From: Alexander Gordeev <agordeev@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Alexander Gordeev <agordeev@redhat.com>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
Steven Rostedt <rostedt@goodmis.org>
Subject: [PATCH v3 8/9] rcu: Limit count of static data to the number of RCU levels
Date: Wed, 3 Jun 2015 08:18:30 +0200 [thread overview]
Message-ID: <5477cdbe107e04e7db4c7dbc0a22126caf167e5f.1433311943.git.agordeev@redhat.com> (raw)
In-Reply-To: <cover.1433311943.git.agordeev@redhat.com>
Although a number of RCU levels may be less than the current
maximum of four, some static data associated with each level
are allocated for all four levels. As result, the extra data
never get accessed and just wast memory. This update limits
count of allocated items to the number of used RCU levels.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
---
kernel/rcu/tree.c | 21 ++++-----------------
kernel/rcu/tree.h | 12 ++++++++++++
2 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 2728293..9b7d68d 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -124,13 +124,8 @@ module_param(rcu_fanout_exact, bool, 0444);
static int rcu_fanout_leaf = RCU_FANOUT_LEAF;
module_param(rcu_fanout_leaf, int, 0444);
int rcu_num_lvls __read_mostly = RCU_NUM_LVLS;
-static int num_rcu_lvl[] = { /* Number of rcu_nodes at specified level. */
- NUM_RCU_LVL_0,
- NUM_RCU_LVL_1,
- NUM_RCU_LVL_2,
- NUM_RCU_LVL_3,
- NUM_RCU_LVL_4,
-};
+/* Number of rcu_nodes at specified level. */
+static int num_rcu_lvl[] = NUM_RCU_LVL_INIT;
int rcu_num_nodes __read_mostly = NUM_RCU_NODES; /* Total # rcu_nodes in use. */
/*
@@ -3994,16 +3989,8 @@ static void __init rcu_init_levelspread(int *levelspread, const int *levelcnt)
static void __init rcu_init_one(struct rcu_state *rsp,
struct rcu_data __percpu *rda)
{
- static const char * const buf[] = {
- "rcu_node_0",
- "rcu_node_1",
- "rcu_node_2",
- "rcu_node_3" };
- static const char * const fqs[] = {
- "rcu_node_fqs_0",
- "rcu_node_fqs_1",
- "rcu_node_fqs_2",
- "rcu_node_fqs_3" };
+ static const char * const buf[] = RCU_NODE_NAME_INIT;
+ static const char * const fqs[] = RCU_FQS_NAME_INIT;
static u8 fl_mask = 0x1;
int levelcnt[RCU_NUM_LVLS]; /* # nodes in each level. */
diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h
index 3413f3c..d44856b 100644
--- a/kernel/rcu/tree.h
+++ b/kernel/rcu/tree.h
@@ -68,6 +68,9 @@
# define NUM_RCU_LVL_2 0
# define NUM_RCU_LVL_3 0
# define NUM_RCU_LVL_4 0
+# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0 }
+# define RCU_NODE_NAME_INIT { "rcu_node_0" }
+# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0" }
#elif NR_CPUS <= RCU_FANOUT_2
# define RCU_NUM_LVLS 2
# define NUM_RCU_LVL_0 1
@@ -75,6 +78,9 @@
# define NUM_RCU_LVL_2 (NR_CPUS)
# define NUM_RCU_LVL_3 0
# define NUM_RCU_LVL_4 0
+# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1 }
+# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1" }
+# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1" }
#elif NR_CPUS <= RCU_FANOUT_3
# define RCU_NUM_LVLS 3
# define NUM_RCU_LVL_0 1
@@ -82,6 +88,9 @@
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_3 (NR_CPUS)
# define NUM_RCU_LVL_4 0
+# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2 }
+# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1", "rcu_node_2" }
+# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2" }
#elif NR_CPUS <= RCU_FANOUT_4
# define RCU_NUM_LVLS 4
# define NUM_RCU_LVL_0 1
@@ -89,6 +98,9 @@
# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
# define NUM_RCU_LVL_3 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
# define NUM_RCU_LVL_4 (NR_CPUS)
+# define NUM_RCU_LVL_INIT { NUM_RCU_LVL_0, NUM_RCU_LVL_1, NUM_RCU_LVL_2, NUM_RCU_LVL_3 }
+# define RCU_NODE_NAME_INIT { "rcu_node_0", "rcu_node_1", "rcu_node_2", "rcu_node_3" }
+# define RCU_FQS_NAME_INIT { "rcu_node_fqs_0", "rcu_node_fqs_1", "rcu_node_fqs_2", "rcu_node_fqs_3" }
#else
# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
#endif /* #if (NR_CPUS) <= RCU_FANOUT_1 */
--
1.8.3.1
next prev parent reply other threads:[~2015-06-03 6:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-03 6:18 [PATCH v3 0/9] rcu: Cleanup RCU tree initialization Alexander Gordeev
2015-06-03 6:18 ` [PATCH v3 1/9] rcu: Panic if RCU tree can not accommodate all CPUs Alexander Gordeev
2015-06-03 6:18 ` [PATCH v3 2/9] rcu: Remove superfluous local variable in rcu_init_geometry() Alexander Gordeev
2015-06-03 6:18 ` [PATCH v3 3/9] rcu: Cleanup rcu_init_geometry() code and arithmetics Alexander Gordeev
2015-06-03 6:18 ` [PATCH v3 4/9] rcu: Simplify rcu_init_geometry() capacity arithmetics Alexander Gordeev
2015-06-03 6:18 ` [PATCH v3 5/9] rcu: Limit rcu_state::levelcnt[] to RCU_NUM_LVLS items Alexander Gordeev
2015-06-03 6:18 ` [PATCH v3 6/9] rcu: Limit rcu_capacity[] size " Alexander Gordeev
2015-06-03 6:18 ` [PATCH v3 7/9] rcu: Remove unnecessary fields from rcu_state structure Alexander Gordeev
2015-06-03 6:18 ` Alexander Gordeev [this message]
2015-06-03 6:18 ` [PATCH v3 9/9] rcu: Simplify arithmetic to calculate number of RCU nodes Alexander Gordeev
2015-06-03 15:29 ` [PATCH v3 0/9] rcu: Cleanup RCU tree initialization Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5477cdbe107e04e7db4c7dbc0a22126caf167e5f.1433311943.git.agordeev@redhat.com \
--to=agordeev@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®