[RFC PATCH v3 1/3] PCI: rockchip-host: reorder rockchip_pcie_set_vpcie()

[Geraldo Nascimento <geraldogabriel@gmail.com>]

rockchip_pcie_set_vpcie() is needed for re-enabling power regulators
after disabling them, if link training fails. This permits quirky
endpoint devices to complete link training, enumerate sucessfully
on the PCI bus and generally work with RK3399 PCIe.

Reorder the function - no functional change intended.

Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
---
 drivers/pci/controller/pcie-rockchip-host.c | 94 ++++++++++-----------
 1 file changed, 47 insertions(+), 47 deletions(-)

diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index b9e7a8710cf0..2a1071cd3241 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -284,6 +284,53 @@ static void rockchip_pcie_set_power_limit(struct rockchip_pcie *rockchip)
 	rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_DCR);
 }
 
+static int rockchip_pcie_set_vpcie(struct rockchip_pcie *rockchip)
+{
+	struct device *dev = rockchip->dev;
+	int err;
+
+	if (!IS_ERR(rockchip->vpcie12v)) {
+		err = regulator_enable(rockchip->vpcie12v);
+		if (err) {
+			dev_err(dev, "fail to enable vpcie12v regulator\n");
+			goto err_out;
+		}
+	}
+
+	if (!IS_ERR(rockchip->vpcie3v3)) {
+		err = regulator_enable(rockchip->vpcie3v3);
+		if (err) {
+			dev_err(dev, "fail to enable vpcie3v3 regulator\n");
+			goto err_disable_12v;
+		}
+	}
+
+	err = regulator_enable(rockchip->vpcie1v8);
+	if (err) {
+		dev_err(dev, "fail to enable vpcie1v8 regulator\n");
+		goto err_disable_3v3;
+	}
+
+	err = regulator_enable(rockchip->vpcie0v9);
+	if (err) {
+		dev_err(dev, "fail to enable vpcie0v9 regulator\n");
+		goto err_disable_1v8;
+	}
+
+	return 0;
+
+err_disable_1v8:
+	regulator_disable(rockchip->vpcie1v8);
+err_disable_3v3:
+	if (!IS_ERR(rockchip->vpcie3v3))
+		regulator_disable(rockchip->vpcie3v3);
+err_disable_12v:
+	if (!IS_ERR(rockchip->vpcie12v))
+		regulator_disable(rockchip->vpcie12v);
+err_out:
+	return err;
+}
+
 /**
  * rockchip_pcie_host_init_port - Initialize hardware
  * @rockchip: PCIe port information
@@ -613,53 +660,6 @@ static int rockchip_pcie_parse_host_dt(struct rockchip_pcie *rockchip)
 	return 0;
 }
 
-static int rockchip_pcie_set_vpcie(struct rockchip_pcie *rockchip)
-{
-	struct device *dev = rockchip->dev;
-	int err;
-
-	if (!IS_ERR(rockchip->vpcie12v)) {
-		err = regulator_enable(rockchip->vpcie12v);
-		if (err) {
-			dev_err(dev, "fail to enable vpcie12v regulator\n");
-			goto err_out;
-		}
-	}
-
-	if (!IS_ERR(rockchip->vpcie3v3)) {
-		err = regulator_enable(rockchip->vpcie3v3);
-		if (err) {
-			dev_err(dev, "fail to enable vpcie3v3 regulator\n");
-			goto err_disable_12v;
-		}
-	}
-
-	err = regulator_enable(rockchip->vpcie1v8);
-	if (err) {
-		dev_err(dev, "fail to enable vpcie1v8 regulator\n");
-		goto err_disable_3v3;
-	}
-
-	err = regulator_enable(rockchip->vpcie0v9);
-	if (err) {
-		dev_err(dev, "fail to enable vpcie0v9 regulator\n");
-		goto err_disable_1v8;
-	}
-
-	return 0;
-
-err_disable_1v8:
-	regulator_disable(rockchip->vpcie1v8);
-err_disable_3v3:
-	if (!IS_ERR(rockchip->vpcie3v3))
-		regulator_disable(rockchip->vpcie3v3);
-err_disable_12v:
-	if (!IS_ERR(rockchip->vpcie12v))
-		regulator_disable(rockchip->vpcie12v);
-err_out:
-	return err;
-}
-
 static void rockchip_pcie_enable_interrupts(struct rockchip_pcie *rockchip)
 {
 	rockchip_pcie_write(rockchip, (PCIE_CLIENT_INT_CLI << 16) &
-- 
2.49.0