From: "David Hildenbrand (Arm)" <david@kernel.org>
To: Kyle Zeng <kylebot@openai.com>, linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
Zi Yan <ziy@nvidia.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
Nico Pache <nico.pache@linux.dev>,
Ryan Roberts <ryan.roberts@arm.com>, Dev Jain <dev.jain@arm.com>,
Barry Song <baohua@kernel.org>, Lance Yang <lance.yang@linux.dev>,
Usama Arif <usama.arif@linux.dev>,
Kiryl Shutsemau <kas@kernel.org>,
stable@vger.kernel.org
Subject: Re: [PATCH] mm/huge_memory: avoid transient none PMDs during lazyfree reclaim
Date: Fri, 9 Oct 2026 20:00:51 +0200 [thread overview]
Message-ID: <54b5a63d-34fc-4bd8-beaf-19673c8b6ad7@kernel.org> (raw)
In-Reply-To: <20261009165214.40212-2-kylebot@openai.com>
On 10/9/26 18:52, Kyle Zeng wrote:
> __discard_anon_folio_pmd_locked() clears and flushes a huge PMD before
> checking whether the folio can be discarded. If the folio was redirtied
> or has unexpected references, it restores the original PMD. Reclaim holds
> the PMD lock and the anon_vma read lock, but not the owning mmap_lock.
>
> Both zap_pmd_range() and mremap's get_old_pmd() can skip a none PMD
> without taking its lock. A concurrent munmap() or whole-VMA
> MREMAP_DONTUNMAP can therefore miss the PMD and later unlink the source
> VMA from its anon_vma, leaving a restored mapping behind. The anon_vma
> write lock taken by unlink_anon_vmas() waits for reclaim to finish, but
> does not repeat the skipped page-table walk. Once the remaining VMA
> links are removed, the folio's positive mapcount no longer guarantees a
> live anon_vma. Racing lazyfree reclaim against MREMAP_DONTUNMAP as an
> unprivileged user reproduces a KASAN use-after-free in
> folio_lock_anon_vma_read().
>
> Use pmdp_invalidate() to keep a recognizable, non-none huge PMD while
> the discard can still fail. Concurrent unmap and move operations then
> have to synchronize on the PMD lock instead of skipping the mapping.
> Clear the invalidated PMD only after the dirty and reference checks have
> succeeded, before removing the rmap and withdrawing the deposited page
> table. The full invalidation retains the TLB flush required for the
> dirty and GUP-fast checks.
>
> Fixes: 735ecdfaf4e8 ("mm/vmscan: avoid split lazyfree THP during shrink_folio_list()")
> Cc: stable@vger.kernel.org
> Assisted-by: Codex:gpt-6-astra
> Signed-off-by: Kyle Zeng <kylebot@openai.com>
> ---
> mm/huge_memory.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index 1e5d68acf62a..20262195385a 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -3569,11 +3569,17 @@ static bool __discard_anon_folio_pmd_locked(struct vm_area_struct *vma,
> return false;
> }
>
> - orig_pmd = pmdp_huge_clear_flush(vma, addr, pmdp);
> + /*
> + * The discard may fail, so keep the PMD non-none until we're
> + * committed to discarding it. Otherwise, concurrent munmap() or
> + * mremap() can skip the PMD without taking the PTL and later unlink
> + * the VMA from its anon_vma despite a restored mapping.
> + */
You can drop the entire comment. This is what we should do in most cases where
the mapping might be restored/changed, for example, in set_pmd_migration_entry().
> + orig_pmd = pmdp_invalidate(vma, addr, pmdp);
>
> /*
> * Syncing against concurrent GUP-fast:
> - * - clear PMD; barrier; read refcount
> + * - invalidate PMD; barrier; read refcount
> * - inc refcount; barrier; read PMD
> */
> smp_mb();
> @@ -3607,6 +3613,7 @@ static bool __discard_anon_folio_pmd_locked(struct vm_area_struct *vma,
> return false;
> }
>
> + pmdp_huge_get_and_clear(mm, addr, pmdp);
> folio_remove_rmap_pmd(folio, pmd_page(orig_pmd), vma);
> zap_deposited_table(mm, pmdp);
> add_mm_counter(mm, MM_ANONPAGES, -HPAGE_PMD_NR);
Thanks!
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
--
Cheers,
David
next prev parent reply other threads:[~2026-10-09 18:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 16:52 Kyle Zeng
2026-10-09 18:00 ` David Hildenbrand (Arm) [this message]
2026-10-09 18:17 ` Zi Yan
2026-10-09 20:23 ` David Hildenbrand (Arm)
2026-10-09 20:27 ` Zi Yan
2026-10-09 20:44 ` David Hildenbrand (Arm)
2026-10-10 1:12 ` Lance Yang
2026-10-10 1:56 ` Zi Yan
2026-10-10 2:04 ` Lance Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54b5a63d-34fc-4bd8-beaf-19673c8b6ad7@kernel.org \
--to=david@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=dev.jain@arm.com \
--cc=kas@kernel.org \
--cc=kylebot@openai.com \
--cc=lance.yang@linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nico.pache@linux.dev \
--cc=ryan.roberts@arm.com \
--cc=stable@vger.kernel.org \
--cc=usama.arif@linux.dev \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®