From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1753071AbbD0PR0 (ORCPT <rfc822;w@1wt.eu>);
	Mon, 27 Apr 2015 11:17:26 -0400
Received: from exprod5og122.obsmtp.com ([64.18.0.192]:58411 "EHLO
	exprod5og122.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1753036AbbD0PRV (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Mon, 27 Apr 2015 11:17:21 -0400
Message-ID: <553E52FB.7040809@globallogic.com>
Date: Mon, 27 Apr 2015 18:17:15 +0300
From: "Ivan.khoronzhuk" <ivan.khoronzhuk@globallogic.com>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
MIME-Version: 1.0
To: Jean Delvare <jdelvare@suse.de>, LKML <linux-kernel@vger.kernel.org>
CC: Roy Franz <roy.franz@linaro.org>, Matt Fleming <matt.fleming@intel.com>
Subject: Re: [PATCH] firmware: dmi_scan: Trim DMI table length before exporting
 it
References: <20150426224726.19888863@endymion.delvare>
In-Reply-To: <20150426224726.19888863@endymion.delvare>
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Hi, Jean

On 26.04.15 23:47, Jean Delvare wrote:
> The SMBIOS v3 entry points specify a maximum length for the DMI table,
> not the exact length. Thus there may be garbage after the end-of-table
> marker, which we don't want to export to user-space. Adjust dmi_len
> when we find the end-of-table marker, so that only the actual table
> payload is exported.

According to above it seems that change doesn't affect SMBIOS < 3.

>
> Signed-off-by: Jean Delvare <jdelvare@suse.de>
> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com>
> ---
>   drivers/firmware/dmi_scan.c |   15 ++++++++++-----
>   1 file changed, 10 insertions(+), 5 deletions(-)
>
> --- linux-4.1-rc0.orig/drivers/firmware/dmi_scan.c	2015-04-26 18:56:15.657111185 +0200
> +++ linux-4.1-rc0/drivers/firmware/dmi_scan.c	2015-04-26 22:42:59.183547584 +0200
> @@ -108,15 +108,19 @@ static void dmi_decode_table(u8 *buf,
>   		if (data - buf < dmi_len - 1)
>   			decode(dm, private_data);
>   
> +		data += 2;
> +		i++;
> +
>   		/*
>   		 * 7.45 End-of-Table (Type 127) [SMBIOS reference spec v3.0.0]
>   		 */
>   		if (dm->type == DMI_ENTRY_END_OF_TABLE)
>   			break;
> -
> -		data += 2;
> -		i++;
>   	}
> +
> +	/* Trim DMI table length if needed */
> +	if (dmi_len > data - buf)
> +		dmi_len = data - buf;

Why is it checked here? Wouldn't be better to simply assign: dmi_len = 
data - buf;
I guess it's supposed to not trim table in case of exit by i<dmi_num or 
even !dmi_num.
But in this case, probably, it be better to do it in the cycle:

if (dmi->type == DMI_ENTRY_END_OF_TABLE) {
     dmi_len = data - buf;
     break;
}

just to avoid redundant check.

But question is, what if we exit by i<dmi_num?
Wouldn't be better to trim buffer in such case also?

>   }
>   
>   static phys_addr_t dmi_base;
> @@ -125,8 +129,9 @@ static int __init dmi_walk_early(void (*
>   		void *))
>   {
>   	u8 *buf;
> +	u32 orig_dmi_len = dmi_len;
>   
> -	buf = dmi_early_remap(dmi_base, dmi_len);
> +	buf = dmi_early_remap(dmi_base, orig_dmi_len);
>   	if (buf == NULL)
>   		return -1;
>   
> @@ -134,7 +139,7 @@ static int __init dmi_walk_early(void (*
>   
>   	add_device_randomness(buf, dmi_len);
>   
> -	dmi_early_unmap(buf, dmi_len);
> +	dmi_early_unmap(buf, orig_dmi_len);
>   	return 0;
>   }
>   
>

-- 
Regards,
Ivan Khoronzhuk