mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lucas Tanure <tanure@linux.com>
To: Conor Dooley <conor@kernel.org>, xianwei.zhao@amlogic.com
Cc: Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	netdev@vger.kernel.org
Subject: Re: [PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support
Date: Sun, 4 Oct 2026 16:35:26 +0100	[thread overview]
Message-ID: <54b064f8-8e01-44da-be40-4125620ff9d0@linux.com> (raw)
In-Reply-To: <4460ec4a-1a28-4481-a33e-3fe72f68bf58@linux.com>

On 04/10/2026 15:06, Lucas Tanure wrote:
> On 24/09/2026 18:21, Conor Dooley wrote:
>> On Thu, Sep 24, 2026 at 05:51:09AM +0000, Xianwei Zhao via B4 Relay 
>> wrote:
>>> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>
>>> Add the T7 compatible to the Meson DWMAC binding.
>>>
>>> The T7 DWMAC controller requires the following compatible combination:
>>>
>>> amlogic,t7-dwmac
>>> amlogic,meson-axg-dwmac
>>> snps,dwmac-4.00
>>>
>>> Add a conditional schema check to enforce this compatible combination
>>> when amlogic,t7-dwmac is used.
>>>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>> ---
>>>   .../devicetree/bindings/net/amlogic,meson-dwmac.yaml    | 17 ++++++ 
>>> +++++++++++
>>>   1 file changed, 17 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson- 
>>> dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson- 
>>> dwmac.yaml
>>> index 5c91716d1f21..b529ca5577a9 100644
>>> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>>> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
>>> @@ -23,11 +23,24 @@ select:
>>>             - amlogic,meson-gxbb-dwmac
>>>             - amlogic,meson-axg-dwmac
>>>             - amlogic,meson-g12a-dwmac
>>> +          - amlogic,t7-dwmac
>>>     required:
>>>       - compatible
>>>   allOf:
>>>     - $ref: snps,dwmac.yaml#
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            const: amlogic,t7-dwmac
>>> +    then:
>>> +      properties:
>>> +        compatible:
>>> +          items:
>>> +            - const: amlogic,t7-dwmac
>>> +            - const: amlogic,meson-axg-dwmac
>>> +            - const: snps,dwmac-4.00
>>
>> This is not how fallback compatibles are described.
>>
>> Instead of doing this, which affects all other compatibles in the file
>> by allowing dwmac-4.00 for all devices, please do this the normal way.
>> dwmac isn't special, it's just this binding that's weird!
>> Can whats currently in the binding (before this patch) be largely
>> replaced by just doing:
>>    compatible:
>>      oneOf:
>>        - items:
>>            - enum:
>>                - amlogic,meson8b-dwmac
>>                - amlogic,meson-gxbb-dwmac
>>                - amlogic,meson-axg-dwmac
>>                - amlogic,meson-g12a-dwmac
>>            - const: snps,dwmac-3.70a
>>            - const: snps,dwmac
>>        - items:
>>            - enum:
>>                - amlogic,meson6-dwmac
>>                - amlogic,meson8m2-dwmac
>>            - const: snps,dwmac
>>
>> You'll have to check this yourself against the amlogic devicetrees and
>> see if this is correct, but with this you should be able to add your new
>> device without doing anything special.
> 
> I have the same patch in my T7 work and checked it against the amlogic 
> device trees: meson6 and meson8m2 use the two entry form, the rest add 
> snps,dwmac-3.70a. dt_binding_check and dtbs_check are clean. The example 
> needs fixing.
> 
> Xianwei, from my VIM4: the MAC reports Synopsys ID 0x51, DWMAC_CORE_5_10
> in common.h, so the core is 5.10a, not 4.00. And the controller reaches
> DRAM through a pipeline stage. Nothing claims its gate, sys_ampipe_eth,
> so clk_disable_unused switches it off. My node lists it as a fourth
> clock. Does the AN400 differ?
> 
> I will send my series today so the code is on the list. Not a race: I
> will drop or rebase whatever overlaps once you tell me.
> 
> Thanks,
> Lucas
My Ethernet patches 
https://lore.kernel.org/linux-amlogic/20261004144046.391444-1-tanure@linux.com 


> 
>>
>> pw-bot: changes-requested
>>
>> Thanks,
>> Conor.
>>
>>>     - if:
>>>         properties:
>>>           compatible:
>>> @@ -38,6 +51,7 @@ allOf:
>>>                 - amlogic,meson-gxbb-dwmac
>>>                 - amlogic,meson-axg-dwmac
>>>                 - amlogic,meson-g12a-dwmac
>>> +              - amlogic,t7-dwmac
>>>       then:
>>>         properties:
>>> @@ -93,6 +107,7 @@ allOf:
>>>                 - amlogic,meson8m2-dwmac
>>>                 - amlogic,meson-gxbb-dwmac
>>>                 - amlogic,meson-axg-dwmac
>>> +              - amlogic,t7-dwmac
>>>       then:
>>>         properties:
>>>           rx-internal-delay-ps:
>>> @@ -139,8 +154,10 @@ properties:
>>>             - amlogic,meson-gxbb-dwmac
>>>             - amlogic,meson-axg-dwmac
>>>             - amlogic,meson-g12a-dwmac
>>> +          - amlogic,t7-dwmac
>>>       contains:
>>>         enum:
>>> +        - snps,dwmac-4.00
>>>           - snps,dwmac-3.70a
>>>           - snps,dwmac
>>>
>>> -- 
>>> 2.52.0
>>>
>>>


  reply	other threads:[~2026-10-04 15:35 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-24  5:51 [PATCH v2 0/3] t7: add some nodes for Amlogc t7 Xianwei Zhao via B4 Relay
2026-09-24  5:51 ` [PATCH v2 1/3] spi: dt-bindings: amlogic,meson-gx-spicc: add T7 compatible Xianwei Zhao via B4 Relay
2026-09-24  5:51 ` [PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support Xianwei Zhao via B4 Relay
2026-09-24 17:21   ` Conor Dooley
2026-10-04 14:06     ` Lucas Tanure
2026-10-04 15:35       ` Lucas Tanure [this message]
2026-09-24  5:51 ` [PATCH v2 3/3] arm64: dts: amlogic: add T7 peripheral nodes Xianwei Zhao via B4 Relay
2026-09-24 11:33   ` Ronald Claveau
2026-09-28 16:29 ` (subset) [PATCH v2 0/3] t7: add some nodes for Amlogc t7 Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54b064f8-8e01-44da-be40-4125620ff9d0@linux.com \
    --to=tanure@linux.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=conor@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=xianwei.zhao@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®