_ahb_div_clk_src.clkr,
>> + [AV1E_CC_AV1E_NOC_CORE_AXI_CLK] = &av1e_cc_av1e_noc_core_axi_clk.clkr,
>> + [AV1E_CC_AV1E_NOC_XO_CLK] = &av1e_cc_av1e_noc_xo_clk.clkr,
>> + [AV1E_CC_AV1E_XO_CLK_SRC] = &av1e_cc_av1e_xo_clk_src.clkr,
>> + [AV1E_CC_PLL0] = &av1e_cc_pll0.clkr,
>> +};
>> +
>> +static struct gdsc *av1e_cc_glymur_gdscs[] = {
>> + [AV1E_CC_CORE_GDSC] = &av1e_cc_core_gdsc,
>> +};
>> +
>> +static const struct qcom_reset_map av1e_cc_glymur_resets[] = {
>> + [AV1E_CC_AV1E_CORE_AXI_CLK_ARES] = { 0x4040, 2 },
>> + [AV1E_CC_AV1E_CORE_CLK_ARES] = { 0x4030, 2 },
>> + [AV1E_CC_AV1E_GDSC_NOC_AHB_CLK_ARES] = { 0x5024, 2 },
>> + [AV1E_CC_AV1E_NOC_CORE_AXI_CLK_ARES] = { 0x5004, 2 },
>> + [AV1E_CC_AV1E_NOC_XO_CLK_ARES] = { 0x6038, 2 },
>> + [AV1E_CC_CORE_BCR] = { 0x4000 },
>> + [AV1E_CC_NOC_BCR] = { 0x5000 },
>> +};
>> +
>> +static struct clk_alpha_pll *av1e_cc_glymur_plls[] = {
>> + &av1e_cc_pll0,
>> +};
>> +
>> +static const u32 av1e_cc_glymur_critical_cbcrs[] = {
>> + 0x6034, /* AV1E_CC_AV1E_CC_XO_CLK */
>> + 0x6054, /* AV1E_CC_SLEEP_CLK */
>> +};
>> +
>> +static const struct regmap_config av1e_cc_glymur_regmap_config = {
>> + .reg_bits = 32,
>> + .reg_stride = 4,
>> + .val_bits = 32,
>> + .max_register = 0xa01c,
>> + .fast_io = true,
>> +};
>> +
>> +static const struct qcom_cc_driver_data av1e_cc_glymur_driver_data = {
>> + .alpha_plls = av1e_cc_glymur_plls,
>> + .num_alpha_plls = ARRAY_SIZE(av1e_cc_glymur_plls),
>> + .clk_cbcrs = av1e_cc_glymur_critical_cbcrs,
>> + .num_clk_cbcrs = ARRAY_SIZE(av1e_cc_glymur_critical_cbcrs),
>> +};
>> +
>> +static const struct qcom_cc_desc av1e_cc_glymur_desc = {
>> + .config = &av1e_cc_glymur_regmap_config,
>> + .clks = av1e_cc_glymur_clocks,
>> + .num_clks = ARRAY_SIZE(av1e_cc_glymur_clocks),
>> + .resets = av1e_cc_glymur_resets,
>> + .num_resets = ARRAY_SIZE(av1e_cc_glymur_resets),
>> + .gdscs = av1e_cc_glymur_gdscs,
>> + .num_gdscs = ARRAY_SIZE(av1e_cc_glymur_gdscs),
>> + .use_rpm = true,
>> + .driver_data = &av1e_cc_glymur_driver_data,
>> +};
>> +
>> +static const struct of_device_id av1e_cc_glymur_match_table[] = {
>> + { .compatible = "qcom,glymur-av1ecc" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, av1e_cc_glymur_match_table);
>> +
>> +static int av1e_cc_glymur_probe(struct platform_device *pdev)
>> +{
>> + return qcom_cc_probe(pdev, &av1e_cc_glymur_desc);
>> +}
>> +
>> +static struct platform_driver av1e_cc_glymur_driver = {
>> + .probe = av1e_cc_glymur_probe,
>> + .driver = {
>> + .name = "av1ecc-glymur",
>> + .of_match_table = av1e_cc_glymur_match_table,
>> + },
>> +};
>> +
>> +module_platform_driver(av1e_cc_glymur_driver);
>> +
>> +MODULE_DESCRIPTION("QTI AV1ECC Glymur Driver");
>> +MODULE_LICENSE("GPL");
>>
>
next prev parent reply other threads:[~2026-11-03 4:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 13:35 [PATCH 0/4] clk: qcom: Add support for Glymur AV1E clock controller Jagadeesh Kona
2026-10-15 13:35 ` [PATCH 1/4] clk: qcom: gcc-glymur: Mark GCC AV1E AHB and XO clocks as critical Jagadeesh Kona
2026-10-15 14:00 ` Taniya Das
2026-10-16 13:37 ` Konrad Dybcio
2026-10-19 11:39 ` Abel Vesa
2026-10-15 13:35 ` [PATCH 2/4] dt-bindings: clock: qcom: Add AV1E clock controller on Glymur SoC Jagadeesh Kona
2026-10-17 16:49 ` Krzysztof Kozlowski
2026-10-15 13:35 ` [PATCH 3/4] clk: qcom: av1ecc-glymur: Add AV1E clock controller driver Jagadeesh Kona
2026-10-15 14:07 ` Taniya Das
2026-11-03 4:25 ` Jagadeesh Kona [this message]
2026-10-15 13:35 ` [PATCH 4/4] arm64: dts: qcom: glymur: Add support for AV1E clock controller Jagadeesh Kona
2026-10-16 13:37 ` Konrad Dybcio
2026-10-19 11:38 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53aaa9ca-2692-420e-ba01-92276e21530c@oss.qualcomm.com \
--to=jagadeesh.kona@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=ajit.pandey@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=imran.shaik@oss.qualcomm.com \
--cc=jbrunet+clk@baylibre.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_jkona@quicinc.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=taniya.das@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®