Re: [PATCH v4 1/2] Documentation: dt: Add Xilinx zynqmp dma device tree binding documentation

[Lars-Peter Clausen <lars@metafoo.de>]

On 08/06/2015 05:19 AM, Punnaiah Choudary Kalluri wrote:
[...]
> +Optional properties:
> +- xlnx,include-sg: Indicates the controller to operate in simple or scatter
> +		   gather dma mode
> +- xlnx,ratectrl: Scheduling interval in terms of clock cycles for
> +		 source AXI transaction
> +- xlnx,overfetch: Tells whether the channel is allowed to over fetch the data
> +- xlnx,src-issue: Number of AXI outstanding transactions on source side
> +- xlnx,desc-axi-cohrnt: Tells whether the AXI transactions generated for the
> +			descriptor read are marked Non-coherent
> +- xlnx,src-axi-cohrnt: Tells whether the AXI transactions generated for the
> +			source descriptor payload are marked Non-coherent
> +- xlnx,dst-axi-cohrnt: Tells whether the AXI transactions generated for the
> +			dst descriptor payload are marked Non-coherent
> +- xlnx,desc-axi-qos: AXI QOS bits to be used for descriptor fetch
> +- xlnx,src-axi-qos: AXI QOS bits to be used for data read
> +- xlnx,dst-axi-qos: AXI QOS bits to be used for data write
> +- xlnx,desc-axi-cache: AXI cache bits to be used for descriptor fetch.
> +- xlnx,desc-axi-cache: AXI cache bits to be used for data read
> +- xlnx,desc-axi-cache: AXI cache bits to be used for data write
> +- xlnx,src-burst-len: AXI length for data read. Support only power of 2 values
> +		      i.e 1,2,4,8 and 16
> +- xlnx,dst-burst-len: AXI length for data write. Support only power of 2 values
> +		      i.e 1,2,4,8 and 16

None of these really belong into the devicetree. This is all runtime
configuration data.

- Lars