mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Boaz Harrosh <boaz@plexistor.com>
To: Ingo Molnar <mingo@redhat.com>,
	x86@kernel.org, linux-kernel <linux-kernel@vger.kernel.org>,
	"Roger C. Pao" <rcpao.enmotus@gmail.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-nvdimm <linux-nvdimm@ml01.01.org>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Matthew Wilcox <willy@linux.intel.com>,
	Andy Lutomirski <luto@amacapital.net>,
	Christoph Hellwig <hch@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Subject: [PATCH 5/8] mm: Let sparse_{add,remove}_one_section receive a node_id
Date: Thu, 05 Mar 2015 13:58:29 +0200	[thread overview]
Message-ID: <54F844E5.5090500@plexistor.com> (raw)
In-Reply-To: <54F830D4.7030205@plexistor.com>

From: Yigal Korman <yigal@plexistor.com>

Refactored the arguments of sparse_add_one_section / sparse_remove_one_section
to use node id instead of struct zone * - A memory section has no direct
connection to zones, all that was needed from zone was the node id.

This is for add_persistent_memory that will want a section of pages
allocated but without any zone associated. This is because belonging
to a zone will give the memory to the page allocators, but
persistent_memory belongs to a block device, and is not available for
regular volatile usage.

Signed-off-by: Yigal Korman <yigal@plexistor.com>
Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
---
 include/linux/memory_hotplug.h | 4 ++--
 mm/memory_hotplug.c            | 4 ++--
 mm/sparse.c                    | 9 +++++----
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 8f1a419..77ca3a4 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -265,8 +265,8 @@ extern int arch_add_memory(int nid, u64 start, u64 size);
 extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages);
 extern bool is_memblock_offlined(struct memory_block *mem);
 extern void remove_memory(int nid, u64 start, u64 size);
-extern int sparse_add_one_section(struct zone *zone, unsigned long start_pfn);
-extern void sparse_remove_one_section(struct zone *zone, struct mem_section *ms);
+extern int sparse_add_one_section(int nid, unsigned long start_pfn);
+extern void sparse_remove_one_section(int nid, struct mem_section *ms);
 extern struct page *sparse_decode_mem_map(unsigned long coded_mem_map,
 					  unsigned long pnum);
 
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 9fab107..7a73d30 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -472,7 +472,7 @@ static int __meminit __add_section(int nid, struct zone *zone,
 	if (pfn_valid(phys_start_pfn))
 		return -EEXIST;
 
-	ret = sparse_add_one_section(zone, phys_start_pfn);
+	ret = sparse_add_one_section(zone->zone_pgdat->node_id, phys_start_pfn);
 
 	if (ret < 0)
 		return ret;
@@ -738,7 +738,7 @@ static int __remove_section(struct zone *zone, struct mem_section *ms)
 	start_pfn = section_nr_to_pfn(scn_nr);
 	__remove_zone(zone, start_pfn);
 
-	sparse_remove_one_section(zone, ms);
+	sparse_remove_one_section(zone->zone_pgdat->node_id, ms);
 	return 0;
 }
 
diff --git a/mm/sparse.c b/mm/sparse.c
index d1b48b6..12a10ab 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -690,10 +690,10 @@ static void free_map_bootmem(struct page *memmap)
  * set.  If this is <=0, then that means that the passed-in
  * map was not consumed and must be freed.
  */
-int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn)
+int __meminit sparse_add_one_section(int nid, unsigned long start_pfn)
 {
 	unsigned long section_nr = pfn_to_section_nr(start_pfn);
-	struct pglist_data *pgdat = zone->zone_pgdat;
+	struct pglist_data *pgdat = NODE_DATA(nid);
 	struct mem_section *ms;
 	struct page *memmap;
 	unsigned long *usemap;
@@ -788,11 +788,11 @@ static void free_section_usemap(struct page *memmap, unsigned long *usemap)
 		free_map_bootmem(memmap);
 }
 
-void sparse_remove_one_section(struct zone *zone, struct mem_section *ms)
+void sparse_remove_one_section(int nid, struct mem_section *ms)
 {
 	struct page *memmap = NULL;
 	unsigned long *usemap = NULL, flags;
-	struct pglist_data *pgdat = zone->zone_pgdat;
+	struct pglist_data *pgdat = NODE_DATA(nid);
 
 	pgdat_resize_lock(pgdat, &flags);
 	if (ms->section_mem_map) {
@@ -807,5 +807,6 @@ void sparse_remove_one_section(struct zone *zone, struct mem_section *ms)
 	clear_hwpoisoned_pages(memmap, PAGES_PER_SECTION);
 	free_section_usemap(memmap, usemap);
 }
+
 #endif /* CONFIG_MEMORY_HOTREMOVE */
 #endif /* CONFIG_MEMORY_HOTPLUG */
-- 
1.9.3


  parent reply	other threads:[~2015-03-05 11:58 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-05 10:16 [PATCH 0/3 v5] e820: Fix handling of NvDIMM chips Boaz Harrosh
2015-03-05 10:20 ` [PATCH 1/3] e820: Don't let unknown DIMM type come out BUSY Boaz Harrosh
2015-03-05 20:41   ` Dan Williams
2015-03-09 10:54     ` Boaz Harrosh
2015-03-05 10:21 ` [PATCH 2/3] resource: Add new flag IORESOURCE_MEM_WARN Boaz Harrosh
2015-03-05 10:24 ` [PATCH 3/3] e820: Add the unknown-12 Memory type (DDR3-NvDIMM) Boaz Harrosh
2015-03-05 20:56   ` Dan Williams
2015-03-05 23:09     ` Andy Lutomirski
2015-03-09 12:10       ` Boaz Harrosh
2015-03-10  5:11         ` joeyli
2015-03-10  8:56           ` Boaz Harrosh
2015-03-10 13:19           ` Andy Lutomirski
2015-03-09 11:19     ` Boaz Harrosh
2015-03-09 14:44       ` Dan Williams
2015-03-09 15:14         ` Andy Lutomirski
2015-03-09 15:17           ` Dan Williams
2015-03-10  8:47             ` Boaz Harrosh
2015-03-05 10:32 ` [RFC 0/8] pmem: Submission of the Persistent memory block device Boaz Harrosh
2015-03-05 11:55   ` [PATCH 1/8] pmem: Initial version of persistent memory driver Boaz Harrosh
2015-03-05 20:35     ` Paul Bolle
2015-03-05 23:03     ` Andy Lutomirski
2015-03-09 12:20       ` Boaz Harrosh
2015-03-18 18:06         ` Andy Lutomirski
2015-03-26  4:00           ` Elliott, Robert (Server Storage)
2015-03-26  7:51             ` Boaz Harrosh
2015-03-26 21:31             ` Dave Chinner
2015-03-18 17:43     ` Ross Zwisler
2015-03-19  9:24       ` Boaz Harrosh
2015-03-20  0:11         ` Dan Williams
2015-03-05 11:55   ` [PATCH 2/8] pmem: KISS, remove register_blkdev Boaz Harrosh
2015-03-05 11:56   ` [PATCH 3/8] pmem: Add support for rw_page() Boaz Harrosh
2015-03-05 11:57   ` [PATCH 4/8] pmem: Add support for direct_access() Boaz Harrosh
2015-03-05 11:58   ` Boaz Harrosh [this message]
2015-03-06 18:43     ` [PATCH 5/8] mm: Let sparse_{add,remove}_one_section receive a node_id Ross Zwisler
2015-03-05 11:59   ` [PATCH 6/8] mm: New add_persistent_memory/remove_persistent_memory Boaz Harrosh
2015-03-05 11:59   ` [PATCH 7/8] pmem: Add support for page structs Boaz Harrosh
2015-03-23 20:59     ` Dan Williams
2015-03-05 12:01   ` [PATCH 8/8] OUT-OF-TREE: pmem: Allow request_mem to fail (BLK_DEV_PMEM_IGNORE_REQUEST_MEM_RET) Boaz Harrosh
2015-03-06 18:37   ` [RFC 0/8] pmem: Submission of the Persistent memory block device Ross Zwisler
2015-03-07  1:39     ` Christoph Hellwig
2015-03-09 12:41     ` Boaz Harrosh
2015-03-05 22:48 ` [PATCH 0/3 v5] e820: Fix handling of NvDIMM chips H. Peter Anvin
2015-03-05 23:06   ` Andy Lutomirski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54F844E5.5090500@plexistor.com \
    --to=boaz@plexistor.com \
    --cc=dan.j.williams@intel.com \
    --cc=hch@infradead.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@ml01.01.org \
    --cc=luto@amacapital.net \
    --cc=mingo@redhat.com \
    --cc=rcpao.enmotus@gmail.com \
    --cc=ross.zwisler@linux.intel.com \
    --cc=tglx@linutronix.de \
    --cc=willy@linux.intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome