Re: [PATCH v1 3/3] arm64: dts: qcom: x1e80100-qcp: Add power control and sideband signals for PCIe3

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

On 20/03/2025 05:55, Wenbin Yao wrote:
> From: Qiang Yu <quic_qianyu@quicinc.com>
> 
> Add perst, wake and clkreq sideband signals and required regulators in
> PCIe3 controller and PHY device tree node. Describe the voltage rails of
> the x8 PCI slots for PCIe3 port.
> 
> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> Signed-off-by: Wenbin Yao <quic_wenbyao@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 119 ++++++++++++++++++++++
>   1 file changed, 119 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
> index 28086a2bc..9cd313802 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
> @@ -318,6 +318,48 @@ vreg_wcn_3p3: regulator-wcn-3p3 {
>   		regulator-boot-on;
>   	};
> 
> +	vreg_pcie_12v: regulator-pcie_12v {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "VREG_PCIE_12V";
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +
> +		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie_x8_12v>;
> +	};
> +
> +	vreg_pcie_3v3_aux: regulator-pcie_3v3_aux {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "VREG_PCIE_3P3_AUX";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pm_sde7_aux_3p3_en>;
> +	};
> +
> +	vreg_pcie_3v3: regulator-pcie_3v3 {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "VREG_PCIE_3P3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pm_sde7_main_3p3_en>;
> +};
> +
>   	usb-1-ss0-sbu-mux {
>   		compatible = "onnn,fsusb42", "gpio-sbu-mux";
> 
> @@ -907,6 +949,60 @@ &mdss_dp3_phy {
>   	status = "okay";
>   };
> 
> +&pm8550ve_8_gpios {
> +	pcie_x8_12v: pcie-12v-default-state {
> +		pins = "gpio8";
> +		function = "normal";
> +		output-enable;
> +		output-high;
> +		bias-pull-down;
> +		power-source = <0>;
> +	};
> +};
> +
> +&pmc8380_3_gpios {
> +	pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
> +		pins = "gpio8";
> +		function = "normal";
> +		output-enable;
> +		output-high;
> +		bias-pull-down;
> +		power-source = <0>;
> +	};
> +
> +	pm_sde7_main_3p3_en: pcie-main-3p3-default-state {
> +		pins = "gpio6";
> +		function = "normal";
> +		output-enable;
> +		output-high;
> +		bias-pull-down;
> +		power-source = <0>;
> +	};
> +};
> +
> +&pcie3 {
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie3_default>;
> +	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
> +	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +};
> +
> +&pcie3_phy {
> +	vdda-phy-supply = <&vreg_l3j_0p8>;
> +	vdda-pll-supply = <&vreg_l3e_1p2>;
> +	vdda-qref-supply = <&vreg_l3c_0p8>;
> +
> +	status = "okay";
> +};
> +
> +&pcie3port {
> +	vpcie12v-supply = <&vreg_pcie_12v>;
> +	vpcie3v3-supply = <&vreg_pcie_3v3>;
> +	vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>;
> +};
> +
>   &pcie4 {
>   	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
>   	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
> @@ -1118,6 +1214,29 @@ nvme_reg_en: nvme-reg-en-state {
>   		bias-disable;
>   	};
> 
> +	pcie3_default: pcie3-default-state {
> +		clkreq-n-pins {
> +			pins = "gpio144";
> +			function = "pcie3_clk";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		perst-n-pins {
> +			pins = "gpio143";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-down;
> +		};
> +
> +		wake-n-pins {
> +		       pins = "gpio145";
> +		       function = "gpio";
> +		       drive-strength = <2>;
> +		       bias-pull-up;
> +		};
> +	};
> +
>   	pcie4_default: pcie4-default-state {
>   		clkreq-n-pins {
>   			pins = "gpio147";
> --
> 2.34.1
> 
> 

Recommend breaking this patch into at least two patches @ the and

-> Add power control
-> Add sideband signals

if your patch title requires an and its usually a good indicator of a 
place to break that patch into different parts.

---
bod