----- Original Message ---- > From: Thomas Gleixner > To: Martin Knoblauch > Cc: Gabriel C ; Bart Van Assche ; linux-kernel@vger.kernel.org; hmh@hmh.eng.br > Sent: Thursday, May 8, 2008 4:13:55 PM > Subject: Re: 2.6.25.2 - Jiffies/Time jumping back and forth (Regereesion from 2.6.24) > > On Thu, 8 May 2008, Martin Knoblauch wrote: > > on two different systems running 2.6.25.2: > > > > ibm x3650(2xDualCore) > > ------------------------------------- > > [root@lpsdm60 ~]# cat > /sys/devices/system/clocksource/clocksource0/available_clocksource > > tsc hpet acpi_pm jiffies > > [root@lpsdm60 ~]# cat > /sys/devices/system/clocksource/clocksource0/current_clocksource > > tsc > > > > HP Proliant DL-380G4 (2xSingleCore) > > ------------------------------------------------------------ > > [root@lpsdm52 ~]# cat > /sys/devices/system/clocksource/clocksource0/available_clocksource > > tsc hpet acpi_pm jiffies > > [root@lpsdm52 ~]# cat > /sys/devices/system/clocksource/clocksource0/current_clocksource > > tsc > > > > and on the DL380G4 running 2.6.24: > > --------------------------------------------------------- > > [root@lpsdm52 ~]# cat > /sys/devices/system/clocksource/clocksource0/available_clocksource > > hpet acpi_pm jiffies tsc > > [root@lpsdm52 ~]# cat > /sys/devices/system/clocksource/clocksource0/current_clocksource > > hpet > > So on 2.6.24 the TSC is declared unstable at some point and 2.6.25 > thinks it works fine. Is this the same kernel config (aside of the 24/25 fuzz) ? > yup. 25 config is derived from 24. Config and demsg for 25 are here: http://www.ussg.iu.edu/hypermail/linux/kernel/0804.2/1144.html Config/dmesg for 24 are attached. Cheers Martin