From: Dinh Nguyen <dinguyen@opensource.altera.com>
To: <balbi@ti.com>
Cc: <paulz@synopsys.com>, <dinh.linux@gmail.com>,
<swarren@wwwdotorg.org>, <b.zolnierkie@samsung.com>,
<matthijs@stdin.nl>, <r.baldyga@samsung.com>,
<jg1.han@samsung.com>, <sachin.kamat@linaro.org>,
<ben-linux@fluff.org>, <dianders@chromium.org>,
<kever.yang@rock-chips.com>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv6 4/8] usb: dwc2: Update common interrupt handler to call gadget interrupt handler
Date: Fri, 31 Oct 2014 10:00:09 -0500 [thread overview]
Message-ID: <5453A3F9.2060606@opensource.altera.com> (raw)
In-Reply-To: <20141030140043.GD6482@saruman>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 10/30/2014 09:00 AM, Felipe Balbi wrote:
> Hi,
>
> On Tue, Oct 28, 2014 at 06:25:45PM -0500,
> dinguyen@opensource.altera.com wrote:
>> From: Dinh Nguyen <dinguyen@opensource.altera.com>
>>
>> Make dwc2_handle_common_intr call the gadget interrupt function
>> when operating in peripheral mode. Remove the spinlock functions
>> in s3c_hsotg_irq as dwc2_handle_common_intr() already has the
>> spinlocks.
>>
>> Move the registeration of the IRQ to common code for platform and
>> PCI.
>>
>> Remove duplicate interrupt conditions that was in gadget, as
>> those are handled by dwc2 common interrupt handler.
>>
>> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
>> Acked-by: Paul Zimmerman <paulz@synopsys.com> --- v5: remove
>> individual devm_request_irq from gadget and hcd, and place a
>> single devm_request_irq in platform and pci. v2: Keep interrupt
>> handler for host and peripheral modes separate ---
>> drivers/usb/dwc2/core.c | 10 --------
>> drivers/usb/dwc2/core.h | 3 +++
>> drivers/usb/dwc2/core_intr.c | 3 +++ drivers/usb/dwc2/gadget.c
>> | 57 ++------------------------------------------
>> drivers/usb/dwc2/pci.c | 6 +++++
>> drivers/usb/dwc2/platform.c | 9 +++++++ 6 files changed, 23
>> insertions(+), 65 deletions(-)
>>
>> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
>> index d926945..7605850b 100644 --- a/drivers/usb/dwc2/core.c +++
>> b/drivers/usb/dwc2/core.c @@ -458,16 +458,6 @@ int
>> dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int
>> irq) /* Clear the SRP success bit for FS-I2c */
>> hsotg->srp_success = 0;
>>
>> - if (irq >= 0) { - dev_dbg(hsotg->dev, "registering common
>> handler for irq%d\n", - irq); - retval =
>> devm_request_irq(hsotg->dev, irq, -
>> dwc2_handle_common_intr, IRQF_SHARED, -
>> dev_name(hsotg->dev), hsotg); - if (retval) - return retval; -
>> } - /* Enable common interrupts */
>> dwc2_enable_common_interrupts(hsotg);
>>
>> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
>> index 80d29c7..ec70862 100644 --- a/drivers/usb/dwc2/core.h +++
>> b/drivers/usb/dwc2/core.h @@ -967,6 +967,7 @@ extern int
>> s3c_hsotg_suspend(struct dwc2_hsotg *dwc2); extern int
>> s3c_hsotg_resume(struct dwc2_hsotg *dwc2); extern int
>> dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq); extern void
>> s3c_hsotg_core_init(struct dwc2_hsotg *dwc2); +irqreturn_t
>> s3c_hsotg_irq(int irq, void *pw); #else static inline int
>> s3c_hsotg_remove(struct dwc2_hsotg *dwc2) { return 0; } @@ -977,6
>> +978,8 @@ static inline int s3c_hsotg_resume(struct dwc2_hsotg
>> *dwc2) static inline int dwc2_gadget_init(struct dwc2_hsotg
>> *hsotg, int irq) { return 0; } static inline void
>> s3c_hsotg_core_init(struct dwc2_hsotg *dwc2) {} +static inline
>> irqreturn_t s3c_hsotg_irq(int irq, void *pw) +{ return
>> IRQ_HANDLED; } #endif
>>
>> #if IS_ENABLED(CONFIG_USB_DWC2_HOST) ||
>> IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) diff --git
>> a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
>> index b176c2f..b0c14e0 100644 --- a/drivers/usb/dwc2/core_intr.c
>> +++ b/drivers/usb/dwc2/core_intr.c @@ -474,6 +474,9 @@
>> irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
>>
>> spin_lock(&hsotg->lock);
>>
>> + if (dwc2_is_device_mode(hsotg)) + retval = s3c_hsotg_irq(irq,
>> dev); + gintsts = dwc2_read_common_intr(hsotg); if (gintsts &
>> ~GINTSTS_PRTINT) retval = IRQ_HANDLED; diff --git
>> a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index
>> 19d1b03..202f8cc 100644 --- a/drivers/usb/dwc2/gadget.c +++
>> b/drivers/usb/dwc2/gadget.c @@ -2257,14 +2257,13 @@ void
>> s3c_hsotg_core_init(struct dwc2_hsotg *hsotg) * @irq: The IRQ
>> number triggered * @pw: The pw value when registered the
>> handler. */ -static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
>> +irqreturn_t s3c_hsotg_irq(int irq, void *pw)
>
> why ? It would've been a lot easier to just make the IRQ line
> shared.
>
Reworked to use IRQF_SHARED...
Thanks,
Dinh
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=5+gL
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2014-10-31 15:04 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-28 23:25 [PATCHv6 0/8] usb: dwc2: Add support for dual-role dinguyen
2014-10-28 23:25 ` [PATCHv6 1/8] usb: dwc2: Update the gadget driver to use common dwc2_hsotg structure dinguyen
2014-10-30 13:54 ` Felipe Balbi
2014-10-31 14:55 ` Dinh Nguyen
2014-10-31 2:47 ` Kever Yang
2014-10-31 13:48 ` Felipe Balbi
2014-10-28 23:25 ` [PATCHv6 2/8] usb: dwc2: Move gadget probe function into platform code dinguyen
2014-10-30 13:57 ` Felipe Balbi
2014-10-31 14:59 ` Dinh Nguyen
2014-10-28 23:25 ` [PATCHv6 3/8] usb: dwc2: Initialize the USB core for peripheral mode dinguyen
2014-10-28 23:25 ` [PATCHv6 4/8] usb: dwc2: Update common interrupt handler to call gadget interrupt handler dinguyen
2014-10-30 14:00 ` Felipe Balbi
2014-10-31 15:00 ` Dinh Nguyen [this message]
2014-10-31 20:12 ` Paul Zimmerman
2014-10-28 23:25 ` [PATCHv6 5/8] usb: dwc2: Add call_gadget functions for perpheral mode interrupts dinguyen
2014-10-30 14:01 ` Felipe Balbi
2014-10-31 15:01 ` Dinh Nguyen
2014-10-28 23:25 ` [PATCHv6 6/8] usb: dwc2: gadget: Do not fail probe if there isn't a clock node dinguyen
2014-10-29 1:30 ` Paul Zimmerman
2014-10-30 14:04 ` Felipe Balbi
2014-10-31 15:20 ` Dinh Nguyen
2014-10-31 17:42 ` Felipe Balbi
2014-10-31 19:31 ` Dinh Nguyen
2014-10-31 19:56 ` Dinh Nguyen
2014-11-03 15:25 ` Felipe Balbi
2014-10-31 2:38 ` Kever Yang
2014-10-31 13:49 ` Felipe Balbi
2014-10-28 23:25 ` [PATCHv6 7/8] usb: dwc2: Update Kconfig to support dual-role dinguyen
2014-10-28 23:25 ` [PATCHv6 8/8] usb: dwc2: move usb_disabled() call to host driver only dinguyen
2014-10-29 1:26 ` Paul Zimmerman
2014-10-29 13:35 ` Dinh Nguyen
2014-10-30 14:07 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5453A3F9.2060606@opensource.altera.com \
--to=dinguyen@opensource.altera.com \
--cc=b.zolnierkie@samsung.com \
--cc=balbi@ti.com \
--cc=ben-linux@fluff.org \
--cc=dianders@chromium.org \
--cc=dinh.linux@gmail.com \
--cc=jg1.han@samsung.com \
--cc=kever.yang@rock-chips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=matthijs@stdin.nl \
--cc=paulz@synopsys.com \
--cc=r.baldyga@samsung.com \
--cc=sachin.kamat@linaro.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome