From: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>
To: "jic23@kernel.org" <jic23@kernel.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Subject: Re: [PATCH] iio: imu: adis: use new `delay` structure for SPI transfer delays
Date: Tue, 10 Dec 2019 14:07:02 +0000 [thread overview]
Message-ID: <5401e982a04d32ac17465fa20b34de40dd9bb622.camel@analog.com> (raw)
In-Reply-To: <20191207110504.6db10b0a@archlinux>
On Sat, 2019-12-07 at 11:05 +0000, Jonathan Cameron wrote:
> On Wed, 4 Dec 2019 10:09:04 +0200
> Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
>
> > In a recent change to the SPI subsystem [1], a new `delay` struct was
> > added
> > to replace the `delay_usecs`. This change replaces the current
> > `delay_secs`
> > with `delay` for this driver.
> >
> > The `spi_transfer_delay_exec()` function [in the SPI framework] makes
> > sure
> > that both `delay_usecs` & `delay` are used (in this order to preserve
> > backwards compatibility).
> >
> > [1] commit bebcfd272df6485 ("spi: introduce `delay` field for
> > `spi_transfer` + spi_transfer_delay_exec()")
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> I don't yet have that patch in my upstream so this will have to wait
> until
> it gets there. Give me a poke if I seem to have forgotten about it.
Ack.
Will send a V2 with a typo fix in the commit-desc in the meantime.
>
> Thanks,
>
> Jonathan
>
>
> > ---
> > drivers/iio/imu/adis.c | 27 ++++++++++++++++++---------
> > 1 file changed, 18 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
> > index 2cd2cc2316c6..95af67470668 100644
> > --- a/drivers/iio/imu/adis.c
> > +++ b/drivers/iio/imu/adis.c
> > @@ -38,7 +38,8 @@ int adis_write_reg(struct adis *adis, unsigned int
> > reg,
> > .bits_per_word = 8,
> > .len = 2,
> > .cs_change = 1,
> > - .delay_usecs = adis->data->write_delay,
> > + .delay.value = adis->data->write_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > .cs_change_delay.value = adis->data-
> > >cs_change_delay,
> > .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
> > }, {
> > @@ -46,7 +47,8 @@ int adis_write_reg(struct adis *adis, unsigned int
> > reg,
> > .bits_per_word = 8,
> > .len = 2,
> > .cs_change = 1,
> > - .delay_usecs = adis->data->write_delay,
> > + .delay.value = adis->data->write_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > .cs_change_delay.value = adis->data-
> > >cs_change_delay,
> > .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
> > }, {
> > @@ -54,19 +56,22 @@ int adis_write_reg(struct adis *adis, unsigned int
> > reg,
> > .bits_per_word = 8,
> > .len = 2,
> > .cs_change = 1,
> > - .delay_usecs = adis->data->write_delay,
> > + .delay.value = adis->data->write_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > .cs_change_delay.value = adis->data-
> > >cs_change_delay,
> > .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
> > }, {
> > .tx_buf = adis->tx + 6,
> > .bits_per_word = 8,
> > .len = 2,
> > - .delay_usecs = adis->data->write_delay,
> > + .delay.value = adis->data->write_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > }, {
> > .tx_buf = adis->tx + 8,
> > .bits_per_word = 8,
> > .len = 2,
> > - .delay_usecs = adis->data->write_delay,
> > + .delay.value = adis->data->write_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > },
> > };
> >
> > @@ -138,7 +143,8 @@ int adis_read_reg(struct adis *adis, unsigned int
> > reg,
> > .bits_per_word = 8,
> > .len = 2,
> > .cs_change = 1,
> > - .delay_usecs = adis->data->write_delay,
> > + .delay.value = adis->data->write_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > .cs_change_delay.value = adis->data-
> > >cs_change_delay,
> > .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
> > }, {
> > @@ -146,7 +152,8 @@ int adis_read_reg(struct adis *adis, unsigned int
> > reg,
> > .bits_per_word = 8,
> > .len = 2,
> > .cs_change = 1,
> > - .delay_usecs = adis->data->read_delay,
> > + .delay.value = adis->data->read_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > .cs_change_delay.value = adis->data-
> > >cs_change_delay,
> > .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
> > }, {
> > @@ -155,14 +162,16 @@ int adis_read_reg(struct adis *adis, unsigned int
> > reg,
> > .bits_per_word = 8,
> > .len = 2,
> > .cs_change = 1,
> > - .delay_usecs = adis->data->read_delay,
> > + .delay.value = adis->data->read_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > .cs_change_delay.value = adis->data-
> > >cs_change_delay,
> > .cs_change_delay.unit = SPI_DELAY_UNIT_USECS,
> > }, {
> > .rx_buf = adis->rx + 2,
> > .bits_per_word = 8,
> > .len = 2,
> > - .delay_usecs = adis->data->read_delay,
> > + .delay.value = adis->data->read_delay,
> > + .delay.unit = SPI_DELAY_UNIT_USECS,
> > },
> > };
> >
next prev parent reply other threads:[~2019-12-10 14:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-04 8:09 Alexandru Ardelean
2019-12-07 11:05 ` Jonathan Cameron
2019-12-10 14:07 ` Ardelean, Alexandru [this message]
2019-12-10 14:07 ` [PATCH v2] " Alexandru Ardelean
2020-01-13 22:04 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5401e982a04d32ac17465fa20b34de40dd9bb622.camel@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®