From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1754207AbbG2WqR (ORCPT <rfc822;w@1wt.eu>);
	Wed, 29 Jul 2015 18:46:17 -0400
Received: from smtp.codeaurora.org ([198.145.29.96]:43796 "EHLO
	smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1753849AbbG2WqO (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Wed, 29 Jul 2015 18:46:14 -0400
Message-ID: <55B957B4.40501@codeaurora.org>
Date: Wed, 29 Jul 2015 15:46:12 -0700
From: Stephen Boyd <sboyd@codeaurora.org>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130329 Thunderbird/17.0.5
MIME-Version: 1.0
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
CC: agross@codeaurora.org, linux-arm-msm@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
        Mark Rutland <mark.rutland@arm.com>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Kumar Gala <galak@codeaurora.org>,
        Russell King <linux@arm.linux.org.uk>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Rob Clark <robdclark@gmail.com>
Subject: Re: [PATCH v1 7/7] ARM: dts: ifc6410: add inforce LVDS panel support
References: <1438087956-17307-1-git-send-email-srinivas.kandagatla@linaro.org> <1438088076-17606-1-git-send-email-srinivas.kandagatla@linaro.org>
In-Reply-To: <1438088076-17606-1-git-send-email-srinivas.kandagatla@linaro.org>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On 07/28/2015 05:54 AM, Srinivas Kandagatla wrote:
> +
> +		panel_3p3v: panel_3p3v {
> +			compatible = "regulator-fixed";
> +			pinctrl-0 = <&disp_en_gpios>;
> +			pinctrl-names = "default";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-name = "panel_en_3p3v";
> +			regulator-type = "voltage";
> +			startup-delay-us = <0>;
> +			gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +			regulator-boot-on;
> +		};

We should put gpio regulators into their own container in the root of 
the tree. Similar to what was done for 8960 gpio regulators.

> +
> +		backlight: backlight{
> +			pinctrl-0 = <&pwm_bl_gpios>;
> +			pinctrl-names = "default";
> +			compatible = "gpio-backlight";
> +			gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
> +			default-on;
> +		};
> +
> +		panel: auo,b101xtn01 {
> +			status = "okay";
> +			compatible = "auo,b101xtn01";
> +
> +			ddc-i2c-bus = <&i2c3>;
> +			backlight = <&backlight>;
> +			power-supply = <&panel_3p3v>;
>   		};

These two nodes shouldn't be under the SoC node. They don't have 
registers so they should be at the root of the tree. And we don't need 
to put labels twice on nodes. If we're modifying things in board 
specific dtsi files it should be fine to leave the label off if the 
label is in the SoC dtsi file.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project