From: Udo van den Heuvel <udovdh@xs4all.nl>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: CRASH during boot 3.16.3+
Date: Sun, 12 Oct 2014 15:57:56 +0200 [thread overview]
Message-ID: <543A88E4.4060707@xs4all.nl> (raw)
Hello,
3.16.2 boots and works fine.
Kernels 3.16.3 and newer crash very early during boot. (did not yet try
3.17)
The problem:
During the first few seconds of bootup the kernel gets into some sort of
loop and rapidly prints loads of register-like things and then a load of
rubbish.
I did `make clean` and then a rebuild etc but this did not help.
How can I capture the logging to find the point where things go wrong?
How can I find out what is wrong?
How can this problem be fixed?
Please post your insights.
Kind regards,
Udo
Base Board Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: F2A85X-UP4
# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models
10h-1fh) I/O Memory Management Unit
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Trinity [Radeon HD 7660D]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity
HDMI Audio Controller
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Root Port
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
Controller (rev 03)
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA
Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI
Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI
Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller
(rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia
Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge
(rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge
(rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 5
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host
Controller (rev 01)
03:06.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI
9835 Multi-I/O Controller (rev 01)
next reply other threads:[~2014-10-12 14:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-12 13:57 Udo van den Heuvel [this message]
2014-10-12 17:42 ` Peter Hurley
2014-10-13 10:14 ` Udo van den Heuvel
2014-10-13 12:14 ` Peter Hurley
2014-10-13 12:22 ` Udo van den Heuvel
2014-10-13 14:01 ` Peter Hurley
2014-10-13 13:46 ` Udo van den Heuvel
2014-10-25 15:18 ` Udo van den Heuvel
2014-10-28 20:32 ` Peter Hurley
2014-10-13 12:26 ` Chuck Ebbert
2014-10-18 10:56 ` Udo van den Heuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=543A88E4.4060707@xs4all.nl \
--to=udovdh@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome